Commit Graph

32 Commits

Author SHA1 Message Date
Brian Somers
e304484545 Handle the detection of frames even if we read them
with more than one read().  When we detect one, don't
forget to pass it to async_Input() and drop our
terminal back into command mode.

Don't output an extraneous \r if we're passed \r\n
to prompt_vprintf in raw mode.
1999-04-03 11:54:00 +00:00
Brian Somers
6b4286e0f5 Wait by default for one second after the login script
is complete before checking carrier.  If it's there,
the device supports carrier.  If it's not it doesn't.

Add the ``set cd'' command for deciding how soon to check
for carrier, and for deciding if carrier is REQUIRED.

The default has changed:  Pre 2.0 versions of ppp waited
for 1 second.  Version 2 didn't wait, but this causes
problems with some (few?) modems that don't assert carrier
immediately on reporting CONNECT.  The one second delay
is back now and can be removed with ``set cd 0''.

Bump the ppp version number in case this needs to be changed
again....
1999-02-16 00:16:56 +00:00
Brian Somers
c0cdeb7c06 Only call isatty() when we open our descriptor, and remember
the answer.

If we later get a descriptor exception from select(), we know
that it's a tty (isatty() returns 0 after the exception on a
tty) and remember to call modem_LogicalClose().

The upshot of it all is that descriptor exceptions dont leave
the tty locked any more.
1999-01-10 01:26:30 +00:00
Brian Somers
6f8e9f0a8a If we've got a full output buffer queue and cannot send
anything for two mintues (see ``set choked'' and ``show
bundle''), nuke the ip, mp and link level buffer queues.

This should fix problems where ``ppp -auto'' seems to stop
responding after failing to connect to the peer a few times.
1998-08-25 17:48:43 +00:00
Brian Somers
8e7b85992b o If there's a session leader left running for a descriptor
that we're now closing, manually HUP that session leader
  so that the tty is fully released.
o Always restart our carrier detect timer in the receiving
  process if it was running in the sending process (as we
  now *always* pass the descriptor).
o Tweak argv when we go into pause() mode to keep our session
  so that ps can see what's going on (without checking for a
  `pause' state in `ps -l').
1998-05-29 18:33:10 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd0645c5b7 o Add the `set mode' command for change a links current mode. It
is not possible to switch to or from dedicated or direct mode,
  but all other combinations are ok (eg. -auto -> -ddial).
o Cope with the fact that commands with optional context may not
  be able to obtain a link with command_ChooseLink() (if all links
  have been deleted for example).
o Allow `clone'ing in non-multilink mode.  We may for example want
  to configure two links in unilink mode and dial them both, using
  the one that comes up first.  It's also possible to rename
  ``deflink'' by cloning it, deleting the original, then setting
  the mode of the new link.
1998-05-15 23:58:30 +00:00
Brian Somers
ea7229694b o Call bundle_LinkClosed() when transferring a datalink so that
the bundle has the opportunity to go PHASE_DEAD and cleanup
  the interface (if it's the last link).
o Regnerate our phys_type value when we transfer the link.
o Always clean up the interface when destroying our bundle in case
  we're abending.
o Always clean up our interface when the last link is gone rather than
  delaying things 'till exit time in the -direct case (the interface
  is useless anyway).  Do this *after* slamming down our NCPs (if
  they're still around).
o Our MP server descriptor now clears the relevent device descriptor
  from our descriptor [fd]sets when a datalink is on death-row (to
  be transferred to another running ppp), thus avoiding the possibility
  of passing a bum descriptor to select() and having ppp abend.
o Handle the MP socket descriptor functions from within the bundle
  descriptor functions.  Now we ensure that the MP socket descriptor
  functions see the descriptor sets *after* they've been seen by our
  datalinks.
o Add/fix a few more comments.
1998-05-15 18:21:45 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
b762af4f95 o Explicitly set the close-on-exec flag of descriptor 3 before
exec()ing.  Tidy up file dups in general prior to exec().
  This prevents our tun device (fd 3) from staying open (and
  configured) despite handing off all it's links and exiting
  (because ``cat'' holds it open).
o Don't bother SIG_DFL'ing signals before exec() as they're
  already trapped with specific handlers and will be handled
  correctly by the exec.
o Use values from paths.h for "/dev/" and "/dev/tty".
o Don't assert() in physical.c.
1998-05-01 19:22:23 +00:00
Brian Somers
f45c790690 Do away with the static struct timeoutArg. Move the
struct pppTimer from struct link to struct physical
for doing carrier checking.
1998-04-20 00:20:41 +00:00
Brian Somers
99294c8bfa o Fix chats expect-send-expect - it shouldn't be
expect-send-send !
o Say `disabled' rather than 0s in `show timeout'.
o Set all arguments in ``set device'' rather than just
  the first (read: quotes aren't necessary).
o Set the device speed correctly (broken in last commit).
1998-04-10 23:51:33 +00:00
Brian Somers
565e35e50e o Remove the `mode' global - it's now per physical device.
o Shuffle things that live at the datalink level into
  ``show link'' rather than ``show modem''.
o Make both ``show'' commands prettier and more consistent,
  and display carrier status, link type and our name in
  ``show modem''.
o Show redial and reconnect information in ``show link''
  and remove ``show redial'' and ``show reconnect''.
o Down the correct link in bundle_LinkLost().
o Remove stale -direct and -background links at the end
  of our main loop, not when we know they're going.  This
  prevents unexpected pointer-invalidations...
o If we ``set server'' with the same values twice, notice
  and don't moan about failure.
o Record dial script despite our link mode.  The mode may
  be changed later (next mod) :-)  We never run scripts
  in -direct and -dedicated modes.
o Make ``set server none'' functional again.
o Correct datalink state array so that we don't report an
  ``unknown'' state.
o Pass struct ipcp to IpcpCleanInterface, not struct fsm.
o Create TUN_PREFIX define rather than hard-coding in main.c
o prompt_TtyInit now handles a NULL prompt for -direct mode
  rather than having to create one then destroy it uncleanly.
o Mention our mode in the "PPP Started" LogPHASE message.
o Bring all auto links up when we have something to send.
o Remove some redundant Physical_*() functions.
o Show which connection is running a command when logging
  commands.
o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Brian Somers
2f7866811e Make struct bundle into a sort of `struct descriptor'.
It does the fdsets/reads/writes for each of it's
datalinks.
1998-03-20 19:48:28 +00:00
Brian Somers
4c2d498275 Remove struct physical::abort. 1998-03-20 19:47:22 +00:00
Brian Somers
dc0fdb6bc1 "dial" now may optionally have context.
Tidy up some LcpInfo uses.
1998-03-13 00:44:51 +00:00
Brian Somers
fc1141b27b Move `Utmp' into struct physical. We can be logged in
once for every -direct physical connection.
1998-03-10 03:06:07 +00:00
Brian Somers
3bf710a4ba o Move all device names into struct physical.
o Use the correct device name in -direct mode.
o Use a default list of "cuaa1, cuaa0" rather than
  just cuaa1 and allow embedded spaces as separators.
1998-03-06 00:34:47 +00:00
Brian Somers
f4768038f0 o Remove the global CcpInfo. It's now part of the datalink.
Struct bundle will have its own struct ccp in the future
  too.
o The ``set stopped'' command now requires context and doesn't
  work on the IPCP FSM.
o Check if it's time to break out of our top level loop before
  doing a select - otherwise, we'll select forever :-(
o Remove `struct link'::ccp (a temporary hack).  It turns out
  that IpStartOutput() calls link_Output() and link_Output()
  incorrectly calls StartOutput() (really modem_StartOutput)
  requiring the ccp knowledge so that it can call
  IpStartOutput()...  The end result is that the whole IP
  output queue gets dumped into the modem output queue
  and a pile of physical writes are done prematurely.  This
  makes the (original) code in main() actually work in that
  it would not bother selecting() on the tun descriptor when
  our modem queue length was 20 or greater.  Instead, we now
  make that decision based on the overall queue length.

  This will need improvement later.
1998-02-23 00:38:44 +00:00
Brian Somers
503a7782d8 Shuffle around our FSMs a bit. This'll make it
easier to remove the CcpInfo, LcpInfo and IpcpInfo
globals.
1998-02-21 01:45:26 +00:00
Brian Somers
63258dccc5 o Create `struct hdlc' - a part of struct physical.
o Move our LCP report timer into struct hdlc - it's really
  a hdlc timer (fcs errors etc).
o Make `show hdlc' require context and make the output more
  friendly.
o Remove all non-const globals from hdlc.c
o Output peer-rejected protocols by name - not just ones
  that we reject.
1998-02-18 19:35:59 +00:00
Brian Somers
d585f8f51b Cosmetic: Group configuration items in struct physical. 1998-02-17 19:29:03 +00:00
Brian Somers
b6dec9f07f Update to version 2.0-beta
Allow for NULL fd_sets in descriptor_UpdateSet()
Reimplement the entire chat module, creating
`struct chat' - a `type' of struct descriptor.
Remove CARRIER logging.
CONNECT logging now only logs "CONNECT" lines.  CHAT logging
masks it with an entire log of the conversation.

Modem dialing is now asynchronous, including pauses
and timeouts :-)

The hooks in DoLoop() in main.c are *very* messy !  I'll have
to rewrite DoLoop fairly soon, so I don't care too much for the
moment.  This code is pretty raw.
1998-02-13 05:10:26 +00:00
Brian Somers
b77776a7f2 Pass the fdset to descriptor_Read & descriptor_Write
allowing support for the use of multiple file descriptors.
1998-02-10 03:22:05 +00:00
Brian Somers
42d4d39668 o Introduce struct descriptor.
This will ultimately be a member of a list of descriptors and
  their handler functions on which we need to select() in the
  main loop.
o Make struct physical into a `sort' of struct descriptor.
1998-02-09 19:21:11 +00:00
Brian Somers
83d1af558c Isolate fsm callback functions
Derive {lcp,ipcp,ccp}state structures from struct fsm
where convenient.
Create bundle_Down() and remove LcpDown()
1998-02-06 02:24:29 +00:00
Brian Somers
ecd5172a68 Shuffle names and args in modem.h 1998-02-06 02:22:28 +00:00
Brian Somers
6140ba1177 Create struct async' and make it part of struct physical'.
This structure contains the asynchronous state of the physical
link.
Unfortunately, just about every .h file is included in every .c
file now.  Fixing this can be one of the last jobs.
1998-02-02 19:33:40 +00:00
Brian Somers
8c07a7b2e0 Create `struct link' - the logical link from which
`struct physical' (and the future `struct logical')
are derived.
1998-01-30 19:46:07 +00:00
Brian Somers
63b7346316 Create a new MP branch for `multilink protocol'.
Do lots of initial shuffling and grouping.
Submitted by: Eivind Eklund <perhaps@yes.no>
1998-01-29 00:49:32 +00:00