Commit Graph

31 Commits

Author SHA1 Message Date
Poul-Henning Kamp
41ee9f1c69 Add some missing <sys/module.h> includes which are masked by the
one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
Marius Strobl
50aa106108 Remove double __FBSDID and move the remaining one into a common place after
the license(s) and before the driver comment (the latter only in drivers not
having __FBSDID at that location).
2004-05-29 18:09:10 +00:00
Andre Oppermann
9a54cbb95d Correct the phy_service() routine case MII_TICK to correctly track
the falling edge of a media state change.

This is in preparation for media state change notification to the
routing socket.

No objections by:	sam, wpaul, ru, bms
Brucification by:	bde
2004-05-03 13:01:34 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Paul Saab
786a9b65a9 Typo when setting wirespeed. || != |
Found by:	jake
2003-09-28 04:16:16 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
38d8c9940b Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:42:59 +00:00
Doug Ambrisko
6d2a9bd669 On Dell boxes such as the PE2650 we need to disable 3 led mode for the
link LED to work.

Reviewed by:	wpaul
Obtained from:	Linux driver
2003-08-20 04:06:00 +00:00
Bill Paul
5d99c6417d Add support for the Broadcom BCM5901 and BCM5901 rev A2 chips.
These are 10/100 only NICs found on the IBM Thinkpad R40E and
G40. These seem to be based on the BCM5705 MAC but with a PHY
that doesn't support 1000Mbps modes.

Submitted by:	Igor Sviridov <sia@nest.org>
2003-08-12 05:18:51 +00:00
Bill Paul
0434d1b8d2 Add support for the BCM5705 and its ilk. Changes:
- 5705 doesn't support jumbo frames
- Statistics must be read from registers
- RX return ring must be capped at 512 entries
- Omit initialization of certain device blocks
- Acknowledge link change interrupts by setting the 'link changed'
  bit in the status register (used to have no effect)
- Remember to toggle the MI completion bit too
- Set the mbuf low watermark differently (on-chip memory buffers,
  not BSD mbufs)
- Don't enable Ethernet@WireSpeed feature for certain 5705 chip revs
- Add additional PCI IDs for 5705 and 5782 parts
- Add a forgotten 5704 PCI ID

Most changes ripped kicking and screaming from the Broadcom linux driver.
Thanks to Paul Saab for sanity testing. (My lack of sanity has been
confirmed.)
2003-07-16 00:09:56 +00:00
Paul Saab
20430a6b04 Something I missed in my tree.
If the media changes, poke the DSP on the 5401/5411 Broadcom PHY's.

Obtained from:	NetBSD
2003-05-04 02:03:20 +00:00
Paul Saab
37ceeb4d9f - Move bge_phy_hack into the phy code and implement the various DSP
patch workarounds for each phy revision.
  Obtained from: NetBSD & Broadcom Linux driver

- Disable AUTOPOLL when accessing the PHY as it may cause PCI errors.
  Obtained from: NetBSD

- Check the UPDATED bit in the status block so the driver knows
  that the status block as indeed changed since the last access.
  Broadcom documentation states drivers should unset the UPDATED/CHANGED
  bits after reading them.

- When changing media types, first loop the phy then set the media.
  Broadcom documentation and Linux drivers do this and I observed
  much better handling of link after this change.

- Broadcom documentation states that for 1000BaseT operation,
  autonegotiation must be enabled.  Fix hard coding of media so that
  the driver only advertises 1000BaseT as the supported media type
  and enable autonegotition.

- Only set Master/Slave on the 5701.
  Obtained from Broadcom Linux driver.
2003-05-03 19:06:50 +00:00
Paul Saab
6ac6d2c895 Add untested support for the Broadcom 5704.
Obtained from:	NetBSD
2003-05-02 19:53:40 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
David E. O'Brien
2d3ce7133a Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
2003-01-19 02:59:34 +00:00
Semen Ustimenko
07971c4102 Remove unnecessary <sys/malloc.h> include.
Submitted by:	marius@alchemy.franken.de
MFC after:	1 week
2002-10-29 00:20:47 +00:00
Alfred Perlstein
9c1c2e9924 Put function return types on a line by themselves.
Cleanup my earlier de-__P sweep and remove whitespace between function
names and paramters.
2002-10-14 22:31:52 +00:00
John Polstra
b1265c1a98 Add support for the BCM5703x chips. I do not have one of these
cards to test; however the submitter reports that this patch works
with the on-board interface on the IBM x235 server.

Submitted by:	Jung-uk Kim <jkim@niksun.com>
MFC after:	1 month
2002-09-08 19:12:02 +00:00
Poul-Henning Kamp
fd94424c78 Clean up mii/phy drivers: Remove the MIIF_DOINGAUTO which doesn't really
do anything at the end of the day except bloat the drivers which has
copy&pasted it.
2002-05-04 11:00:30 +00:00
Poul-Henning Kamp
279fe8d156 Make one generic mii_phy_detach() to replace 19 slightly different ones.
Rename mii_phy_auto_stop() mii_phy_down().

Introduce mii_down(), use it from nge.  Do not indirect it to 19 identical
case's in 19 switchstatements like NetBSD did.
2002-04-29 13:07:38 +00:00
Poul-Henning Kamp
b418ad5c2e Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/ 2002-04-28 20:34:20 +00:00
Poul-Henning Kamp
07dd938303 Don't pass three args when one will do just fine, and even prevent
mistakes like the one brgphy.c (now corrected).
2002-04-28 19:25:07 +00:00
Poul-Henning Kamp
83549c664b Improve an API by about 4 lines per driver. 2002-04-28 19:01:32 +00:00
Bill Paul
15f962ed42 Teach the brgphy driver about the BCM5701's internal copper PHY. 2002-03-22 06:38:52 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Jonathan Lemon
d9730b8b53 Cleanup pass for mii drivers.
. Make internal service routines static.
   . Use a consistent ordering of checks in MII_TICK.  Do the work in the
     mii_phy_tick() subroutine if appropriate.
   . Call mii_phy_update() to trigger the callbacks.
2001-09-29 19:18:52 +00:00
Bill Paul
1d083681bc Tweak the autoneg kickoff code to that it more closely resembles the
method uses in the nsgphy driver.
2001-09-18 00:31:19 +00:00
Bill Paul
e1968a0d2f Add support for the BCM5401 and BCM5411 10/100/1000Mbps copper gigE PHYs.
This basically updates the brgphy driver to support 10/100 modes in
addition to 1000Mbps modes.
2001-09-04 22:00:33 +00:00
Bill Paul
34da0ef197 Grrrrr. That last commit was supposed to be to the head, not to -stable
(even though I want the fixes in -stable anyway). I'm sure I'm going
to get flamed now for committing to -stable and -current too quickly.
*sigh*
2000-12-12 19:31:14 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Bill Paul
c0d7d4d45b Add PHY drivers for the XMAC II's internal PHY and the Broadcom BCM5400
1000baseTX PHY. These will be used by the SysKonnect gigabit ethernet
driver shortly.
2000-04-22 01:58:18 +00:00