before it is installed.
This upsets Bruce because the host boostrap build forces tools to be
static anyway. He says I'm abusing NOTOOLS in src/Makefile by using
it to do a aout->elf transition build. One day I'll find a place to
install host tools like these to allow a true cross build.
can be used to select them. The purpose of this is not necessarily to
allow another host format, but to allow us to use the objformat trickery
for cross compilation.
a system header defines a macro __printf0like() using the new printf0
format attribute. uucp's internal ulog() function isn't actually
printf-like but uucp normally declares it as such.
tar now exits with new exit code EX_BADDIR after a failed chdir()
in name_next(), name_match(), and name_from_list().
PR: bin/2394
Submitted by: Satoshi Asami <asami@freebsd.org>
name of entry points, functions, subroutines, and program to
stderr error. The enclosed patches do 3 things:
(1) Silenced the output to stderr.
(2) Added a -v option to f2c and f77. This will turn on a verbose
mode, and dumps quite a bit of stuff to stderr.
(3) Updated the f2c man page.
PR: 7369
Submitted by: Steven G. Kargl <kargl@troutmask.apl.washington.edu>
`-C' can be used both when creating and extracting files. Further,
a `-C' inside the argument list causes a `chdir()' to the named
directory before the subsequent filename arguments to be interpreted.
Eg:- "tar -cf a+b.tar -C /a . -C /b ."
PR: 7221
`XCC= <relative cc> -B<path to relative cc1> ...'. This is equivalent
when cc and cc1, etc. have just been bootstrapped by `make world'.
The relative versions normally won't work if the target system is
not binary compatible. Bootstrapping different versions of gcc
without going through `make world' is slightly more broken than
before.
Uniformized macro names (P1OBJS -> LIB1POBJS, etc.).
Don't give full paths to sources.
They have been bootstrapped by `make world' since long before the
hacks here were cloned from ../libgcc/Makefile. The versions just
built in "../*" normally won't work if the target system is not binary
compatible.
Don't use OBJS to defeat `make depend'; just put generated sources in
SRCS.
Added temporary files to CLEANFILES.
bootstrapped by `make world'. The version just built in ".."
normally won't work if the target system is not binary compatible.
The bootstrapped version has a better chance of working.
This makes the fixes and bugs in the previous 3 commits irrelevant.
Rev.1.11 was just wrong and rev.1.10 became unnecessary when
perl/perl was added to build-tools. Don't expect to build perl/usub
without using `make world' or equivalent if you don't have perl
installed.
was already put in SRCS by the general yacc rules. Putting ldemul-list.h
in SRCS fixes races in `make -jN' when .depend hasn't been made.
Don't forget to clean ldemul-list.h.
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
Move our old a.out utils to /usr/libexec/aout.
Enable binutils and put the utils in /usr/libexec/elf
Enable objformat, a little helper program that calls the right
utils based on /etc/objformat and $OBJFORMAT.
This will enable the ELF generating tools.
Remember that this is only step one, the system is still compiled
and run in a.out format ONLY.
Problem left to solve: The BSD manpages wins over the GNU equivalents
as the are installed last. We need to distinguish between the manpages
somehow...
CURDIR it has been built without an obj directory; however if it is in
neither of those places, we expect it to be in DESTDIR.
Yes Bruce, I know this is broken because the host is not supposed to be
the same as the target, but we need to get the hosted build working
properly first before even attempting a cross compiled operating
system build. That will need to concept of TOOLSDIR or something that
can be mapped to DESTDIR in the case of a hosted build and set to the
installed tools in a cross compiled build. Later, later, later!
perl executable from overriding the object directory path search where
perl is most likely to be. Most people haven't seen this because it
defaulted to /usr/bin/perl which might be OK as a fallback, but when
bootstrapping a new version (or the *first* version on alpha), we don't
really want to use /usr/bin/perl.
kernel's) curproc is null. This fixes endless recursion in
xfer_umem() for attempts to read from user addresses, in particular
for attempts to read %fs and %gs from the pcb for `info reg'.
gas for each target format. So for m68k targets that means several
gases. I wanted a m68k gas for VxWorks which uses aout in sun3 big
endian format, cross compiled on i386 under FreeBSD using libraries
supplied by DEC and intended by them for cross compilation on Alpha
under OSF/1. And it actually works!
support more than one architecture at a time, build as from the
default for the host and if CROSS_TOOLS defines other architectures,
build them as as_${arch}
are now included according to the cross-architecture support required,
default the BINDIR for i386 to /usr/libexec/elf here instead of in
all the i386 specific makefiles. For all other architectures, BINDIR
is just /usr/bin.
be defined (in /etc/make.conf, say) and set to the additional architectures
that need to be compiled in. So on alpha I set CROSS_TOOLS = i386.
On i386 you can't build alpha due to lack of 64-bit support on 32-bit
architectures, but that's a GNU problem.
This change relies on makefiles in the binutils sub-directories having
the extension defined in the CROSS_TOOLS, instead of those makefiles
being selected based on the host architecture.
worked because .ORDER prevented problems from concurrent generation
of multiple parsers (and their headers), and there were no missing
dependencies because the generated headers were not actually used.
with `make -jN' because they did the right things to generate cexp.h
without clobbering cexp.c, and there were no missing dependencies on
cexp.h because cexp.h isn't actually used.
Fixed style bugs.
bsd.man.mk doesn't include ${.CURDIR}/../Makefile.inc.
Removed GDBDIR-redefinition-prevention ifdef. It hasn't done anothing
for a long time, if ever. The directory is defined to the same value in
each subdir and had the same value because all subdirs are at the same
level. Keep defining it in the subdirs since that is more flexible and
no more verbose.
Prepare to inherit BINDIR by including ../Makefile.inc.
requires the new file.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
$Id$ should be preceded by a tab
Don't include ../Makefile.inc when it is not used explicitly
Use the normal amount of horizontal and vertical whitspace (1 tab/none)
Don't override the (correct) default for MAN1
Use the correct order for -I paths
Use config.h generated by `configure', don't use a huge CFLAGS statement
Enable useage of libreadline in config.h, configure didn't enable it itself.
- Makefiles shouldn't have copyrights.
- $Id$ should be preceded by a tab.
- Don't include ../Makefile.inc when it is not used explicitly.
- Use the normal amount of horizontal and vertical whitspace (1 tab/none).
- Don't override the (correct) default for MAN1.
- Use the correct order for -I paths.
- Don't use += to initialize SUBDIR.
- use the config.h generated by `configure' and don't use a huge
CFLAGS statement.
I think the other Makefiles under src/gnu needs some polishing as well ;-)
Thanks to Bruce, everythig looks smarter now.
Obtained from: Bruce Evans <bde@zeta.org.au>
