Commit Graph

1451 Commits

Author SHA1 Message Date
Maxime Henrion
141bacb048 Change the operation parameter of bus_dmamap_sync() from an
enum to an int and redefine the BUS_DMASYNC_* constants as
flags.  This allows us to specify several operations in one
call to bus_dmamap_sync() as in NetBSD.
2003-04-10 23:03:33 +00:00
Jake Burkholder
ac00210525 Remove invalid cast to vm_offset_t to avoid truncating a physical address
when doing pmap_kextract on a 2MB page.

Spotted by:	peter
Sponsored by:	DARPA, Network Associates Laboratories
2003-04-08 18:22:41 +00:00
Jake Burkholder
46ea68dd10 Better fix for previous previous which still allows the 4megs of kva at
the top of the address space to be reclaimed.  The problem is that with
the APTD gone the mapable kernel address space runs right to the end of
the 32 bit address space.  As a max this is 0x100000000, which can't be
represented in 32 bits, so we have to use ptd entry n-1 and pte offset
n-1, instead of ptd entry n and pte offset 0.  There's still 1 page we
can't use, but we gain just under 4 megs of kva (8 megs with PAE).

Sponsored by:	DARPA, Network Associates Laboratories
2003-04-07 14:27:19 +00:00
Dag-Erling Smørgrav
9f45b2da8f Define ovbcopy() as a macro which expands to the equivalent bcopy() call,
to take care of the KAME IPv6 code which needs ovbcopy() because NetBSD's
bcopy() doesn't handle overlap like ours.

Remove all implementations of ovbcopy().

Previously, bzero was a function pointer on i386, to save a jmp to
bzero_vector.  Get rid of this microoptimization as it only confuses
things, adds machine-dependent code to an MD header, and doesn't really
save all that much.

This commit does not add my pagezero() / pagecopy() code.
2003-04-04 17:29:55 +00:00
Poul-Henning Kamp
197e5e73ef Libdisk does not need to include <sys/diskslice.h> any more.
Move the remaining bits of <sys/diskslice.h> to <i386/include/bootinfo.h>

Move i386/pc98 specific bits from <sys/reboot.h> to
<i386/include/bootinfo.h> as well.

Adjust includes in sys/boot accordingly.
2003-04-04 16:35:16 +00:00
Jake Burkholder
d1d03c2b72 Bandaid fix for previous commit while I figure out why it broke. This
caused crashes early in boot on i386 UP machines.

Reported by:	phk
Pointy hat to:	jake
2003-04-04 10:09:44 +00:00
Jake Burkholder
163529c2b3 - Removed APTD and associated macros, it is no longer used.
BANG BANG BANG etc.

Sponsored by:	DARPA, Network Associates Laboratories
2003-04-03 23:44:35 +00:00
Peter Wemm
cc66ebe2a9 Commit a partial lazy thread switch mechanism for i386. it isn't as lazy
as it could be and can do with some more cleanup.  Currently its under
options LAZY_SWITCH.  What this does is avoid %cr3 reloads for short
context switches that do not involve another user process.  ie: we can
take an interrupt, switch to a kthread and return to the user without
explicitly flushing the tlb.  However, this isn't as exciting as it could
be, the interrupt overhead is still high and too much blocks on Giant
still.  There are some debug sysctls, for stats and for an on/off switch.

The main problem with doing this has been "what if the process that you're
running on exits while we're borrowing its address space?" - in this case
we use an IPI to give it a kick when we're about to reclaim the pmap.

Its not compiled in unless you add the LAZY_SWITCH option.  I want to fix a
few more things and get some more feedback before turning it on by default.

This is NOT a replacement for Bosko's lazy interrupt stuff.  This was more
meant for the kthread case, while his was for interrupts.  Mine helps a
little for interrupts, but his helps a lot more.

The stats are enabled with options SWTCH_OPTIM_STATS - this has been a
pseudo-option for years, I just added a bunch of stuff to it.

One non-trivial change was to select a new thread before calling
cpu_switch() in the first place.  This allows us to catch the silly
case of doing a cpu_switch() to the current process.  This happens
uncomfortably often.  This simplifies a bit of the asm code in cpu_switch
(no longer have to call choosethread() in the middle).  This has been
implemented on i386 and (thanks to jake) sparc64.  The others will come
soon.  This is actually seperate to the lazy switch stuff.

Glanced at by:  jake, jhb
2003-04-02 23:53:30 +00:00
Poul-Henning Kamp
09bf42f50f Don't include <sys/buf.h> needlessly. 2003-04-01 09:02:58 +00:00
Jake Burkholder
7ab9b220d9 - Add support for PAE and more than 4 gigs of ram on x86, dependent on the
kernel opition 'options PAE'.  This will only work with device drivers which
  either use busdma, or are able to handle 64 bit physical addresses.

Thanks to Lanny Baron from FreeBSD Systems for the loan of a test machine
with 6 gigs of ram.

Sponsored by:	DARPA, Network Associates Laboratories, FreeBSD Systems
2003-03-30 05:24:52 +00:00
Jake Burkholder
de54353fb8 - Remove invalid casts.
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-30 01:44:16 +00:00
Jake Burkholder
aea57872f0 - Convert all uses of pmap_pte and get_ptbase to pmap_pte_quick. When
accessing an alternate address space this causes 1 page table page at
  a time to be mapped in, rather than using the recursive mapping technique
  to map in an entire alternate address space.  The recursive mapping
  technique changes large portions of the address space and requires global
  tlb flushes, which seem to cause problems when PAE is enabled.  This will
  also allow IPIs to be avoided when mapping in new page table pages using
  the same technique as is used for pmap_copy_page and pmap_zero_page.

Sponsored by:	DARPA, Network Associates Laboratories
2003-03-30 01:16:19 +00:00
Paul Saab
87437b0b89 Nuke options HTT infavor of machdep.hlt_logical_cpus tunable/sysctl.
This keeps the logical cpu's halted in the idle loop.  By default
the logical cpu's are halted at startup.  It is also possible to
halt any cpu in the idle loop now using machdep.hlt_cpus.

Examples of how to use this:
machdep.hlt_cpus=1	halt cpu0
machdep.hlt_cpus=2	halt cpu1
machdep.hlt_cpus=4	halt cpu2
machdep.hlt_cpus=3	halt cpu0,cpu1

Reviewed by:	jhb, peter
2003-03-26 19:49:34 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Matthew N. Dodd
1352a54255 Use __packed; 2003-03-24 20:44:39 +00:00
John Baldwin
a480c73063 Expand the APIC ID mask field of the ICR register to 8 bits intead of just
4 bits.  This reportedly fixes booting on the SW7500CW2.  Much thanks to
the submitter for tracking this down!

Submitted by:	Brian Buchanan <brian@ncircle.com>
Reviewed by:	peter
MFC after:	3 days
2003-03-17 19:14:13 +00:00
Jake Burkholder
5501d40bb9 Made the prototypes for pmap_kenter and pmap_kremove MD. These functions
are machine dependent because they are not required to update the tlb when
mappings are added or removed, and doing so is machine dependent.
In addition, an implementation may require that pages mapped with pmap_kenter
have a backing vm_page_t, which is not necessarily true of all physical
pages, and so may choose to pass the vm_page_t to pmap_kenter instead of the
physical address in order to make this requirement clear.
2003-03-16 04:16:03 +00:00
Jake Burkholder
2089c5c95e Use bus_space_handle_t to represent host port and virtual addresses;
bus_addr_t may not be appropriate.

Sponsored by:	DARPA, Network Associates Laboratories
2003-03-11 19:43:38 +00:00
John Baldwin
d7a715dc64 Wrap the hyperthreading support code with the HTT kernel option.
Hyperthreading support is now off unless the HTT option is added.

MFC-after:	3 days
2003-03-04 20:24:53 +00:00
Alan Cox
8480cd45a5 Remove some long unused declarations. (For example, the PV flags have not
been used since revision 1.8, roughly nine years ago.)
2003-02-27 20:13:20 +00:00
Maxime Henrion
f6c912dd0c Correctly set BUS_SPACE_MAXSIZE in all the busdma backends.
It was bogusly set to 64 * 1024 or 128 * 1024 because it was
bogusly reused in the BUS_DMAMAP_NSEGS definition.
2003-02-26 02:16:06 +00:00
Jake Burkholder
0f1a7e05a2 - Added inlines pmap_is_current, pmap_is_alternate and pmap_set_alternate
for testing and setting the current and alternate address spaces.
- Changed PTDpde and APTDpde to arrays to support multiple page directory
  pages.

ponsored by:	DARPA, Network Associates Laboratories
2003-02-25 19:40:21 +00:00
Jake Burkholder
5cd612b27e - Removed UMAXPTDI and UMAXPTEOFF.
- Changed VM_MAXUSER_ADDRESS to be defined in terms of PTDPTDI.  In order for
  assumptions about the recursive page table map to work it must be the base
  of the recursive map.  Any pte offset that's not NPTEPG will break these
  assumptions.

Sponsored by:	DARPA, Network Associates Laboratories
2003-02-24 20:29:52 +00:00
Yoshihiro Takahashi
2302407b21 The mpbiosreason variable does not used for pc98. 2003-02-24 14:36:03 +00:00
Tor Egge
07d2563244 Allow machines with one CPU and a valid mp table to boot an SMP kernel. 2003-02-23 23:49:57 +00:00
Jake Burkholder
ef49a94104 Previous commit missed a 1 that should be NGPTD, and an NPDEPG that should
be NPDEPTD.  Grumble.

Sponsored by:	DARPA, Network Associates Laboratories
2003-02-23 22:12:08 +00:00
Jake Burkholder
910548dea7 - Added macros NPGPTD, NBPTD, and NPDEPTD, for dealing with the size of the
page directory.
- Use these instead of the magic constants 1 or PAGE_SIZE where appropriate.
  There are still numerous assumptions that the page directory is exactly
  1 page.

Sponsored by:	DARPA, Network Associates Laboratories
2003-02-23 21:20:00 +00:00
Jake Burkholder
e29632c9e1 - Added macros PDESHIFT and PTESHIFT, use these instead of magic constants
in locore.
- Removed the macros PTESIZE and PDESIZE, use sizeof instead in C.

Sponsored by:	DARPA, Network Associates Laboratories
2003-02-23 09:45:50 +00:00
Alan Cox
01a06ce250 The root of the splay tree maintained within the pm_pteobj always refers
to the last accessed pte page.  Thus, the pm_ptphint is redundant and can
be removed.
2003-02-22 23:43:08 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Peter Wemm
af3d516f55 Initiate de-orbit burn for USE_PCI_BIOS_FOR_READ_WRITE. This has been
#if'ed out for a while.  Complete the deed and tidy up some other bits.

We need to be able to call this stuff from outer edges of interrupt
handlers for devices that have the ISR bits in pci config space.  Making
the bios code mpsafe was just too hairy.  We had also stubbed it out some
time ago due to there simply being too much brokenness in too many systems.
This adds a leaf lock so that it is safe to use pci_read_config() and
pci_write_config() from interrupt handlers.  We still will use pcibios
to do interrupt routing if there is no acpi.. [yes, I tested this]

Briefly glanced at by:  imp
2003-02-18 03:36:49 +00:00
Poul-Henning Kamp
f341ca9891 Remove #include <sys/dkstat.h> 2003-02-16 14:13:23 +00:00
Mike Barcroft
8cf5ed5125 Implement fpclassify():
o Add a MD header private to libc called _fpmath.h; this header
  contains bitfield layouts of MD floating-point types.
o Add a MI header private to libc called fpmath.h; this header
  contains bitfield layouts of MI floating-point types.
o Add private libc variables to lib/libc/$arch/gen/infinity.c for
  storing NaN values.
o Add __double_t and __float_t to <machine/_types.h>, and provide
  double_t and float_t typedefs in <math.h>.
o Add some C99 manifest constants (FP_ILOGB0, FP_ILOGBNAN, HUGE_VALF,
  HUGE_VALL, INFINITY, NAN, and return values for fpclassify()) to
  <math.h> and others (FLT_EVAL_METHOD, DECIMAL_DIG) to <float.h> via
  <machine/float.h>.
o Add C99 macro fpclassify() which calls __fpclassify{d,f,l}() based
  on the size of its argument.  __fpclassifyl() is never called on
  alpha because (sizeof(long double) == sizeof(double)), which is good
  since __fpclassifyl() can't deal with such a small `long double'.

This was developed by David Schultz and myself with input from bde and
fenner.

PR:		23103
Submitted by:	David Schultz <dschultz@uclink.Berkeley.EDU>
		(significant portions)
Reviewed by:	bde, fenner (earlier versions)
2003-02-08 20:37:55 +00:00
Poul-Henning Kamp
d1b40f007d i386/i386/tsc.c was repo-copied from i386/isa/clock.c.
Remove all the stuff that does not relate to the TSC.

Change the calibration to use DELAY(1000000) rather than trying to check
it against the CMOS RTC, this drastically increases precision:

Using 25 samples on a Athlon 700MHz UP machine I find:

                stddev          min          max        average
CMOS             22200 Hz    -74980 Hz     34301 Hz   704928721 Hz
DELAY             1805 Hz     -1984 Hz      2678 Hz   704937583 Hz

(The difference between the two averages is not statistically significant.)

expressed in PPM of the frequency:
                stddev          min          max
CMOS             31.49 PPM  -106.37 PPM    48.66 PPM
DELAY             2.56 PPM     2.81 PPM     3.80 PPM

This code will not be used until a followup commit to sys/isa/clock.c
and sys/pc98/pc98/clock.c which will only happen after some field testing.
2003-02-05 09:20:40 +00:00
Poul-Henning Kamp
553ebddc59 Make get_cyclecount() use binuptime() when no tsc is available: it is cheaper. 2003-02-05 08:55:10 +00:00
Jake Burkholder
238dd3209a Split statclock into statclock and profclock, and made the method for driving
statclock based on profhz when profiling is enabled MD, since most platforms
don't use this anyway.  This removes the need for statclock_process, whose
only purpose was to subdivide profhz, and gets the profiling clock running
outside of sched_lock on platforms that implement suswintr.
Also changed the interface for starting and stopping the profiling clock to
do just that, instead of changing the rate of statclock, since they can now
be separate.

Reviewed by:	jhb, tmm
Tested on:	i386, sparc64
2003-02-03 17:53:15 +00:00
Julian Elischer
6f8132a867 Reversion of commit by Davidxu plus fixes since applied.
I'm not convinced there is anything major wrong with the patch but
them's the rules..

I am using my "David's mentor" hat to revert this as he's
offline for a while.
2003-02-01 12:17:09 +00:00
Poul-Henning Kamp
3c99c0bc50 Make tsc_freq a 64bit quantity.
Inspired by:    http://www.theinquirer.net/?article=7481
2003-01-29 11:36:39 +00:00
Scott Long
5193a34646 Implement bus_dmamem_alloc_size() and bus_dmamem_free_size() as
counterparts to bus_dmamem_alloc() and bus_dmamem_free().  This allows
the caller to specify the size of the allocation instead of it defaulting
to the max_size field of the busdma tag.

This is intended to aid in converting drivers to busdma.  Lots of
hardware cannot understand scatter/gather lists, which forces the
driver to copy the i/o buffers to a single contiguous region
before sending it to the hardware.  Without these new methods, this
would require a new busdma tag for each operation, or a complex
internal allocator/cache for each driver.

Allocations greater than PAGE_SIZE are rounded up to the next
PAGE_SIZE by contigmalloc(), so this is not suitable for multiple
static allocations that would be better served by a single
fixed-length subdivided allocation.

Reviewed by:	jake (sparc64)
2003-01-29 07:25:27 +00:00
Jake Burkholder
aff81a81d6 Remove BDE_DEBUGGER.
Discussed with:	bde
2003-01-28 19:05:44 +00:00
Julian Elischer
a18b6f65d0 Fix KSE related patch.
Make it compile for the SMP case..
statclock_process() has changed prototypes.
2003-01-26 21:32:08 +00:00
Peter Wemm
99ebb0bfba Clean up some junk defines, and GC the TPR options. 2003-01-23 01:04:27 +00:00
Peter Wemm
904639d710 Nuke CHEAP_TPR stuff, including LOPRIO_LEVEL (bogus) and ALLHWI_LEVEL
(which we never used).  There is no need to tweak the TPR anymore and
only causes problems.
2003-01-23 01:03:34 +00:00
John Baldwin
10deca7e68 - Move enable_sse()'s prototype to machine/md_var.h.
- Sort definition of cpu_* variables appropriately.
- Move cpu_fxsr out of the magic non-BSS set of variables and stick it in
  the BSS along with hw_instruction_sse (make the latter static as well).

Submitted by:	bde (partially)
2003-01-22 18:18:45 +00:00
John Baldwin
caf3197636 Rename cpuid_cpuinfo to cpu_procinfo. bde requested that I rename this
variable to something in the cpu_* namespace since that's what all the
other cpuid variables were named and cpu_procinfo is what I came up with.

Requested by:	bde
2003-01-22 17:54:12 +00:00
John Baldwin
f4e27c448b Bah, add in a missing space char I noticed when MFC'ing this. 2003-01-22 17:26:18 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Marcel Moolenaar
9d683ffd4b o Move the contents of <machine/floatingpoint.h> over to
<machine/ieeefp.h> where it belongs.
o  Remove the i386 specific inclusion of <machine/floatingpoint.h>
   from <ieeefp.h>, now that including <machine/ieeefp.h> is enough
   for all architectures.
o  Allow <machine/ieeefp.h> to inline the functions exposed by the
   headers by checking for _IEEEFP_INLINED_ in the MI header. When
   defined, prototypes are not given and it is assumed that the MD
   headers, when inlining only a subset of the functions provide
   prototypes for the functions not being inlined.

Based on patch from: Terry Lambert <tlambert2@mindspring.com>
Tested with: make release.
2003-01-19 06:01:33 +00:00
Matthew N. Dodd
7534ac7ab7 A driver for the System Management Application Program
Interface (SMAPI) BIOS, which is present on some IBM
Thinkpad models (560, 600, 770 to name a few.)

The SMAPI BIOS provides access to System Information,
System Configuration, and Power Management.
2003-01-17 08:10:18 +00:00
John Baldwin
f85b149dae Rework part of the previous processor name changes so that we read
cpu_exthigh and cpu_brand in printcpuinfo() instead of in identify_cpu().
We also only do it for known-good values of cpu_vendor which is a bit more
conservative.

Reviewed by:	bde (mostly)
2003-01-09 19:54:49 +00:00