consistent with pmc_destroy_owner_descriptor(). Also be sure to destroy
PMCs if a process exits or execs without explicitly releasing them.
Reviewed by: bz, gnn
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D958
Previously, if no drivers attached at boot we would panic with
"vtbuf_fill_locked begin.tp_row 0 must be < screen height 0".
PR: 192248
Reviewed by: ray
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D954
used to align partitions in gpart. We also try to align partitions by
stripe size when creating new media. Align these two concepts by
making fwsectors the same as the stripe size. Select a sensible number
of heads so we wind up with about 20 cylinders. This number was
selected to keep the rounding effects to a few percent while keeping
the number of cylinder groups low.
Sadly, it is not possible to make these numbers match the numbers used
by SD card readers. There apperas to be much variation between brands
so there's no one universal number. These numbers are also not aligned
to the stripe size, so some performance problems may still be present
when SD cards are created this way.
Also, these numbers will differ from the far less common SD to ATA
adapters, which present a different, but more uniform, set of numbers
that also happened to match the old defaults.
Nothing should change for current users. Any suboptimal performance
caused by misalignment will still be there. gpart will honor the
partitions that aren't on proper boudnaries, but editing the partition
tables may result in different alignments being used than before when
editing things natively.
Ideally, there'd be some way to override these values in the disk
subsystem by the user for the USB adapter use case where all "native"
notions of geometry disappear. This does not implement that.
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
For compatibility, 'device windtunnel' is still supported, but one should use
'device adm1030' instead, and this has been updated in GENERIC and NOTES.
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
He noticed issues setting this bit in SRRCTL after the queue was up,
so doing it from the sysctl handler isn't enough and may not actually
work correctly.
This commit doesn't remove the sysctl path or try to change its
behaviour. I'll talk with others about how to finish fixing that
before I tackle that.
PR: kern/194311
Submitted by: luigi
MFC after: 3 days
Sponsored by: Norse Corp, Inc
This is a duplicate variable reference in mrsas, so now this patch isolate atomic_ variable and relavent
function call using prefix mrsas_xx.
Issue was introduced in r272737.
MFC after: 2 weeks
Sponsored by: Avago Technology
There's a very remote, but possible, chance that the integer part read will
fail, but the fraction read succeeds, at which point the reported temperature is
invalid.
Reported by: Matthew Rezny
MFC after: 3 weeks
- Add a mutex to protect the softc.
- Use callout(9) instead of timeout(9).
- Consolidate duplicated detach routines into a bus-independent detach
routine.
- Add an extra sleep lock flag (MSESC_READING) to prevent other readers
from reading while the first reader is copying data out of sc_bytes[]
via uiomove().
- Use bus_*() instead of bus_space_*().
Tested by: nyan
- Read the counts of received, dropped, and transmitted management
packets and add sysctl nodes for them.
- Fix the total octets received/transmitted to read all 64 bits of
the counters.
- Add missing sysctl nodes for rlec, tncrs, fcruc, tor, and tot.
- Remove spurious spaces.
Reviewed by: Eric Joyner @ Intel
MFC after: 1 week
It allows to push out some final data from the send queue to the socket
before its close. In particular, it increases chances for logout response
to be delivered to the initiator.
* Add a bus_if.m method - get_domain() - returning the VM domain or
ENOENT if the device isn't in a VM domain;
* Add bus methods to print out the domain of the device if appropriate;
* Add code in srat.c to save the PXM -> VM domain mapping that's done and
expose a function to translate VM domain -> PXM;
* Add ACPI and ACPI PCI methods to check if the bus has a _PXM attribute
and if so map it to the VM domain;
* (.. yes, this works recursively.)
* Have the pci bus glue print out the device VM domain if present.
Note: this is just the plumbing to start enumerating information -
it doesn't at all modify behaviour.
Differential Revision: D906
Reviewed by: jhb
Sponsored by: Norse Corp
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
where as there are limited number(32) of mfi commands in the pool.
The mfi command pool is now restricted to 27 simultaneous accesses by using
a counting semaphore while calling the passthru function.
In the mrsas_cam.c source file there was a same function name mrsas_poll(),
which was same as the mrsas_poll() implemented in the mrsas.c file for the
polling interface.
To clearly distinguish the functionality by usage we have renamed the former
as mrsas_cam_poll().
In the passthru function let's say it has got an mfi command from the pool
but it has failed in one of the DMA function call which will lead to leak
an mfi command because in the ERROR case it directly returns and not freeing up
the occupied mfi command.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
It is meant to notify the applications which will be waiting for some
controller events to be occured.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
This Driver will create multiple MSI-x vector depending upon what FW expose.
As of now 12 Gbp/s MR controller (Invader and Fury) expose 96 msix vector.
As of now 6 Gbp/s MR controller (Thunderbolt) expose 16 msix vector.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
snv add, so I have added $FreeBSD$ as comment.
This commit is contininous of last mrsas commit, so that compilation
does not break.
Obtained from: AVAGO Technologies
MFC after: 2 weeks
machine, for which 32bit compatibilty code has been added.
As in linux there is only one device entry that is used to fire IOCTL commands,
a new device entry megaraid_sas_ioctl_node is added for solely this
purpose.
From one dev node i.e mrgaraid_sa_ioctl_node we have to find out the
controller instance in case of multicontroller, for which one management info
structure has been added.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
E.g: If the user wants to create more than 64VD on a controller,
it is not possible on current firmware/driver.
New feature and requirement to support upto 256VD, firmware/driver/apps need changes.
In addition to that, there must be a backward compatibility of the new driver with the
older firmware and vice versa.
RAID map is the interface between Driver and FW to fetch all required
fields(attributes) for each Virtual Drives.
In the earlier design driver was using the FW copy of RAID map where as
in the new design the Driver will keep the RAID map copy of its own; on which
it will operate for any raid map access in fast path.
Local driver raid map copy will provide ease of access through out the code
and provide generic interface for future FW raid map changes.
For the backward compatibility driver will notify FW that it supports 256VD
to the FW in driver capability field.
Based on the controller properly returned by the FW, the Driver will know
whether it supports 256VD or not and will copy the RAID map accordingly.
At any given time, driver will always have old or new Raid map.
Reviewed by : ambrisko
MFC after : 2 weeks
Sponsored by: AVAGO Technologies
These controllers seem to have the same feature of AR813x/AR815x and
improved RSS support(4 TX queues and 8 RX queues). alc(4) supports
all hardware features except RSS. I didn't implement RX checksum
offloading for AR816x/AR817x just because I couldn't get
confirmation from the Vendor whether AR816x/AR817x corrected its
predecessor's RX checksum offloading bug on fragmented packets.
This change adds supports for the following controllers.
o AR8161 PCIe Gigabit Ethernet controller
o AR8162 PCIe Fast Ethernet controller
o AR8171 PCIe Gigabit Ethernet controller
o AR8172 PCIe Fast Ethernet controller
o Killer E2200 Gigabit Ethernet controller
Tested by: Many
Relnotes: yes
MFC after: 2 weeks
HW donated by: Qualcomm Atheros Communications, Inc.
cannot be sent to the chip because a prerequisite L2 resolution
failed.
Submitted by: Hariprasad at chelsio dot com (original version)
MFC after: 2 weeks.
E5372 with different product IDs.
Interestingly, the standard E5372 IDs (12d1:1506) are currently listed in
u3g.c and are the same as the E3131. However, the R215/E5372 is an NCM
device and works well with cdce(4) whereas the E3131 isn't. More work
may be needed to better identify the other device IDs.
MFC after: 1 week
events we have actually counted 'Branch Instruction Retired' when people
asked for 'Unhalted core cycles' using the 'unhalted-core-cycles' event mask
mnemonic.
Reviewed by: jimharris
Discussed with: gnn, rwatson
MFC after: 3 days
Sponsored by: DARPA/AFRL
It was found that VirtualBox' AHCI does not allow nterrupt to be cleared
before the interrupt status register is read, causing interrupt storm.
AHCI specification allows to skip this register use when multi-vector MSI
is enabled and so interrupting port is known. For single-vector MSI that
is not stated explicitly, but if the port is only one, it is obviously
known too.
When the screen size is unknown, it's set to 0x0. We can't use that as
the buffer size, otherwise, functions such as vtbuf_fill() will fail.
This fixes a panic on RaspberryPi, where there's no vt(4) backend
configured early in boot.
PR: 193981
Tested by: danilo@
MFC after: 3 days
ports. The current bitmap array was too small to hold more than 16
bits and would at some point toggle the context size, which then would
trigger an enumeration fault and cause a fallback to the EHCI
companion controller, if any.
MFC after: 3 days
Add new functions to manipulate these mode & state, instead of calling
kbdd_ioctl() everyhere.
This fixes at least two bugs:
1. The state of the Scroll Lock LED and the state of scroll mode
could be out-of-sync. For instance, if one enables scroll mode on
window #1 and switches to window #2, the LED would remain on, but
the window wouldn't be in scroll mode.
Similarily, when switching between a console and an X.Org
session, the LED states could be inconsistent with the real
state.
2. When exiting from an X.Org session, the user could be unable to
type anything. The workaround was to switch to another console
window and come back.
Differential Revision: https://reviews.freebsd.org/D821
Reviewed by: ray@
Approved by: ray@
Tested by: kwm@
MFC after: 3 days
Also increase default for Tx queue get-list limit.
Too small limit results in TCP packets drops especiall when many
streams are running simultaneously.
Put list may be kept small enough since it is just a temporary
location if transmit function can't get Tx queue lock.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Required size of event queue is calculated now.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Remove trailing whitespaces and tabs.
Enclose value in return statements in parentheses.
Use tabs after #define.
Do not skip comparison with 0/NULL in boolean expressions.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Fix a problem where the blockback driver could run out of requests,
despite the fact that we allocate enough request and reqlist
structures to satisfy the maximum possible number of requests.
The problem was that we were sending responses back to the other
end (blockfront) before freeing resources. The Citrix Windows
driver is pretty agressive about queueing, and would queue more I/O
to us immediately after we sent responses to it. We would run into
a resource shortage and stall out I/O until we freed resources.
It isn't clear whether the request shortage condition was an
indirect cause of the I/O hangs we've been seeing between Windows
with the Citrix PV drivers and FreeBSD's blockback, but the above
problem is certainly a bug.
Sponsored by: Spectra Logic
Submitted by: ken
Reviewed by: royger
dev/xen/blkback/blkback.c:
- Break xbb_send_response() into two sub-functions,
xbb_queue_response() and xbb_push_responses().
Remove xbb_send_response(), because it is no longer
used.
- Adjust xbb_complete_reqlist() so that it calls the
two new functions, and holds the mutex around both
calls. The mutex insures that another context
can't come along and push responses before we've
freed our resources.
- Change xbb_release_reqlist() so that it requires
the mutex to be held instead of acquiring the mutex
itself. Both callers could easily hold the mutex
while calling it, and one really needs to hold the
mutex during the call.
- Add two new counters, accessible via sysctl
variables. The first one counts the number of
I/Os that are queued and waiting to be pushed
(reqs_queued_for_completion). The second one
(reqs_completed_with_error) counts the number of
requests we've completed with an error status.
Using realmem on PVH is not realiable, since in this case the realmem value
is computed from Maxmem, which contains the higher memory address found. Use
HYPERVISOR_start_info->nr_pages instead, which is set by the hypervisor and
contains the exact number of memory pages assigned to the domain.
Sponsored by: Citrix Systems R&D
This device is used by the user-space daemon that runs xenstore
(xenstored). It allows xenstored to map the xenstore memory page, and
reports the event channel xenstore is using.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstored_dev.c:
- Add the xenstored character device that's used to map the xenstore
memory into user-space, and to report the event channel used by
xenstore.
conf/files:
- Add the device to the build process.
Convert the xenstore user-space device (/dev/xen/xenstore) to a device
using the newbus interface. This allows us to make the device
initialization dependant on the initialization of xenstore itself in
the kernel.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Convert to a newbus device, this removes the xs_dev_init function.
xen/xenstore/xenstore_internal.h:
- Remove xs_dev_init prototype.
dev/xen/xenstore/xenstore.c:
- Don't call xs_dev_init anymore, the device will attach itself when
xenstore is started.
The xenstore related devices in the kernel cannot be started until
xenstored is running, which will happen later in the Dom0 case. If
start_info_t doesn't contain a valid xenstore event channel, defer all
xenstore related devices attachment to later.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Prevent xenstore from trying to attach it's descendant devices if
xenstore is not initialized.
- Add a callback in the xenstore interrupt filter that will trigger
the plug of xenstore descendant devices on the first received
interrupt. This interrupt is generated when xenstored attaches to
the event channel, and serves as a notification that xenstored is
running.
Move xenstore related devices (xenstore.c and xenstore_dev.c) from
xen/xenstore to dev/xen/xenstore. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
This is done so we can prevent the Xen Balloon driver from attaching
before xenstore is setup.
Sponsored by: Citrix Systems R&D
dev/xen/balloon/balloon.c:
- Make xen balloon a driver that depends on xenstore.
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.
Sponsored by: Citrix Systems R&D
xen/interface/physdev.h:
- Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
public interface.
x86/include/init.h:
- Add a hook for setting custom msi_init methods.
amd64/amd64/machdep.c:
i386/i386/machdep.c:
- Set the default msi_init hook to point to the native MSI
initialization method.
x86/xen/pv.c:
- Set the Xen MSI init hook when running as a Xen guest.
x86/x86/local_apic.c:
- Call the msi_init hook instead of directly calling msi_init.
xen/xen_intr.h:
x86/xen/xen_intr.c:
- Introduce support for registering/releasing MSI interrupts with
Xen.
- The MSI interrupts will use the same PIC as the IO APIC interrupts.
xen/xen_msi.h:
x86/xen/xen_msi.c:
- Introduce a Xen MSI implementation.
x86/xen/xen_nexus.c:
- Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
implementation.
x86/xen/xen_pci.c:
- Introduce a Xen specific PCI bus that inherits from the ACPI PCI
bus and overwrites the native MSI methods.
- This is needed because when running under Xen the MSI messages used
to configure MSI interrupts on PCI devices are written by Xen
itself.
dev/acpica/acpi_pci.c:
- Lower the quality of the ACPI PCI bus so the newly introduced Xen
PCI bus can take over when needed.
conf/files.i386:
conf/files.amd64:
- Add the newly created files to the build process.
This switches code to using xpt_scan() routine, irrelevant to locking.
Using xpt_action() directly requires knowledge about higher level locks,
that SIM does not need to have.
This code is obsoleted, but that is not a reason to crash.
MFC after: 3 days
These variants have a few differences from the default AR9485 NIC,
namely:
* a non-default antenna switch config;
* slightly different RX gain table setup;
* an external XLNA hooked up to a GPIO pin;
* (and not yet done) RSSI threshold differences when
doing slow diversity.
To make this possible:
* Add the PCI device list from Linux ath9k, complete with vendor and
sub-vendor IDs for various things to be enabled;
* .. and until FreeBSD learns about a PCI device list like this,
write a search function inspired by the USB device enumeration code;
* add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this
to initialise its local driver parameters upon attach;
* copy these parameters over in the AR9300 HAL;
* don't default to override the antenna switch - only do it for
the chips that require it;
* I brought over ar9300_attenuation_apply() from ath9k which is cleaner
and easier to read for this particular NIC.
This is a work in progress. I'm worried that there's some post-AR9380
NIC out there which doesn't work without the antenna override set as
I currently haven't implemented bluetooth coexistence for the AR9380
and later HAL. But I'd rather have this code in the tree and fix it
up before 11.0-RELEASE happens versus having a set of newer NICs
in laptops be effectively RX deaf.
Tested:
* AR9380 (STA)
* AR9485 CUS198 (STA)
Obtained from: Qualcomm Atheros, Linux ath9k
In some code that is shared between the ixl(4) and ixlv(4) drivers,
a macro hard-coded a register offset that was not valid on ixlv devices.
Fix this by having each driver define a variable that contains the correct
offset.
Reviewed by: Eric Joyner <ricera10 AT gmail.com>
MFC after: 3 days
Sponsored by: Sandvine Inc
Previously it was possible for issues e.g. use after free, to result
from processing the done queue while not holding the channel lock.
While this should never happen in practice, unexpected code flows
which result in two threads processing from the same queue may
be possible.
We now use a local STAILQ to prevent this ever being an issue.
Sponsored by: Multiplay
Do not pass wrong alignment value to fwdma_malloc_multiseg and ultimately
to contigalloc. In addition to being wrong, this causes insta-panic in
certain cases due to safety assertion - the alignment is required to be
the power of two and the value we calculate here seldom is.
MFC after: 1 month
Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying this is as a
local patch is not longer a viable option.
MFC after: 1 month
available before any uppper layer driver (TOE, iWARP, or iSCSI)
registers with the base cxgbe(4) driver.
Submitted by: Hariprasad at chelsio dot com
Reviewed by: np@
- Do not set if_collisions on interrupt, read them in ti_get_counter().
- Add missing bus_dmamap_sync(BUS_DMASYNC_PREREAD) in ti_ioctl2(). [1]
Submitted by: mav [1]
- Use bus_*() instead of bus_space_*().
- Use device_printf().
- Remove unused global variables and the extra warning suppression
they required.
- Use callout() instead of timeout().
Reviewed by: se
node's interrupts=<...> property creating resource list entries with a
single common implementation. This change makes ofw_bus_intr_to_rl() the
one true copy of that code and removes the copies of it from other places.
This also adds handling of the interrupts-extended property, which allows
specifying multiple interrupts for a node where each interrupt can have a
separate interrupt-parent. The bindings for this state that the property
cells contain an xref phandle to the interrupt parent followed by whatever
interrupt info that parent normally expects. This leads to having a
variable number of icells per interrupt in the property. For example you
could have <&intc1 1 &intc2 26 9 0 &intc3 9 4>.
Differential Revision: https://reviews.freebsd.org/D803
but taken from hardware.
- Mechanically convert to if_inc_counter() the rest of counters.
- While here fix 3 instances of the same bug, when error counter was ++
in one place and then assigned in other place, losing the increment.
Achieve that storing soft errors counters in softc.
that the driver is not going to be ever improved in terms of hardware
support, it is going to be only maintained as our kernel APIs change.
Carrying all the compatibility with ancient versions of NetBSD, OpenBSD,
Linux and BSDI, as well as obsoleted FreeBSD versions has no reason.
addresses. (The chip doesn't really care, it's just that it needs to be
told explicitly if unicast DMACs are checked for "hits" in the hash that
is used after the TCAM entries are all used up).
Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.
Reviewers: jhb
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D590
1. changed the code so that 2**16 keys are supported
2. changed the number of possible fans in a system from 2 to 6
3. added write support for some fan sysctls
4. added a new sysctl which shows the ID of the fan
5. added four more apple models with their temperature keys
6. changed the maxnumber of temperature keys from 36 to 80
7. replaced several fixed buf sizes to sizeof buf
Obtained from: Denis Ahrens denis at h3q.com
MFC after: 4 weeks
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
Reviewed by: adrian, rmacklem
Sponsored by: Mellanox Technologies
MFC after: 1 week
The original code was .. well, slightly more than incorrect.
It showed up as stalled RX queues if the NIC needed to be frequently
reinitialised (eg during scans.)
This is inspired by work done by Matt Dillon over at the DragonflyBSD
project.
So:
* track when EDMA RX has been stopped and when the MAC has been reset;
* re-initialise the ring only after a reset;
* track whether RX has been stopped/started - just for debugging now;
* don't bother with the RX EOL stuff for EDMA - we don't need the
interrupt at all. We also don't need to disable/enable the interrupt
or start DMA - once new frames are pushed into the ring via the
normal RX path, it'll just restart RX DMA on its own.
Tested:
* AR9380, STA mode
* AR9380, AP mode
* AR9485, STA mode
* AR9462, STA mode
It's now possible to scroll up the 500 hard-coded lines of history, not
just a fraction of them. For instance, one can reach the top of the boot
process.
Sometimes, when scrolling or when changing the screen size (by changing
the font or loading a KMS driver for instance), one could see the
history cycling (old content appeared below latest lines). This is
fixed.
Now, when the resolution changes are more lines can be shown, the
displayed area is adjusted so that, if the screen was filled with
content before, it's filled with content after as well: more history
is visible, instead of having blank lines below the previously visible
content.
MFC after: 3 days
struct ifnet if_oqdrops.
Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Rather than #define-ing common code function calls to OS-dependent
ones, make the osdep versions match the common code expectations,
adjust the FreeBSD specific code to use those, and remove the
#defines.
In the FreeBSD specific code, use "i40e_mem_reserved" for the
now expected but unused argument to i40e_allocate_dma_mem().
Reviewed by: gnn, eric.joyner intel.com
MFC after: 3 days
- Do not accumulate statistics on every tick.
- Accumulate statistics in vtnet_setup_stat_sysctl()
and in vtnet_get_counter().
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
double-free mbufs.
Like ixgbe(4) chipsets, EOP is only set on the final descriptor
in a chain of descriptors. So, to free the whole list of descriptors,
we should free the current slot _and_ the assembled list of descriptors
that make up the fragment list.
The existing code was setting discard once it saw EOP + an error status;
it then freed all the subsequent descriptors until the next EOP. That's
totally the wrong order.
- Do not ever set a counter to a value. For those counters
that we don't increment, but return directly from hardware
create cases in if_get_counter() method.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
with mbufs normally called *m in one place), rename the function
arguments to "mem".
This is a non-functional change.
Reviewed by: gnn, eric.joyner intel.com
MFC after: 3 days
In the current implementation, the isp_kthread() threads never exit.
The target threads do have an exit mode from isp_attach(), but it is
not invoked from isp_detach().
Ensure isp_detach() notifies threads started for each channel, such
that they exit before their parent device softc detaches, and thus
before the module does. Otherwise, a page fault panic occurs later in:
sysctl_kern_proc
sysctl_out_proc
kern_proc_out
fill_kinfo_proc
fill_kinfo_thread
strlcpy(kp->ki_wmesg, td->td_wmesg, sizeof(kp->ki_wmesg));
For isp_kthread() (and isp(4) target threads), td->td_wmesg references
now-unmapped memory after the module has been unloaded. These threads
are typically msleep()ing at the time of unload, but they could also
attempt to execute now-unmapped code segments.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1070921 on 2014/06/22 13:01:17
This feature is required by Mesa 9.2+. Without this, a GL application
crashes with the following message:
# glxinfo
name of display: :0.0
Gen6+ requires Kernel 3.6 or later.
Assertion failed: (ctx->Version > 0), function handle_first_current,
file ../../src/mesa/main/context.c, line 1498.
Abort (core dumped)
Now, Mesa 10.2.4 and 10.3-rc3 works fine:
# glxinfo
name of display: :0
display: :0 screen: 0
direct rendering: Yes
...
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 10.2.4
...
The code was imported from Linux 3.8.13.
Reviewed by: kib@
Tested by: kwm@, danfe@, Henry Hu,
Lundberg, Johannes <johannes@brilliantservice.co.jp>,
Johannes Dieterich <dieterich.joh@gmail.com>,
Lutz Bichler <lutz.bichler@gmail.com>,
MFC after: 3 days
Relnotes: yes
in r263741. At least with CTL (slightly modified to report SPC2) there
is still some problem: it doesn't seem to find LUNs higher than 7.
Sponsored by: The FreeBSD Foundation
commit 8bd88585ed
Rework atse_rx_cycles handling: count packets instead of fills, and use the
limit only when polling, not when in interrupt mode. Otherwise, we may
stop reading the FIFO midpacket and clear the event mask even though the
FIFO still has data to read, which could stall receive when a large packet
arrives. Add a comment about races in the Altera FIFO interface: we may
need to do a little more work to handle races than we are.
commit 20b39086cc
Use 'sizeof(data)' rather than '4' when checking an mbuf bound, as is the
case for adjusting length/etc.
commit e18953174a
Break out atse_intr() into two separate routines, one for each of the two
interrupt sources: receive and transmit.
commit 6deedb4324
For the RX interrupt, take interest only in ALMOSTEMPTY and OVERFLOW.
For the TX interrupt, take interest only in ALMOSTFULL and UNDERFLOW.
Perform TX atse_start_locked() once rather than twice in TX interrupt
handling -- and only if !FULL, rather than unconditionally.
commit 12601972ba
Experimentation suggests that the Altera Triple-Speed Ethernet documentation
is incorrect and bits in the event and interrupt-enable registers are not
irrationally rearranged relative to the status register.
commit 3cff2ffad7
Substantially rework interrupt handling in the atse(4) driver:
- Introduce a new macro ATSE_TX_PENDING() which checks whether there is
any pending data to transmit, either in an in-progress packet or in
the TX queue.
- Introduce new ATSE_RX_STATUS_READ() and ATSE_TX_STAUTS_WRITE() macros
that query the FIFO status registers rather than event registers,
offering level- rather than edge-triggered FIFO conditions.
- For RX, interrupt only on full/overflow/underflow; for TX, interrupt
only on empty/overflow/underflow.
- Add new ATSE_RX_INTR_READ() and ATSE_RX_INTR_WRITE() macros useful for
debugging interrupt behaviour.
- Add a debug.atse_intr_debug_enable sysctl that causes various pieces
of FIFO state to be printed out on each RX or TX interrupt. This is
disabled by default but good to turn on if the interface appears to
wedge. Also print debugging information when polling.
- In the watchdog handler, do receive, not just transmit, processing, to
ensure that the rx, not just tx, queue is being handled -- and, in
particular, will be drained such that interrupts can resume.
- Rework both atse_rx_intr() and atse_tx_intr() to eliminate many race
conditions, and add comments on why various things are in various
orders. Interactions between modifications to the event and interrupt
masks are quite subtle indeed, and we must actively check for a number
of races (e.g., event mask cleared; packet arrives; interrupts enabled).
We also now use the status registers rather than event registers for
FIFO status checks to avoid other races; we continue to use event
registers for underflow/overflow.
With this change, interrupt-driven operation of atse appears (for the
time being) robust.
commit 3393bbff5c
atse: Fix build after 3cff2ffa
Obtained from: cheribsd
Submitted by: rwatson, emaste
Sponsored by: DARPA/AFRL
MFC after: 3 days
fmp->buf at the free point is already part of the chain being freed,
so double-freeing is counter-productive.
Submitted by: Marc De La Gueronniere <mdelagueronniere@verisign.com>
MFC after: 1 week
Sponsored by: Verisign, Inc.
This allows the NIC to drop frames on the receive queue and not
cause the MAC to block on receiving to _any_ queue.
Tested:
igb0@pci0:5:0:0: class=0x020000 card=0x152115d9 chip=0x15218086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'I350 Gigabit Network Connection'
class = network
subclass = ethernet
Discussed with: Eric Joyner <eric.joyner@intel.com>
MFC after: 1 week
Sponsored by: Norse Corp, Inc.
spaces, rather than a split address, we actually can't check for being within
the kernel's address range. Instead, do what other backtraces do, and use
trapexit()/asttrapexit() as the stack sentinel.
MFC after: 3 weeks
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
MFC after: 1 week
Sponsored by: Mellanox Technologies
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
Huawei. It might appear as if the firmware is allocating memory blocks
according to the USB transfer size and if there is initially a lot of
data, like at the answering machine prompt, it simply dies without any
apparent reason. The simple workaround for this is to force a zero
length packet at hardware level after every 512 bytes of data. This
will force the other side to use smaller memory blocks aswell.
MFC after: 1 week
an mbuf's storage (internal or external).
Add a new M_SIZE() mbuf macro that returns the size of an mbuf's
storage (internal or external).
These contrast with m_data and m_len, which are with respect to data
in the buffer, rather than the buffer itself.
Rewrite M_LEADINGSPACE() and M_TRAILINGSPACE() in terms of M_START()
and M_SIZE().
This is done as we currently have many instances of using mbuf flags
to generate pointers or lengths for internal storage in header and
regular mbufs, as well as to external storage. Rather than replicate
this logic throughout the network stack, centralising the
implementation will make it easier for us to refine mbuf storage.
This should also help reduce bugs by limiting the amount of
mbuf-type-specific pointer arithmetic. Followup changes will
propagate use of the macros throughout the stack.
M_SIZE() conflicts with one macro in the Chelsio driver; rename that
macro in a slightly unsatisfying way to eliminate the collision.
MFC after: 3 days
Obtained from: jeff (with enhancements)
Sponsored by: EMC / Isilon Storage Division
Reviewed by: bz, glebius, np
Differential Revision: https://reviews.freebsd.org/D753
reboot/halt/debug.
o Add support for most key combinations supported by syscons(4).
Reviewed by: dumbbell, emaste (prev revision of D747)
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
device drivers with calls to the centralised m_print() implementation.
While the formatting and output details differ a little, the content
is essentially the same, and it is unlikely anyone has used this
debugging output in some time.
This change reduces awareness of mbuf cluster allocation (and,
especially, the M_EXT flag) outside of the mbuf allocator, which will
make it easier to refine the external storage mechanism without
disrupting drivers in the future.
Style bugs are preserved.
Reviewed by: bz, glebius
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
The nmdm code enforces a number between the 'nmdm' and 'A|B' portions
of the device name. This is then used as a unit number, and sprintf'd
back into the tty name. If leading zeros were used in the name,
the created device name is different than the string used for the
clone-open (e.g. /dev/nmdm0001A will result in /dev/nmdm1A).
Since unit numbers are no longer required with the updated tty
code, there seems to be no reason to force the string to be a
number. The fix is to allow an arbitrary string between
'nmdm' and 'A|B', within the constraints of devfs names. This allows
all existing user of numeric strings to continue to work, and also
allows more meaningful names to be used, such as bhyve VM names.
Tested on amd64, i386 and ppc64.
Reported by: Dave Smith
PR: 192281
Reviewed by: neel, glebius
Phabric: D729
MFC after: 3 days
This fixes a bug where scroll lock would not work for tty #0 when using
vt_vga's textmode. The reason was that this window is created with a
static 256x100 buffer, larger than the real size of 80x25.
Now, in vt_change_font() and vt_compute_drawable_area(), we still
perform operations even of the window has no font loaded (this is the
case in textmode here vw->vw_font == NULL). One of these operation
resizes the buffer accordingly.
In vt_compute_drawable_area(), we take the terminal size as is (ie.
80x25) for the drawable area.
The font argument to vt_set_border() is removed (it was never used) and
the code now uses the computed drawable area instead of re-doing its own
calculation.
Reported by: Harald Schmalzbauer <h.schmalzbauer_omnilan.de>
Tested by: Harald Schmalzbauer <h.schmalzbauer_omnilan.de>
MFC after: 3 days
The rules turn out to be:
* for non-aggregation session TX queues - it's either sent or not sent.
* for aggregation session TX queues - if nframes=1, then the status reflects
the completed transmission.
* however, for nframes > 1, then this is just a status reflecting what
the initial transmission did. The compressed BA (immediate or delayed)
may not have yet been received, so the actual frame status is in the
compressed BA updates.
Whilst here, I fiddled with debugging and formatting a bit.
There's also RTS attempts (what the atheros chips call "short retries")
which weren't being logged and they aren't yet being used in the rate
control statistics updates. For now, at least log them.
TODO:
* This still isn't 100% correct! So I have to tinker with this some more.
(The failures aren't always failures..)
* Extend the rate control API in net80211 so it can take both short and
long retry counts.
Tested:
* Intel 5100, STA mode
The (eventual) intention is to create MIB counters for transmitted
frame completion to count how many packets with each status are
transmitted.
Note the difference between A-MPDU and non A-MPDU status.
Obtained from: Linux iwlwifi/dvm driver
For controllers with only one port (like PCIe or M.2 SSDs) interrupt can
come from only one source, and skipping read saves few percents of CPU time.
MFC after: 1 month
H/W donated by: I/O Switch
an entry in the xref list if one doesn't already exist for the given handle.
On a system that uses phandle properties, the init-time scan of the tree
which builds the xref list will pre-create entries for every xref handle
that exists in the data. On systems where the xref and node handles are
synonymous there is no phandle property in referenced nodes, and the xref
list will initialize to an empty state. In the latter case, we still need
to be able to associate a device_t with an xref handle, so we create list
entries on the fly as needed. Since the node and xref handles are
synonymous, we have all the info needed to create a list entry at device
registration time.
The downside to this change is that it basically allows on the fly creation
of xref handles as synonyms of node handles, and the association of a
device_t with them. Whether this is a bug or a feature is in the eye of
the beholder, I guess.
resume that is a superset of a pcb. Move the FPU state out of the pcb and
into this new structure. As part of this, move the FPU resume code on
amd64 into a C function. This allows resumectx() to still operate only on
a pcb and more closely mirrors the i386 code.
Reviewed by: kib (earlier version)
for the node. The default routine returns the untranslated handle, which
is sometimes useful, but sometimes you really need to know there's no
entry in the xref<->node<->device translation table.
I gave up to update list of Marvell chips that require this quirk.
The final nail was growing number of PCIe/M.2 SSDs where Marvell chips
have PCI IDs of different vendors.
MFC after: 1 week
H/W donated by: I/O Switch
