Commit Graph

313 Commits

Author SHA1 Message Date
David E. O'Brien
5e6220d9d0 * include/elf.h has been repo copied to include/elf-hints.h, and it no
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.

This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
2001-05-02 23:56:21 +00:00
Ruslan Ermilov
aa7664372f MAN[1-9] -> MAN. 2001-03-27 11:59:22 +00:00
John Baldwin
b833d157c7 Always disable paging when exiting back to real mode after receiving a
fatal trap.  Also, reload the GDT register to point to BTX's GDT before
playing around with the segment registers to return to real mode.  This is
helpful if the kernel causes a fatal exception before it has setup its own
IDT and fault handlers.  For example, if one happens to break mtx_init().
Without these changes BTX would recursively page fault (if paging was not
disabled) or triple fault and reset the CPU (without the GDT reload)
instead of providing a potentially useful register dump.

Reviewed by:	rnordier
2001-03-21 20:08:07 +00:00
Paul Saab
c6fe53998a Don't set the gateway address if the netmask is zero or we're on
the same network.  PXE does not do netmask calculations, so if the
gateway is set it will use it.

Submitted by:	peter & FreeBSD cluster ACLs
2001-03-14 23:53:25 +00:00
Jeroen Ruigrok van der Werven
7c63796828 Preceed/preceeding are not english words. Use precede or preceding. 2001-02-18 10:25:42 +00:00
Jeroen Ruigrok van der Werven
1a6e52d0e9 Fix typo: seperate -> separate.
Seperate does not exist in the english language.
2001-02-06 11:21:58 +00:00
Robert Nordier
1165e4c9a4 Fix column alignment (whitespace-only change). 2000-12-19 00:17:36 +00:00
Robert Nordier
81578f4a33 Strip the .comment and .note sections when stripping. There's no
point in retaining this info, particularly under BTX.
2000-12-13 17:10:38 +00:00
Robert Nordier
1ec5afb81e Add a magic number, for easier identification of boot0. At present,
this is used only by libdisk.
2000-12-12 17:27:35 +00:00
John Baldwin
0a7f15c202 Set the proper bit in the howto flags for a serial console rather than
setting the index of the bit.  (0xc vs. 0x1000)
2000-11-30 18:33:59 +00:00
Paul Saab
43ab35c8c7 Add support for probing the keyboard from pxeboot which will behave
exactly the same as passing -P to boot2.

Submitted by:	jhb
2000-11-30 14:55:10 +00:00
Ruslan Ermilov
f4d874a1db mdoc(7) police: do not split author names in the AUTHORS section. 2000-11-22 09:35:58 +00:00
Ruslan Ermilov
251c176f41 mdoc(7) police: use certified section headers wherever possible. 2000-11-17 11:44:16 +00:00
Paul Saab
3d122d8e2c Honor the ip address given in the root-path dhcp option.
PR:	21743
Submitted by:	Brian Candler <B.Candler@pobox.com>
2000-11-05 14:55:09 +00:00
Robert Nordier
9e3377b8b3 Support a.out: avoid (%dx) in in/out instructions, and use an m4
macro to supply underscores for externals.
2000-11-04 13:03:52 +00:00
Paul Saab
9193b12844 MF4: Add LOADER_TFTP_SUPPORT make.conf flag. 2000-11-04 08:43:13 +00:00
John Baldwin
f251e6cfa1 The Number of Fixed Disks at memory location 0x475 is only 1 byte, not a
2 byte word.  This fixes machines that probe 30-odd hard drives during boot
in the loader.

Submitted by:	Helpful folks at Tyan via ps
2000-11-02 23:28:12 +00:00
Matthew Hunt
26b5d23688 "it's" --> "its" (possessive).
Correct a malformed sentence.
2000-11-01 00:36:12 +00:00
Robert Nordier
8c964b9bca Go back to occupying just a single sector, reverting r1.17 - r1.20.
Taking over the sector following the MBR causes problems on some
machines, and the actual gains are fairly small in terms of how
the space is presently used.

Since we need a number of further features (eg. handling extended
partitions) that can't be readily accommodated in the basic boot0
design anyway, rather choose to implement the additional stuff
separately and concentrate on compatibility rather than features
here.
2000-10-02 17:30:22 +00:00
Robert Nordier
ce6a6a0f90 Set MAINTAINER. 2000-10-02 17:23:16 +00:00
Archie Cobbs
474afc4230 Add support for the "nullconsole" console type, for systems with
neither a video console nor a serial port. Use it if the RB_MUTE
flag is set.

Submitted by:	Doug Ambrisko <ambrisko@whistle.com>
Reviewed by:	jhb
2000-09-20 18:13:36 +00:00
Daniel C. Sobral
9714dd1a3a Bump up version as a result of the recent changes to kernel path,
and boot-conf&boot semantic changes.

Also, make it 1.0.

Reminded by: peter (even though he doesn't know it)
2000-09-10 13:51:44 +00:00
Robert Nordier
3348fae50d Correct BSD/OS slice type.
PR:           21099
Submitted by: Alan Clegg <abc@bsdi.com>
2000-09-09 18:05:22 +00:00
Warner Losh
799c0f62dd Look for libstand in the built tree rather than in /usr/lib. This
likely could be done better, but the tree is broken and I wanted to
get a fix into the tree.

Reviewed by: msmith
2000-09-08 04:26:55 +00:00
Mike Smith
0153af6a16 Fix a bug which prevents parsing this Makefile without having a
previously-built loader binary elsewhere.
2000-09-05 22:33:07 +00:00
Mike Smith
bb65fdf6e0 Export the salient configuration items in a non-pxe-specific namespace
to allow commonality between varying platforms.  This is a step
towards parsing the diskless configuration information with MI code
inside the kernel.

Export the interface hardware address to the kernel, so that it is possible
to determine the boot interface with certainty.

Export the NFS filehandle for the root mount to the kernel, so that the
kernel does not need to perform a mount RPC call.
2000-09-05 22:32:31 +00:00
John Baldwin
6bd9abd49a Add a new compile-time tweak to BTX. If you set the make(1) variable
BOOT_BTX_NOHANG, then BTX will be compiled with the appropriate flags so
that it reboots after a fault instead of hanging forever.

Requested by:	ps
Approved by:	rnordier
2000-08-24 20:57:44 +00:00
Peter Wemm
5aef48a16b Add -mpreferred-stack-boundary=2 to CFLAGS for i386. This and libstand
reduces /boot/loader from 163840 bytes to 155648 and pxeboot from 165888
bytes to 157696 bytes.
2000-08-11 23:23:20 +00:00
Paul Saab
646cf5017b Add support to send the string 'PXEClient' as the Vendor class
identifier to the DHCP server.  Now you can check for this string
in your dhcp configuration to decide whether you will hand out a
lease to the client or not.
2000-08-11 08:36:17 +00:00
Paul Saab
f6940c1842 Pass along the interesting variables we were given from DHCP so we
can utilize them in the kernel and with kenv.
2000-08-11 05:31:59 +00:00
Robert Nordier
ff7ed3a234 Typo/spelling fixes. 2000-08-08 07:20:25 +00:00
John Baldwin
ab9e9f9d2d Argh! Fix a brainfart of mine. In the old boot0, we relocated ourself
to 0x600 via a 'rep movsw'.  Once that was done, %cx was zero, so we could
simply use 'movb' to update the lower byte of %cx in preparation for
zeroing out the fake partition entry used to boot to other drives via F5.
Well, in the new boot0, we don't actually relocate ourselves, instead it
is easier to create the fake partition entry first and then just use it to
get the BIOS to load all of boot0 into memory at 0x600.  However, since we
aren't doing the relocate code anymore, we don't know that %cx == 0 when
we hit the 'movb' to setup %cx for clearning the fake partition entry.
Thus, if %ch != 0 when the BIOS started boot0, then it would end up zeroing
a lot more memory than just 8 words.  The solution is to do a word move of
$8 into %cx.

Debugging help from:	David Wolfskill <dhw@whistle.com>
2000-08-04 22:37:21 +00:00
John Baldwin
4ae4202e70 Cleanup warnings. Most of these are signed/unsigned warnings, as well as
some added const's.
2000-08-03 09:14:02 +00:00
John Baldwin
c2fa9f3e89 Fix several BDECFLAGS warnings. Also, actually use the 'verbose' parameter
for lsdev when printing out slice information.  Now, you only get the
sizes and LBA's of slices if you use 'lsdev -v'.
2000-08-03 09:09:49 +00:00
John Baldwin
f15da231c5 Oops. Remove some debugging code used to display a hexdump of the sector
we just loaded from the disk.  The code to call it was commented out, and
it easily fit into the extra sector, but remove it anyway as it is
unneeded.
2000-07-17 19:39:50 +00:00
Jonathan Lemon
cd914f8fa0 Unbreak the build -- no manual page for this yet. 2000-07-17 19:03:58 +00:00
Jonathan Lemon
15602c8dd8 Hook up liloldr 2000-07-17 17:06:27 +00:00
Jonathan Lemon
9ebf93dc6d This is `liloboot', which creates a file which can be treated like a
Linux kernel image, and is designed to be dropped into a Linux system
and booted via LILO.  Once booted, the user is greeted by the FreeBSD
loader.  This still isn't quite complete, as the the root= specification
from LILO isn't currently passed to the loader yet.
2000-07-17 17:06:04 +00:00
John Baldwin
1dce5cb37f The new and improved boot0, v1.1. This version adds the following:
- Autodetection and support of the BIOS EDD extensions to work around the
  1024 cylinder limit on all but really ancient BIOS's.
- To work around some BIOS's which break when EDD is used with older drives,
  we only attempt to use EDD if the cylinder is > 1023.
- Since this new code required more space than we had left, expand boot0 to
  2 sectors (1024 bytes) in length.
- Add support for boot0 being multiple sectors using predefined constants.
  If boot0 needs to be extended in the future, all that is required is
  bumping the NUM_SECTORS constant.
- Now that we have more room to work with, add a few more fs type
  descriptions while making others more verbose.
2000-07-12 18:11:54 +00:00
John Baldwin
18601b5712 Remove commented out NOMAN variable. 2000-07-07 20:37:11 +00:00
John Baldwin
8dfe6fb59c - Inline all the functions that are only called once. This results in a
savings of 68 bytes in boot2.
- Also add a comment warning that you can't remove the empty exit()
  function.
2000-07-06 01:51:27 +00:00
John Baldwin
54ff3ae038 Doh. The disklabel is not 0x200 bytes of zeros, but it is 0x200 bytes long. 2000-07-06 00:29:40 +00:00
John Baldwin
a6bef20793 Clarify the comments in here a bit. The first sector of boot2 is not just
zeros, it is actually the disklabel itself.  boot2.ldr is simply a
placeholder in the boot2 binary.
2000-07-06 00:22:50 +00:00
John Baldwin
bd61ce880f Emulate the WBINVD instruction when it is called by the BIOS. 2000-07-06 00:13:21 +00:00
John Baldwin
0b74850760 Change the fault message to say 'BTX halted' isntead of 'System halted' to
avoid confusion.

Submitted by:	George Scott <George.Scott@its.monash.edu.au>
2000-06-29 08:24:50 +00:00
John Baldwin
52f5035190 Rework the detecting of the rdmsr and wrmsr instructions in the v86
monitor so that the codepath is cleaner and easier to maintain in the
future.
2000-06-29 01:25:31 +00:00
John Baldwin
bce816b9cc - Don't blindly assume that there are 8 hard drives installed. Instead,
use the BIOS Equipment List to determine how many hard drives are
  installed and if the drive number we received in %dl is valid.
- Don't bother to disable interrupts when setting up the stack.  The 8086
  and beyond implicitly disable interrupts after an instruction that sets
  %ss (for example, a pop or a mov) so that you can safely set %ss and %sp
  in two consecutive instructions.  An exception to this is the lss
  instruction, which can set both registers simultaneously and thus doesn't
  need this hack.
- Add support for EDD BIOS extensions to support booting off of hard drives
  of nearly arbitrary length.
2000-06-27 20:04:10 +00:00
John Baldwin
2960c255b4 Comment this. 2000-06-26 23:58:04 +00:00
John Baldwin
cbf3fb883e Add in support for EDD to support large disks via LBA. This uses a
method similar to that of the loader to avoid potentially breaking older
drives in that we only use EDD if the desired cylinder is > 1023.
2000-06-26 22:57:16 +00:00
John Baldwin
35bdac5bbd Comment this bad boy. Hopefully the next person that comes along won't
have to spend a few hours reading the code to figure all this out.
2000-06-19 22:50:46 +00:00