The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
If all of the mirror's children have the same rotation rate, report
that. But if they have mixed rotation rates, or if any child has an
unknown rotation rate, report "Unknown".
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D39458
All I/O requests through the taste consumers are synchronous, done
with g_read_data() and without any locks held. It makes no sense
to delegate the I/O to g_down/g_up threads.
This removes many of context switches during disk retaste.
MFC after: 2 weeks
I observed a situation where some read requests failed when a 2-way geom
mirror lost one disk. The problem appears to be in the logic that skips
retrying a failed request when a mirror has only one active disk.
Generally, that makes sense. But during a transition from two disks to
one it is possible that the request failed on the failing disk before it
was inactivated and, so, the remaining active disk is the disk that
should be tried.
This change adds an additional check to ensure that it was the (only)
active disk that was already tried.
Reviewed by: mav
MFC after: 3 weeks
The mirror metadata fields contain string buffers and pad bytes, neither
were being zeroed before metadata was written to disk. Also, the
metadata structure is smaller than the sector size, and in one case
gmirror was failing to zero-fill the full buffer before writing.
Fix these problems by pre-zeroing the metadata structure and the sector
buffer.
Reported by: KMSAN
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
Geom_mirror initialization occurs in spurts and the present of a
non-destroyed g_mirror softc does not always indicate that the geom has
launched (i.e., has an sc_provider).
Some gmirror(8) commands (via g_mirror_ctl) depend on a g_mirror's
sc_provider (insert and resize). For those commands, g_mirror_ctl is
modified to sleep-poll in an interruptible way until the target geom is
either launched or destroyed.
Reviewed by: markj
Tested by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24780
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
If g_mirror_taste encountered an error at g_mirror_add_disk, it might
try to g_mirror_destroy the device with the G_MIRROR_DEVICE_FLAG_TASTING
flag still set. This would wait on a worker to complete the destruction
with g_mirror_try_destroy, but that function bails out if the tasting
flag is set, resulting in a deadlock. Clear the tasting flag before
trying to destroy the device.
Test Plan:
sysctl debug.fail_point.mnowait="1%return"
kyua test -k /usr/tests/sys/geom/class/mirror/Kyuafile
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20744
When it comes to megabytes of text, difference between sbuf_printf() and
sbuf_cat() becomes substantial.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
gmirror's sc_flags is shared between some on-disk state and some runtime
only state. There's no real reason for that and they could probably be
split up. Until they are, locate all of the flags for the same field
nearby each other in the source, for clarity.
No functional change.
Sponsored by: Dell EMC Isilon
g_handleattr() fills out bp->bio_completed; otherwise, g_getattr()
returns an error in response to the query. This caused BIO_DELETE
support to not be propagated through stacked configurations, e.g.,
a gconcat of gmirror volumes would not handle BIO_DELETE even when
the gmirrors do. g_io_getattr() was not affected by the problem.
PR: 232676
Reported and tested by: noah.bergbauer@tum.de
MFC after: 1 week
I mistakenly added a lock assertion to this routine at the last minute
without confirming it was held during g_mirror_create. It isn't (it isn't
even initialized yet). Mea culpa. Access is exclusive in both callers,
just not always by that particular lock.
Reported by: lwhsu
X-MFC-With: r341840, r341674
r341674 inadvertently introduced a bug where newer mirror components being
tasted would clear the high sc_flags that are not controlled by component
metadata, such as G_MIRROR_DEVICE_FLAG_TASTING. This could plausibly expose
a small window of time during STARTING where device destruction might race
with mirror component addition, probably resulting in a crash.
Reviewed by: markj
X-MFC-With: r341674
Differential Revision: https://reviews.freebsd.org/D18521
Re-apply r341665 with format strings fixed.
If we happen to taste a stale mirror component first, don't reject valid,
newer components that have differing metadata from the stale component
(during STARTING). Instead, update our view of the most recent metadata as
we taste components.
Like mediasize beforehand, remove some checks from g_mirror_check_metadata
which would evict valid components due to metadata that can change over a
mirror's lifetime. g_mirror_check_metadata is invoked long before we check
genid/syncid and decide which component(s) are newest and whether or not we
have quorum.
Before checking if we can enter RUNNING (i.e., we have quorum) after a NEW
component is added, first remove any known stale or inconsistent disks from
the mirrorset, rather than removing them *after* deciding we have quorum.
Check if we have quorum after removing these components.
Additionally, add a knob, kern.geom.mirror.launch_mirror_before_timeout, to
force gmirrors to wait out the full timeout (kern.geom.mirror.timeout)
before transitioning from STARTING to RUNNING. This is a kludge to help
ensure all eligible, boot-time available mirror components are tasted before
RUNNING a gmirror.
Add a basic test case for STARTING -> RUNNING startup behavior around stale
genids.
PR: 232671, 232835
Submitted by: Cindy Yang <cyang AT isilon.com> (previous version)
Reviewed by: markj (kernel portions)
Discussed with: asomers, Cindy Yang
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18062
If we happen to taste a stale mirror component first, don't reject valid,
newer components that have differing metadata from the stale component
(during STARTING). Instead, update our view of the most recent metadata as
we taste components.
Like mediasize beforehand, remove some checks from g_mirror_check_metadata
which would evict valid components due to metadata that can change over a
mirror's lifetime. g_mirror_check_metadata is invoked long before we check
genid/syncid and decide which component(s) are newest and whether or not we
have quorum.
Before checking if we can enter RUNNING (i.e., we have quorum) after a NEW
component is added, first remove any known stale or inconsistent disks from
the mirrorset, rather than removing them *after* deciding we have quorum.
Check if we have quorum after removing these components.
Additionally, add a knob, kern.geom.mirror.launch_mirror_before_timeout, to
force gmirrors to wait out the full timeout (kern.geom.mirror.timeout)
before transitioning from STARTING to RUNNING. This is a kludge to help
ensure all eligible, boot-time available mirror components are tasted before
RUNNING a gmirror.
When we are instructed to forget mirror components, bump the generation id
to avoid confusion with such stale components later.
Add a basic test case for STARTING -> RUNNING startup behavior around stale
genids.
PR: 232671, 232835
Submitted by: Cindy Yang <cyang AT isilon.com> (previous version)
Reviewed by: markj (kernel portions)
Discussed with: asomers, Cindy Yang
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18062
Doing so introduces races which can lead to a use-after-free when
grabbing a snapshot of the GEOM mesh.
To ensure that a mirror's disk list remains stable, change its locking
protocol: both the softc lock and the topology lock are now required
to modify the list, so either lock is sufficient for traversal.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.
This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.
MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.
Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992
Since synchronization reads are performed by submitting a request to
the external mirror provider, we know that the request returns with an
error only when gmirror was unable to read a copy of the block from any
mirror. Thus, there is no need to retry the request from the
synchronization error handler.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
We would previously just free the request BIO, which would either cause
the disk to stay stuck in the SYNCHRONIZING state, or result in
synchronization completing without having copied the block which
returned an error.
With this change, if the disk which returned an error is the only active
disk in the mirror, the synchronizing disk is kicked out. Otherwise, the
read is retried.
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
g_mirror_regular_request() may free the gmirror consumer for a disk
if that disk is being disconnected, after which we must not dereference
the consumer pointer.
CID: 1384280
X-MFC with: r327496
- BIO_FLUSH requests were dispatched to the disks directly from
g_mirror_start() rather than going through the mirror's I/O request
queue, so they could have been reordered with preceding writes.
Address this by processing such requests from the queue, avoiding
direct dispatch.
- Handling for collisions with synchronization requests was too
fine-grained and could cause reordering of writes. In particular,
BIO_ORDERED was not being honoured. Address this by effectively
freezing the request queue any time a collision with a synchronization
request occurs. The queue is unfrozen once the collision with the
first frozen request is over.
- The above-mentioned collision handling allowed reads to jump ahead
of writes to the same offset. Address this by freezing all request
types when a collision occurs, not just BIO_WRITEs and BIO_DELETEs.
Also add some more fail points for use in testing error handling.
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13559
gmirror does not perform any sorting of I/O requests, so the bioq API
doesn't provide any advantages over plain TAILQs. The API also does not
provide operations needed by an upcoming change.
No functional change intended. The diff shrinks the geom_mirror.ko
text and the gmirror softc slightly.
Tested by: pho (part of a larger patch)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
g_mirror_event_send() acquires the I/O queue lock to deliver a wakeup
to the worker thread, and this is done after enqueuing the event.
So it's sufficient to check the event queue before atomically releasing
the queue lock and going to sleep.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Otherwise a gmirror that has received a BIO_DELETE request will never be
marked clean (unless sc_writes overflows).
MFC after: 1 week
Sponsored by: Dell EMC Isilon
We periodically record synchronization progress in the metadata
block of the disk being synchronized; this allows an interrupted
synchronization to be resumed. However, the frequency of these
updates heavily pessimized synchronization time on some media. This
change modifies gmirror to update metadata based on a time period,
and adds a sysctl to control that period. The default value results
in a much lower update frequency and increases the completion time
for an interrupted rebuild only marginally.
Reported by: Andre Albsmeier <andre@fbsd.e4m.org>
MFC after: 3 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
A negative value can be used to suppress all prints from the gmirror
kernel code, which can be useful when attempting to trigger race
conditions using stress tests.
MFC after: 1 week
g_mirror_destroy() is supposed to unlock the softc before indicating
success, but it wasn't doing so if the caller raced with another
thread destroying the mirror.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
In theory, all data access errors mean that a member is out of sync
at most. But they were treated as more serious errors to avoid the
situation where a flaky disk gets repeatedly disconnected, re-synchronized,
reconnected and then disconnected again.
ENXIO is a special error that means that the member disk disappeared,
so it should get the same handling as the GEOM orphaning event.
There is a better chance that when the disk is reconnected, it will be
a good member again.
When ENXIO happens on a read we use the exisiting G_MIRROR_BUMP_SYNCID
mechanism which means that the mirror's syncid is increased as soon
as there is a write to the mirror. That's because no data has got out
of sync yet, but the problematic memeber is disconnected, so the future
write will make it stale.
When ENXIO happens on a write we use a new G_MIRROR_BUMP_SYNCID_NOW
mechanism which means that we update the mirror metadata as soon as
possible because the problematic memeber is already behind.
Reviewed by: markj, imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9463