Commit Graph

211 Commits

Author SHA1 Message Date
George V. Neville-Neil
57d025c338 Add support for walltimestamp in DTrace.
Submitted by:	Fabian Keil
MFC after:	2 weeks
2012-07-16 20:17:19 +00:00
Konstantin Belousov
21c295ef88 Stop updating the struct vdso_timehands from even handler executed in
the scheduled task from tc_windup(). Do it directly from tc_windup in
interrupt context [1].

Establish the permanent mapping of the shared page into the kernel
address space, avoiding the potential need to sleep waiting for
allocation of sf buffer during vdso_timehands update. As a
consequence, shared_page_write_start() and shared_page_write_end()
functions are not needed anymore.

Guess and memorize the pointers to native host and compat32 sysentvec
during initialization, to avoid the need to get shared_page_alloc_sx
lock during the update.

In tc_fill_vdso_timehands(), do not loop waiting for timehands
generation to stabilize, since vdso_timehands is written in the same
interrupt context which wrote timehands.

Requested by:	  mav [1]
MFC after:	  29 days
2012-06-23 09:33:06 +00:00
Konstantin Belousov
aea810386d Implement mechanism to export some kernel timekeeping data to
usermode, using shared page.  The structures and functions have vdso
prefix, to indicate the intended location of the code in some future.

The versioned per-algorithm data is exported in the format of struct
vdso_timehands, which mostly repeats the content of in-kernel struct
timehands. Usermode reading of the structure can be lockless.
Compatibility export for 32bit processes on 64bit host is also
provided. Kernel also provides usermode with indication about
currently used timecounter, so that libc can fall back to syscall if
configured timecounter is unknown to usermode code.

The shared data updates are initiated both from the tc_windup(), where
a fast task is queued to do the update, and from sysctl handlers which
change timecounter. A manual override switch
kern.timecounter.fast_gettime allows to turn off the mechanism.

Only x86 architectures export the real algorithm data, and there, only
for tsc timecounter. HPET counters page could be exported as well, but
I prefer to not further glue the kernel and libc ABI there until
proper vdso-based solution is developed.

Minimal stubs neccessary for non-x86 architectures to still compile
are provided.

Discussed with:	bde
Reviewed by:	jhb
Tested by:	flo
MFC after:	1 month
2012-06-22 07:06:40 +00:00
Juli Mallett
9624d94701 o) Add COMPAT_FREEBSD32 support for MIPS kernels using the n64 ABI with userlands
using the o32 ABI.  This mostly follows nwhitehorn's lead in implementing
   COMPAT_FREEBSD32 on powerpc64.
o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the
   32-bit ABI being used.  Since the MIPS port is relatively-new, even the 32-bit
   ABIs use a 64-bit time_t.
o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS
   with 32-bit compatibility, then, disable some code which assumes otherwise
   wrongly when built for MIPS.  A more general macro to check in this case would
   seem like a good idea eventually.  If someone adds support for using n32
   userland with n64 kernels on MIPS, then they will have to add a variety of
   flags related to each piece of the ABI that can vary.  That's probably the
   right time to generalize further.
o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the
   freebsd32 compat code.  Probably this should be generalized at some point.

Reviewed by:	gonzo
2012-03-03 08:19:18 +00:00
Kevin Lo
de02885a7b Add a missing break. This bug was introduced in r228856. 2012-02-10 06:30:52 +00:00
Lawrence Stewart
6cedd609b7 Introduce the sysclock_getsnapshot() and sysclock_snap2bintime() KPIs. The
sysclock_getsnapshot() function allows the caller to obtain a snapshot of all
the system clock and timecounter state required to create time stamps at a later
point. The sysclock_snap2bintime() function converts a previously obtained
snapshot into a bintime time stamp according to the specified flags e.g. which
system clock, uptime vs absolute time, etc.

These KPIs enable useful functionality, including direct comparison of the
feedback and feed-forward system clocks and generation of multiple time stamps
with different formats from a single timecounter read.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

In collaboration with:	Julien Ridoux (jridoux at unimelb edu au)
2011-12-24 01:32:01 +00:00
Lawrence Stewart
88394fe42c Do away with the somewhat clunky sysclock_ops structure and associated code,
reimplementing the [get]{bin,nano,micro}[up]time() wrapper functions in terms of
the new "fromclock" API instead.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Discussed with:	Julien Ridoux (jridoux at unimelb edu au)
Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-29 08:33:40 +00:00
Lawrence Stewart
e977bac333 Make the fbclock_[get]{bin,nano,micro}[up]time() function prototypes public so
that new APIs with some performance sensitivity can be built on top of them.
These functions should not be called directly except in special circumstances.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Discussed with:	Julien Ridoux (jridoux at unimelb edu au)
Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-29 06:53:36 +00:00
Lawrence Stewart
c2a4ee9906 Fix an oversight in r227747 by calling fbclock_bin{up}time() directly from the
fbclock_{nanouptime|microuptime|bintime|nanotime|microtime}() functions to avoid
indirecting through a sysclock_ops wrapper function.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-29 06:12:19 +00:00
Lawrence Stewart
65e359a15c - Add Pulse-Per-Second timestamping using raw ffcounter and corresponding
ffclock time in seconds.

- Add IOCTL to retrieve ffclock timestamps from userland.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-21 13:34:29 +00:00
Lawrence Stewart
9bce0f05fe - Provide a sysctl interface to change the active system clock at runtime.
- Wrap [get]{bin,nano,micro}[up]time() functions of sys/time.h to allow
  requesting time from either the feedback or the feed-forward clock. If a
  feedback (e.g. ntpd) and feed-forward (e.g. radclock) daemon are both running
  on the system, both kernel clocks are updated but only one serves time.

- Add similar wrappers for the feed-forward difference clock.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-20 05:32:12 +00:00
Lawrence Stewart
b0fdc83713 Core structure and functions to support a feed-forward clock within the kernel.
Implement ffcounter, a monotonically increasing cumulative counter on top of the
active timecounter. Provide low-level functions to read the ffcounter and
convert it to absolute time or a time interval in seconds using the current
ffclock estimates, which track the drift of the oscillator. Add a ring of
fftimehands to track passing of time on each kernel tick and pick up updates of
ffclock estimates.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-19 14:10:16 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Jung-uk Kim
08e1b4f4a9 If TSC stops ticking in C3, disable deep sleep when the user forcefully
select TSC as timecounter hardware.

Tested by:	Fabian Keil (freebsd-listen at fabiankeil dot de)
2011-07-14 21:00:26 +00:00
Matthew D Fleming
cbc134ad03 Introduce signed and unsigned version of CTLTYPE_QUAD, renaming
existing uses.  Rename sysctl_handle_quad() to sysctl_handle_64().
2011-01-19 23:00:25 +00:00
Colin Percival
772d1e42a2 Add parentheses for clarity. The parentheses around the two terms of the &&
are unnecessary but I'm leaving them in for the sake of avoiding confusion
(I confuse easily).

Submitted by:	bde
2010-11-23 04:50:01 +00:00
Colin Percival
aa519c0a64 In tc_windup, handle the case where the previous call to tc_windup was
more than 1s earlier.  Prior to this commit, the computation of
th_scale * delta (which produces a 64-bit value equal to the time since
the last tc_windup call in units of 2^(-64) seconds) would overflow and
any complete seconds would be lost.

We fix this by repeatedly converting tc_frequency units of timecounter
to one seconds; this is not exactly correct, since it loses the NTP
adjustment, but if we find ourselves going more than 1s at a time between
clock interrupts, losing a few seconds worth of NTP adjustments is the
least of our problems...
2010-11-22 09:13:25 +00:00
Rebecca Cran
8d065a3914 Fix some more style(9) issues. 2010-11-14 16:10:15 +00:00
Rebecca Cran
b389be97db Fix style(9) issues from r215281 and r215282.
MFC after:	1 week
2010-11-14 08:06:29 +00:00
Rebecca Cran
2baa5cddb6 Add some descriptions to sys/kern sysctls.
PR:	kern/148710
Tested by:	Chip Camden <sterling at camdensoftware.com>
MFC after:	1 week
2010-11-14 06:09:50 +00:00
Alexander Motin
95d23438dd Until hardclock() and respectively tc_windup() called first time, system
is running on "dummy" time counter. But to function properly in one-shot
mode, event timer management code requires working time counter. Slow
moving "dummy" time counter delays first hardclock() call by few seconds
on my systems, even though timer interrupts were correctly kicking kernel.
That causes few seconds delay during boot with one-shot mode enabled.

To break this loop, explicitly call tc_windup() first time during
initialization process to let it switch to some real time counter.
2010-09-21 08:02:02 +00:00
Alexander Motin
0e18987383 Make kern_tc.c provide minimum frequency of tc_ticktock() calls, required
to handle current timecounter wraps. Make kern_clocksource.c to honor that
requirement, scheduling sleeps on first CPU for no more then specified
period. Allow other CPUs to sleep up to 1/4 second (for any case).
2010-09-14 08:48:06 +00:00
Alexander Motin
a157e42516 Refactor timer management code with priority to one-shot operation mode.
The main goal of this is to generate timer interrupts only when there is
some work to do. When CPU is busy interrupts are generating at full rate
of hz + stathz to fullfill scheduler and timekeeping requirements. But
when CPU is idle, only minimum set of interrupts (down to 8 interrupts per
second per CPU now), needed to handle scheduled callouts is executed.
This allows significantly increase idle CPU sleep time, increasing effect
of static power-saving technologies. Also it should reduce host CPU load
on virtualized systems, when guest system is idle.

There is set of tunables, also available as writable sysctls, allowing to
control wanted event timer subsystem behavior:
  kern.eventtimer.timer - allows to choose event timer hardware to use.
On x86 there is up to 4 different kinds of timers. Depending on whether
chosen timer is per-CPU, behavior of other options slightly differs.
  kern.eventtimer.periodic - allows to choose periodic and one-shot
operation mode. In periodic mode, current timer hardware taken as the only
source of time for time events. This mode is quite alike to previous kernel
behavior. One-shot mode instead uses currently selected time counter
hardware to schedule all needed events one by one and program timer to
generate interrupt exactly in specified time. Default value depends of
chosen timer capabilities, but one-shot mode is preferred, until other is
forced by user or hardware.
  kern.eventtimer.singlemul - in periodic mode specifies how much times
higher timer frequency should be, to not strictly alias hardclock() and
statclock() events. Default values are 2 and 4, but could be reduced to 1
if extra interrupts are unwanted.
  kern.eventtimer.idletick - makes each CPU to receive every timer interrupt
independently of whether they busy or not. By default this options is
disabled. If chosen timer is per-CPU and runs in periodic mode, this option
has no effect - all interrupts are generating.

As soon as this patch modifies cpu_idle() on some platforms, I have also
refactored one on x86. Now it makes use of MONITOR/MWAIT instrunctions
(if supported) under high sleep/wakeup rate, as fast alternative to other
methods. It allows SMP scheduler to wake up sleeping CPUs much faster
without using IPI, significantly increasing performance on some highly
task-switching loads.

Tested by:	many (on i386, amd64, sparc64 and powerc)
H/W donated by:	Gheorghe Ardelean
Sponsored by:	iXsystems, Inc.
2010-09-13 07:25:35 +00:00
Edward Tomasz Napierala
1a996ed1d8 Revert r210225 - turns out I was wrong; the "/*-" is not license-only
thing; it's also used to indicate that the comment should not be automatically
rewrapped.

Explained by:	cperciva@
2010-07-18 20:57:53 +00:00
Edward Tomasz Napierala
805cc58ac0 The "/*-" comment marker is supposed to denote copyrights. Remove non-copyright
occurences from sys/sys/ and sys/kern/.
2010-07-18 20:23:10 +00:00
Alexander Motin
3bc5958c0e Remove interval validation from cpu_tick_calibrate(). As I found, check
was needed at preliminary version of the patch, where number of CPU ticks
was divided strictly on 16 seconds. Final code instead uses real interval
duration, so precise interval should not be important. Same time aliasing
issues around second boundary causes false positives, periodically logging
useless "t_delta ... too long/short" messages when HZ set below 256.
2010-07-11 16:47:45 +00:00
Ed Schouten
60ae52f785 Use ISO C99 integer types in sys/kern where possible.
There are only about 100 occurences of the BSD-specific u_int*_t
datatypes in sys/kern. The ISO C99 integer types are used here more
often.
2010-06-21 09:55:56 +00:00
Jung-uk Kim
547d94bde3 Implement flexible BPF timestamping framework.
- Allow setting format, resolution and accuracy of BPF time stamps per
listener.  Previously, we were only able to use microtime(9).  Now we can
set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command.
Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP
command.  Document all supported options in bpf(4) and their uses.

- Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'.
The new time stamp has both 64-bit second and fractional parts.  bpf_xhdr
has this time stamp instead of 'struct timeval' for bh_tstamp.  The new
structures let us use bh_tstamp of same size on both 32-bit and 64-bit
platforms without adding additional shims for 32-bit binaries.  On 64-bit
platforms, size of BPF header does not change compared to bpf_hdr as its
members are already all 64-bit long.  On 32-bit platforms, the size may
increase by 8 bytes.  For backward compatibility, struct bpf_hdr with
struct timeval is still the default header unless new time stamp format is
explicitly requested.  However, the behaviour may change in the future and
all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now.

- Add experimental support for tagging mbufs with time stamps from a lower
layer, e.g., device driver.  Currently, mbuf_tags(9) is used to tag mbufs.
The time stamps must be uptime in 'struct bintime' format as binuptime(9)
and getbinuptime(9) do.

Reviewed by:	net@
2010-06-15 19:28:44 +00:00
Robert Watson
89f28b1b86 Remove conditionally compiled time counter statistics; tools like
DTrace, kernel profiling, etc, can provide this information without
the overhead.

MFC after:	3 days
Suggested by:	bde
2009-04-11 22:01:40 +00:00
Robert Watson
83160d1408 By default, don't compile in counters of calls to various time
query functions in the kernel, as these effectively serialize
parallel calls to the gettimeofday(2) system call, as well as
other kernel services that use timestamps.

Use the NetBSD version of the fix (kern_tc.c:1.32 by ad@) as
they have picked up our timecounter code and also ran into the
same problem.

Reported by:	kris
Obtained from:	NetBSD
MFC after:	3 days
2009-03-08 22:19:28 +00:00
Robert Watson
237fdd787b In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation.  This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.

MFC after:	1 month
Discussed with:	imp, rink
2008-03-16 10:58:09 +00:00
Warner Losh
6b4d690c62 Fix typo in comment. 2008-02-17 02:46:54 +00:00
David E. O'Brien
bedff79a00 Note what is too {short,long}. 2008-01-02 18:48:27 +00:00
David Malone
041b706b2f Despite several examples in the kernel, the third argument of
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.

Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.

In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported.  In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
2007-06-04 18:25:08 +00:00
Yaroslav Tykhiy
776fc0e90e Commit the results of the typo hunt by Darren Pilgrim.
This change affects documentation and comments only,
no real code involved.

PR:		misc/101245
Submitted by:	Darren Pilgrim <darren pilgrim bitfreak org>
Tested by:	md5(1)
MFC after:	1 week
2006-08-04 07:56:35 +00:00
David Malone
93ef14a74b Add a kern.timecounter.tc sysctl tree that contains the mask,
frequency, quality and current value of each available time counter.

At the moment all of these are read-only, but it might make sense to
make some of these read-write in the future.

MFC after:	3 months
2006-06-16 20:29:05 +00:00
Poul-Henning Kamp
590487078f Disable the "cputick increased..." message now that the dust has settled. 2006-03-15 20:22:32 +00:00
Poul-Henning Kamp
fef527ee73 Oops, forgot newline. 2006-03-09 09:44:10 +00:00
Poul-Henning Kamp
6cda760f09 silence cpu_tick calibration and notice only (under bootverbose)
when the frequency increases.
2006-03-09 09:30:33 +00:00
John Baldwin
88ca07e79a Style nit. 2006-03-07 22:17:26 +00:00
Poul-Henning Kamp
fccfcfba00 Add missing cast. 2006-03-04 06:07:26 +00:00
Poul-Henning Kamp
5b51d1de62 More detailed logging if timestepwarnings are enabled. 2006-03-04 06:06:43 +00:00
Poul-Henning Kamp
301af28a06 Suffer a little bit of math every 16 second and tighten calibration of
cpu_ticks to the low side of PPM.
2006-03-02 08:09:46 +00:00
Poul-Henning Kamp
e8444a7e6f CPU time accounting speedup (step 2)
Keep accounting time (in per-cpu) cputicks and the statistics counts
in the thread and summarize into struct proc when at context switch.

Don't reach across CPUs in calcru().

Add code to calibrate the top speed of cpu_tickrate() for variable
cpu_tick hardware (like TSC on power managed machines).

Don't enforce monotonicity (at least for now) in calcru.  While the
calibrated cpu_tickrate ramps up it may not be true.

Use 27MHz counter on i386/Geode.

Use TSC on amd64 & i386 if present.

Use tick counter on sparc64
2006-02-11 09:33:07 +00:00
Poul-Henning Kamp
5b1a8eb397 Modify the way we account for CPU time spent (step 1)
Keep track of time spent by the cpu in various contexts in units of
"cputicks" and scale to real-world microsec^H^H^H^H^H^H^H^Hclock_t
only when somebody wants to inspect the numbers.

For now "cputicks" are still derived from the current timecounter
and therefore things should by definition remain sensible also on
SMP machines.  (The main reason for this first milestone commit is
to verify that hypothesis.)

On slower machines, the avoided multiplications to normalize timestams
at every context switch, comes out as a 5-7% better score on the
unixbench/context1 microbenchmark.  On more modern hardware no change
in performance is seen.
2006-02-07 21:22:02 +00:00
Andre Oppermann
e452573df7 Start time_uptime with 1 instead of 0.
Discussed with:		phk
2005-09-19 22:16:31 +00:00
David E. O'Brien
5b1c0294e4 Forward declaring static variables as extern is invalid ISO-C. Now that
GCC can properly handle forward static declarations, do this properly.
2005-09-07 10:06:14 +00:00
Poul-Henning Kamp
f83856243d s/ENOTTY/ENOIOCTL/ 2005-03-26 20:04:28 +00:00
Peter Wemm
a7bc3102c4 Put on my peril sensitive sunglasses and add a flags field to the internal
sysctl routines and state.  Add some code to use it for signalling the need
to downconvert a data structure to 32 bits on a 64 bit OS when requested by
a 32 bit app.

I tried to do this in a generic abi wrapper that intercepted the sysctl
oid's, or looked up the format string etc, but it was a real can of worms
that turned into a fragile mess before I even got it partially working.

With this, we can now run 'sysctl -a' on a 32 bit sysctl binary and have
it not abort.  Things like netstat, ps, etc have a long way to go.

This also fixes a bug in the kern.ps_strings and kern.usrstack hacks.
These do matter very much because they are used by libc_r and other things.
2004-10-11 22:04:16 +00:00
Poul-Henning Kamp
d8e8b6755c Add some KASSERTS. 2004-08-14 08:33:49 +00:00