SIGCHLD to our parent process. Otherwise, we could block while obtaining
the process lock for our parent process and switch out while we were
in SSTOP. Even worse, when we try to resume from the mutex being blocked
on our p_stat will be SRUN, not SSTOP.
- Fix a comment above stop() to indicate that it requires that the proc lock
be held, not a proctree lock.
Reported by: markm
Sleuthing by: jake
Giant. The only exception is the CANSIGNAL() macro. Unlocking the proc
lock around sendsig() in trapsignal() is also questionable. Note that
the functions sigexit(), psignal(), and issignal() must be called with
the proc lock of the process in question held. postsig() and
trapsignal() should not be called with the proc lock held, but they
also do not require Giant anymore either.
- Remove spl's that are now no longer needed as they are fully replaced.
is sent to a process, psignal() needs to schedule an AST for the
process if the process is runnable, not just if it is current, so that
pending signals get checked for on the next return of the process to
user mode. This wasn't practical until recently because the AST flag
was per-cpu so setting it for a non-current process would usually just
cause a bogus AST for the current process.
For non-current processes looping in user mode, it took accidental
(?) magic to deliver signals at all. Signals were usually delivered
late as a side effect of rescheduling (need_resched() sets astpending,
etc.). In pre-SMPng, delivery was delayed by at most 1 quantum (the
need_resched() call in roundrobin() is certain to occur within 1
quantum for looping processes). In -current, things are complicated
by normal interrupt handlers being threads. Missing handling of the
complications makes roundrobin() a bogus no-op, but preemptive
scheduling sort of works anyway due to even larger bogons elsewhere.
- All processes go into the same array of queues, with different
scheduling classes using different portions of the array. This
allows user processes to have their priorities propogated up into
interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
32. We used to have 4 separate arrays of 32 queues each, so this
may not be optimal. The new run queue code was written with this
in mind; changing the number of run queues only requires changing
constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter. This
is intended to be used to create per-cpu run queues. Implement
wrappers for compatibility with the old interface which pass in
the global run queue structure.
- Group the priority level, user priority, native priority (before
propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
This was used to detect when a process' priority had lowered and
it should yield. We now effectively yield on every interrupt.
- Activate propogate_priority(). It should now have the desired
effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
idle loop. It interfered with propogate_priority() because
the idle process needed to do a non-blocking acquire of Giant
and then other processes would try to propogate their priority
onto it. The idle process should not do anything except idle.
vm_page_zero_idle() will return in the form of an idle priority
kernel thread which is woken up at apprioriate times by the vm
system.
- Update struct kinfo_proc to the new priority interface. Deliberately
change its size by adjusting the spare fields. It remained the same
size, but the layout has changed, so userland processes that use it
would parse the data incorrectly. The size constraint should really
be changed to an arbitrary version number. Also add a debug.sizeof
sysctl node for struct kinfo_proc.
attributes. This is needed for AST's to be properly posted in a preemptive
kernel. They are backed by two new flags in p_sflag: PS_ASTPENDING and
PS_NEEDRESCHED. They are still accesssed by their old macros:
aston(), astoff(), etc. For completeness, an astpending() macro has been
added to check for a pending AST, and clear_resched() has been added to
clear need_resched().
- Rename syscall2() on the x86 back to syscall() to be consistent with
other architectures.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
out: label in psignal() did not grab sched_lock before trying to release
it. Also, the previous version had several cases where it grabbed
sched_lock before jumping to out: unneccessarily, so rework this a bit.
The runfast: and out: labels must be called with sched_lock released, and
the run: label must be called with it held. Appropriate mtx_assert()'s
have been added that should catch any bugs that may still be in this
code.
Noticed by: bde
of explicit calls to lockmgr. Also provides macros for the flags
pased to specify shared, exclusive or release which map to the
lockmgr flags. This is so that the use of lockmgr can be easily
replaced with optimized reader-writer locks.
- Add some locking that I missed the first time.
process is on the alternate stack or not. For compatibility
with sigstack(2) state is being updated if such is needed.
We now determine whether the process is on the alternate
stack by looking at its stack pointer. This allows a process
to siglongjmp from a signal handler on the alternate stack
to the place of the sigsetjmp on the normal stack. When
maintaining state, this would have invalidated the state
information and causing a subsequent signal to be delivered
on the normal stack instead of the alternate stack.
PR: 22286
may block on a mutex while on the sleep queue without corrupting
it.
- Move dropping of Giant to after the acquire of sched_lock.
Tested by: John Hay <jhay@icomtek.csir.co.za>
jhb
acquire Giant as needed in functions that call mi_switch(). The releases
need to be done outside of the sched_lock to avoid potential deadlocks
from trying to acquire Giant while interrupts are disabled.
Submitted by: witness
syscall compare against a variable sv_minsigstksz in struct
sysentvec as to properly take the size of the machine- and
ABI dependent struct sigframe into account.
The SVR4 and iBCS2 modules continue to have a minsigstksz of
8192 to preserve behavior. The real values (if different) are
not known at this time. Other ABI modules use the real
values.
The native MINSIGSTKSZ is now defined as follows:
Arch MINSIGSTKSZ
---- -----------
alpha 4096
i386 2048
ia64 12288
Reviewed by: mjacob
Suggested by: bde
the 128-bit sigset_t changes by moving conditionally (rarely) executed
code to the beginning where it is always executed, and since this code
now involves 3 128-bit operations, the pessimization was relatively
large. This change speeds up lmbench's pipe latency benchmark by
3.5%.
Fixed style bugs in CURSIG().
very bloated, first with 128-bit sigset_t's, then with locking in the
SMP case, then with locking in all cases. The space bloat was probably
also time bloat, partly because the fast path through CURSIG() was
pessimized by the sigset_t changes. This change speeds up lmbench's
pipe-based latency benchmark by 4% on a Celeron. <sys/signalvar.h>
had become very polluted to support the bloat.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
defined. This boils down to conditionally compile the
old signal syscalls.
We might want to extend the types in syscalls.master to
make these syscalls conditionally on something more
appropriate than COMPAT_43.
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.
Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
after the acquisition of any advisory locks. This fix corrects a case
in which a process tries to open a file with a non-blocking exclusive
lock. Even if it fails to get the lock it would still truncate the
file even though its open failed. With this change, the truncation
is done only after the lock is successfully acquired.
Obtained from: BSD/OS
syscall path inward. A system call may select whether it needs the MP
lock or not (the default being that it does need it).
A great deal of conditional SMP code for various deadended experiments
has been removed. 'cil' and 'cml' have been removed entirely, and the
locking around the cpl has been removed. The conditional
separately-locked fast-interrupt code has been removed, meaning that
interrupts must hold the CPL now (but they pretty much had to anyway).
Another reason for doing this is that the original separate-lock for
interrupts just doesn't apply to the interrupt thread mechanism being
contemplated.
Modifications to the cpl may now ONLY occur while holding the MP
lock. For example, if an otherwise MP safe syscall needs to mess with
the cpl, it must hold the MP lock for the duration and must (as usual)
save/restore the cpl in a nested fashion.
This is precursor work for the real meat coming later: avoiding having
to hold the MP lock for common syscalls and I/O's and interrupt threads.
It is expected that the spl mechanisms and new interrupt threading
mechanisms will be able to run in tandem, allowing a slow piecemeal
transition to occur.
This patch should result in a moderate performance improvement due to
the considerable amount of code that has been removed from the critical
path, especially the simplification of the spl*() calls. The real
performance gains will come later.
Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.
Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.
Replace procfs.h:CHECKIO() macros with calls to p_trespass().
Only show command lines to process which can trespass on the target
process.
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
structures for list operations. This patch makes all list operations
in sys/kern use the queue(3) macros, rather than directly accessing the
*Q_{HEAD,ENTRY} structures.
This batch of changes compile to the same object files.
Reviewed by: phk
Submitted by: Jake Burkholder <jake@checker.org>
PR: 14914
can provide the correct context to each signal handler.
Fix broken sigsuspend(): don't use p_oldsigmask as a flag, use SAS_OLDMASK
as we did before the linuxthreads support merge (submitted by bde).
Move ps_sigstk from to p_sigacts to the main proc structure since signal
stack should not be shared among threads.
Move SAS_OLDMASK and SAS_ALTSTACK flags from sigacts::ps_flags to proc::p_flag.
Move PS_NOCLDSTOP and PS_NOCLDWAIT flags from proc::p_flag to procsig::ps_flag.
Reviewed by: marcel, jdp, bde
-----------------------------
The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.
The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.
struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.
signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.
Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.
NOTE: kdump (and port linux_kdump) must be recompiled.
Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.
