Commit Graph

1116 Commits

Author SHA1 Message Date
Bruce Evans
14b1ec3ac6 Don't include isa.c! How did it link?
Otherwise clean up the includes.  Don't include anything included by
param.h.  Do include systm.h and cons.h to avoid satisfy -Wimplicit.
Don't include console.h or use NOKEY because these are for syscons
and we use generic consoles.

Don't follow null pointer for command "ls -lrt" - don't allow extra
args but do allow trailing blanks.

Check for invalid device numbers.  strtol() failures are now checked
for in all cases, but not carefully enough.  We should check for
trailing junk, allow any base in all cases (just like config) and
handle signs better . (Use strtoul not strtol and cast by assignment
to the correct type - always an integral type, PARM_ADDR is bogus.
Hex numbers > 0x7fffffff can't be entered now.  0xffffffff has to
be entered as -1.)
1994-10-30 20:44:20 +00:00
Bruce Evans
ab4bc4b293 Fix selector arg to match the (missing) prototype for sdtossd().
Cosmetic.

Return from trap() if trap_fatal() returns.  trap_fatal() isn't
fatal if you have ddb.  Returning from trap() is usually the right
thing to do and much better than falling through.
1994-10-30 20:25:21 +00:00
Bruce Evans
6d520d66e4 Fix selector arg to match the (missing) prototype for ssdtosd().
Cosmetic.
1994-10-30 20:23:23 +00:00
Bruce Evans
54d024041c locore.s:
Build a dummy frame at the top of tmpstk to help debuggers trace the stack
when the system is idle.

swtch.s: idle():
Initialize the frame pointer so that debuggers don't try to trace a bogus
stack.

Load the frame pointer, load the stack pointer and switch out the old
stack in the unique order that never leaves one of the pointers pointers
invalid so that debuggers can trace idle().  Disabling interrupts
provides sufficient validity for normal operation, but debuggers use
(trace) traps.
1994-10-30 20:09:13 +00:00
Joerg Wunsch
5d04c702eb Several minor fixes to the floppy driver:
.	avoid resetting the FDC every time the last motor is going off;
	instead, give it a 60-second period for possible later reactivation.
	This prevents us from needing to recalibrate the FDC too often,
	but still allows for an ``automagic error recovery', just in case the
	controller is absolutely stuck. (Simply wait for 60 seconds, and
	try it again.)

.	made the floppy head settle time after a seek a constant
	that might be overridden by a config option. (Well, actually the
	divisor of the settle time). Pepople often reported problems with
	their floppies, so i need a simply mechanism that allows them
	to play with that value. (I personally cannot find any problem
	on *my* drives.)

.	implement the FD_DEBUG ioctl command, in case the driver
	is compiled with DEBUG turned on.

.	removed a bogus parameter from a printf; the remaining warnings
	from gcc -Wall seem to be warnings about the %b format gcc cannot
	understand

.	rearrange Garett's code to fit better in the existing structure
	of #define/type/function ordering.

.	make everything fit into 79 columns again.
1994-10-30 20:04:40 +00:00
Joerg Wunsch
c20c8046d5 Included the command definition for FD_DEBUG.
This way, it's possible for a user to activate/deactivate floppy driver
debugging, even if (s)he doesn't like the overhead of running DDB.
Since some ppl tend to have problems with their drives, this might be
valuable for investigations.
1994-10-30 19:17:39 +00:00
Andreas Schulz
339b10f15d Submitted by: Paul F. Werkowski
Add a quirk line for the SONY SDT-5000 like it is done for the WangDAT tapes.
1994-10-30 00:30:27 +00:00
Jordan K. Hubbard
904c1a11ac Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
Poul-Henning Kamp
67e9c49975 Add back a "is" variable which was removed by accident. 1994-10-29 10:19:32 +00:00
Poul-Henning Kamp
0f5a69189b A new Makefile, which is more our kind of makefile.
Based on Martins makefile, made by Rod, briefly tested by me
1994-10-28 22:13:22 +00:00
Poul-Henning Kamp
cacd1ee89f Add netboot to the world of make. 1994-10-28 22:11:50 +00:00
David Greenman
c232824e58 Fixed Jordan's editing mistake that caused this to puke. 1994-10-28 18:50:36 +00:00
Jordan K. Hubbard
100ba1a617 IP Firewall code from Daniel Boulet and J.S.Antsilevich
Submitted by:	danny ugen
1994-10-28 15:09:49 +00:00
Jordan K. Hubbard
94a92413cd From: fredriks@mcs.com (Lars Fredriksen)
...
It turns out that these files do not include <sys/dkbad.h> before
<sys/disklabel.h>.
Submitted by:	fredriks
1994-10-28 12:42:05 +00:00
Rodney W. Grimes
a5d34029d5 Removed extra slash between ${DESTDIR} and ${BINDIR}, noticed while working
on Makefile for netboot.
1994-10-28 07:54:13 +00:00
Poul-Henning Kamp
63f7a09266 Urg! the netboot/Makefile is in a miserable state. 1994-10-28 04:56:51 +00:00
Poul-Henning Kamp
1c6a0e235f This concludes the CVS-surgery. This makefile now just points at the subdir's. 1994-10-28 04:46:08 +00:00
Jordan K. Hubbard
a3eb9fc56a Note that enable and disable don't do anything, at present.
Make ^U/^X actually work.
1994-10-28 02:37:57 +00:00
Jordan K. Hubbard
54c7241bd3 Julian Elischer's disklabel fixes. 1994-10-27 20:45:13 +00:00
Stefan Eßer
c3739b59ec Change some compile time defaults, which may be overridden from the
kernel config file by options lines.
Now the default settings are FAST SCSI, max. 4 TAGS, WIDE transfers,
if supported by the hardware ...
1994-10-27 20:12:46 +00:00
Søren Schmidt
f809acea7c Added device registration stuff. 1994-10-27 08:03:15 +00:00
Poul-Henning Kamp
a95f669560 The other half of patch011, read Numlck state from bios. 1994-10-27 05:47:09 +00:00
Poul-Henning Kamp
c5bd56befa Extra intr's have nothing to do with LAPTOP.
Made five-strikes-we-shut-up for timeouts.
Inspired by:  bde in 1.1.5.1-patch011
1994-10-27 05:39:12 +00:00
Poul-Henning Kamp
b51250ff13 Made an annoying printf #ifdef SEADEBUG 1994-10-27 05:23:09 +00:00
Poul-Henning Kamp
e47655c507 Fix a bug which had crept in (an almost certain panic).
Remove inline assembler.
Avoid mbuf spaghetti by using m_devget.
1994-10-27 05:08:28 +00:00
Bruce Evans
f7bf7f894d Fix compiler warnings. 1994-10-26 22:01:11 +00:00
Bruce Evans
51c7f756fe Move definition and initialization of video_mode_pointer to syscons.c. 1994-10-26 21:52:25 +00:00
Bruce Evans
0d55b76505 Fix initialization of video_mode_ptr. It only worked if the segments
in the far pointers are multiples of 4K (as is normal when the video
BIOS is at seg 0xc000).  Disallow mode switching if the pointer is bad.

Use a new pa_to_va() macro for all BIOS and video addresses in syscons.
1994-10-26 21:51:22 +00:00
Garrett Wollman
d1a27c8dab Stylistic changes. 1994-10-26 21:10:13 +00:00
Jordan K. Hubbard
dc6e5623e1 Gross hack to make kernel names not starting with '/' start with '/'. 1994-10-26 20:46:05 +00:00
Jordan K. Hubbard
9e8367bd7a Adjust boot message to conform to reality. 1994-10-26 20:22:10 +00:00
Jordan K. Hubbard
cb72513713 Enable USERCONFIG and document it in LINT. 1994-10-26 19:20:27 +00:00
Jordan K. Hubbard
8d8aa3c30b Add userconfig. 1994-10-26 19:19:12 +00:00
Jordan K. Hubbard
8fa8c074d9 Add my user configuration utility - userconfig().
David wrote the I/O routines for this thing and deserves most of the
credit for thinking the whole idea up.
1994-10-26 19:18:28 +00:00
Jordan K. Hubbard
77283658cb Invoke userconfig() if kernel compiled with options USERCONFIG and
-c flag used.
1994-10-26 18:35:02 +00:00
Jordan K. Hubbard
73ade464e2 Remove the code for asking for a filesystem floppy. We don't need
it anymore, and neither David nor I can think of a reasonable
mechanism to stick in its place.
1994-10-26 13:46:34 +00:00
Jordan K. Hubbard
aa20f6195d Add RB_CONFIG flag. 1994-10-26 13:18:49 +00:00
Jordan K. Hubbard
141066ed62 Fix two very minor nits, one of which caused a warning (no return type for
main).
1994-10-26 10:18:24 +00:00
Poul-Henning Kamp
47c3575419 Fixed a couple of wrong printfs (too few arguments supplied). Also zapped
a couple of unused vars at the same time.  Added a #include <sys/proc.h>
to isa.c while here anyway.
1994-10-26 00:16:20 +00:00
Stefan Eßer
422cdd6132 Modified fifth parameter (imask) to register_intr() according to
new definition of that function.
1994-10-25 23:09:08 +00:00
Stefan Eßer
b56fdd903a BEWARE: Interface change of register_intr() !
Changed the fifth parameter to register_intr() from u_int mask into
u_int *maskptr in preparation for new features (shared interrupts and
removable devices, eg. for PCMCIA).
1994-10-25 23:06:16 +00:00
Stefan Eßer
8627141c50 BEWARE: Interface change of register_intr() !
Changed the fifth parameter to register_intr() from u_int mask into
u_int *maskptr in preparation for new features (shared interrupts and
removable devices, eg. for PCMCIA).
1994-10-25 22:35:12 +00:00
Bruce Evans
40974c748a Never strip the kernel.
Recommend -Wimplicit in CWARNFLAGS next.  There are still a few hundred
potential arg mismatches because no function declaration is in scope.

Don't duplicate option `-I.'.

Remove null editing of the assembler source for all profiled objects.
The required magic has been done since prehistoric times by an
asm("mcount") declaration.

Simplify the clean rule.

Don't try to be clever about timestamps involving genassym.  genassym's
timestamp usually got ahead of assym.s's timestamp, so `make' almost
always had to run genassym and compare *assym.s to decide that nothing
needed to be done.  The cost is reassembling a few files whenever
genassym is rebuilt.  Assembling is almost as fast as comparing.

Always go through genassym.o to build genassym.  This would have avoided
numerous bugs involving mkdep -p.  Now it just stops genassym from
depending on the name of the temporary object file.

Use ${CFLAGS} for building genassym.  Mainly ${CWARNFLAGS} were missing.
1994-10-25 19:34:57 +00:00
Stefan Eßer
c6f2eb5edb Added decoding of chipset registers for Pentium 90/100 CPUs. 1994-10-25 18:45:19 +00:00
Bruce Evans
25f69b0ff8 Use the correct macro for deciding whether syscons' variables should
be accessed.

Remove some unused declarations and document a bogus one.
1994-10-25 18:22:32 +00:00
David Greenman
03ed612f0e Allow MAXMEM kernel option to indicate more memory than is detected; it
previously could only be used to limit the amount of memory.
1994-10-25 08:58:33 +00:00
Steven Wallace
669a646390 Patch to fix QIC-02/QIC-36 by Gene Stark.
From patch003 in CLEAR-1.1.5.1-PATCHES.
Submitted by:	Gene Stark
1994-10-25 08:57:39 +00:00
David Greenman
1b55c5bc85 Restricted maximum bufpages to 1500; this is required for machines >64MB
of memory to work without running out of kernel VM (and increasing it to
even more than it is now (96MB) is out of the question. Changed bufpages
calculation to allocation a little less bufer cache (16% of mem-2MB instead
of 20%); this is simply a better figure for most systems.
1994-10-25 08:34:50 +00:00
David Greenman
a0181c75dd Moved initialization of tmpstk so that it immediately follows the kernel
text. Fixed rounding bug that caused the last page of kernel text to be
read/write instead of read-only. This is important now that tmpstk can
crash into it. Removed +4 bias of tmpstk because it screws up ddb's
ability to traceback correctly.
1994-10-25 07:25:56 +00:00
Søren Schmidt
3c43212ad8 Added sea0 - Seagate driver lines to config 1994-10-24 22:18:12 +00:00