Commit Graph

1304 Commits

Author SHA1 Message Date
Pedro F. Giffuni
ec5753e0eb mppc - Finish pluging NETGRAPH_MPPC_COMPRESSION.
There were several places where reference to compression were left
unfinished. Furthermore, KASSERTs contained references to MPPC_INVALID
which is not defined in the tree and therefore were sure to break with
INVARIANTS: comment them out.

Reported by:	Eugene Grosbein
PR:		216265
MFC after:	3 days
2017-01-20 00:02:11 +00:00
Julian Elischer
426b3d047a Changes to allow the patching of packets with an offset (and other changes.. see man page)
PR:	206185
Submitted by:	Dmitry Vagin <daemon-hammer@ya.ru>
MFC after:	 1 week
Relnotes:	yes (also ng_checksum node)
2016-12-02 10:47:10 +00:00
Hans Petter Selasky
0e493ed3a5 Fix return value from ng_uncallout().
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.

Discussed with:		julian, glebius
MFC after:		2 weeks
2016-12-02 09:29:22 +00:00
Bjoern A. Zeeb
310dc5a403 Writing out the L2TP control packet requires 12 bytes of
contiguous memory but in one path we did not always guarantee this,
thus do a m_pullup() there.

PR:			214385
Submitted by:		Joe Jones (joeknockando googlemail.com)
MFC after:		3 days
2016-11-17 14:03:44 +00:00
Bryan Drewery
28323add09 Fix improper use of "its".
Sponsored by:	Dell EMC Isilon
2016-11-08 23:59:41 +00:00
Sean Bruno
2f632dbb0b Avoid panic from ng_uncallout when unpluggin ethernet cable with active
PPTP VPN connection.

Submitted by:	Michael Zhilin <mizhka@gmail.com>
Reviewed by:	ngie
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D7209
2016-08-08 19:31:01 +00:00
Julian Elischer
d7373c820e netgraph module for reconstructing checksums
PR:		206108
Submitted by:	Dmitry Vagin  daemon.hammer@ya.ru
MFC after:	1 month
2016-08-01 12:09:04 +00:00
Julian Elischer
bf909fc9a4 slite style changes. There is an incoming patch that rewrites a
lot of this module and I want to get the style and whitespace changes in
a separate commit (or maybe more).

PR: 206185
Submitted by:	Dmitry Vagin
MFC after:	1 month
2016-08-01 11:34:12 +00:00
Bjoern A. Zeeb
89856f7e2d Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
Takanori Watanabe
b32073c458 Disconnect LE socket when the HCI connection associated is disconnected. 2016-06-07 16:57:13 +00:00
Jung-uk Kim
ccabe8433f Fix style(9). 2016-05-26 19:17:51 +00:00
Jung-uk Kim
a42aa5facd Use bit_count(3) instead of four bitcount32() calls.
Reviewed by:	asomers, ngie
Differential Revision:	https://reviews.freebsd.org/D6543
2016-05-26 18:57:26 +00:00
Pedro F. Giffuni
053359b7f4 sys/netgraph: spelling fixes in comments.
No functional change.
2016-04-29 21:25:05 +00:00
Pedro F. Giffuni
55e0987aea sys: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:38:17 +00:00
Pedro F. Giffuni
323b076e9c sys: use our nitems() macro when param.h is available.
This should cover all the remaining cases in the kernel.

Discussed in:	freebsd-current
2016-04-21 19:40:10 +00:00
Pedro F. Giffuni
8dfea46460 Remove slightly used const values that can be replaced with nitems().
Suggested by:	jhb
2016-04-21 15:38:28 +00:00
Pedro F. Giffuni
155d72c498 sys/net* : for pointers replace 0 with NULL.
Mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-15 17:30:33 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Gleb Smirnoff
8ec07310fa These files were getting sys/malloc.h and vm/uma.h with header pollution
via sys/mbuf.h
2016-02-01 17:41:21 +00:00
Alexander V. Chernikov
6369f51bc8 Make ng_netflow(9) use new routing KPI.
Netflow module is supposed to store (along with fields like
  gateway address and interface index) matched netmask for each record.
  This (currently) requires returning individual route entries, instead
  of optimized next-hop structure. Given that, use control-plane
  rib_lookup_info() function to avoid accessing rtentries directly.
While rib_lookup_info() might be slower, than fibX_lookup() flavours,
  it is more scalable than rtalloc1_fib(), because rtentry mutex is
  not acquired.
2016-01-14 13:14:12 +00:00
Alexander V. Chernikov
ea8d14925c Remove sys/eventhandler.h from net/route.h
Reviewed by:	ae
2016-01-09 09:34:39 +00:00
Gleb Smirnoff
829fae9063 Make it possible for sbappend() to preserve M_NOTREADY on mbufs, just like
sbappendstream() does. Although, M_NOTREADY may appear only on SOCK_STREAM
sockets, due to sendfile(2) supporting only the latter, there is a corner
case of AF_UNIX/SOCK_STREAM socket, that still uses records for the sake
of control data, albeit being stream socket.

Provide private version of m_clrprotoflags(), which understands PRUS_NOTREADY,
similar to m_demote().
2016-01-08 19:03:20 +00:00
Alexander V. Chernikov
a72d531f35 Do not use 'struct route_in6' inside hash6_insert().
rin6 was used only as sockaddr_in6 storage. Make rtalloc1_fib()
  use on-stack sin6 and return rtenry directly, instead of doing
  useless work with 'struct route_in6'.
2016-01-07 12:22:29 +00:00
Alexander V. Chernikov
e971a31425 Fix route lookup condition: do IPv6 route lookup for source based on
NG_NETFLOW_CONF_NOSRCLOOKUP instead of NG_NETFLOW_CONF_NODSTLOOKUP.
2016-01-04 17:25:32 +00:00
Maksim Yevmenkin
74cc817d85 - grab ng_btsocket_l2cap_sockets_mtx lock in
ng_btsocket_l2cap_process_l2ca_enc_change()
  before calling ng_btsocket_l2cap_pcb_by_cid();

- handle possible NULL value returned from
  ng_btsocket_l2cap_pcb_by_cid();

Submitted by:	Hans Petter Selasky; hps at selasky dot org
MFC after:	1 week
2015-12-23 16:32:04 +00:00
Warner Losh
f809f280e0 Create a USB_PNP_INFO and use it to export the existing PNP
tables. Some drivers needed some slight re-arrangement of declarations
to accommodate this. Change the USB pnp tables slightly to allow
better compatibility with the system by moving linux driver info from
start of each entry to the end. All other PNP tables in the system
have the per-device flags and such at the end of the elements rather
that at the beginning.

Differential Review: https://reviews.freebsd.org/D3458
2015-12-11 05:28:00 +00:00
Warner Losh
f6cea53f9d Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
block. Use it in all the PNP drivers to export either the current PNP
table. For uart, create a custom table and export it using
MODULE_PNP_INFO since it's the only one that matches on function
number.

Differential Review: https://reviews.freebsd.org/D3461
2015-12-11 05:27:56 +00:00
Alexander V. Chernikov
8ad43f2d0a Move iflladdr_event eventhandler invocation to if_setlladdr.
Suggested by:	glebius
2015-11-14 13:34:03 +00:00
Alexander V. Chernikov
b13c5b5db2 Use lladdr_event to propagate gratiotus arp.
Differential Revision:	https://reviews.freebsd.org/D4019
2015-11-09 10:11:14 +00:00
Takanori Watanabe
483ed39512 Fix encryption error handling.
Close l2cap connection on encryption error.
2015-11-07 12:15:02 +00:00
Takanori Watanabe
3a601a2381 Bluetooth LE Security Management channel support.
Add a socket option to block until underlying HCI connection encrypted.

Differential Revision:	https://reviews.freebsd.org/D3981
2015-10-27 03:42:26 +00:00
Alexander Motin
5b363c09dc Add support for PPP-Max-Payload PPPoE tag (RFC4638).
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	2 weeks
2015-09-11 09:15:27 +00:00
Mark Murray
3aa77530ca * Address review (and add a bit myself).
- Tweek man page.
 - Remove all mention of RANDOM_FORTUNA. If the system owner wants YARROW or DUMMY, they ask for it, otherwise they get FORTUNA.
 - Tidy up headers a bit.
 - Tidy up declarations a bit.
 - Make static in a couple of places where needed.
 - Move Yarrow/Fortuna SYSINIT/SYSUNINIT to randomdev.c, moving us towards a single file where the algorithm context is used.
 - Get rid of random_*_process_buffer() functions. They were only used in one place each, and are better subsumed into those places.
 - Remove *_post_read() functions as they are stubs everywhere.
 - Assert against buffer size illegalities.
 - Clean up some silly code in the randomdev_read() routine.
 - Make the harvesting more consistent.
 - Make some requested argument name changes.
 - Tidy up and clarify a few comments.
 - Make some requested comment changes.
 - Make some requested macro changes.

* NOTE: the thing calling itself a 'unit test' is not yet a proper
  unit test, but it helps me ensure things work. It may be a proper
  unit test at some time in the future, but for now please don't make
  any assumptions or hold any expectations.

Differential Revision:	https://reviews.freebsd.org/D2025
Approved by:	so (/dev/random blanket)
2015-07-12 18:14:38 +00:00
Takanori Watanabe
99043514c6 Fix rfcomm_sppd regression I could reproduced.
To reproduce it, Two machine running FreeBSD and
run
rfcomm_sppd -c 3 -S
rfcomm_sppd -a ${PEER} -c 3
on each side.
2015-07-07 15:56:51 +00:00
Mark Murray
d1b06863fb Huge cleanup of random(4) code.
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
  neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
  random(4) device in the kernel, and the KERN_ARND sysctl will
  return nothing. With RANDOM_DUMMY there will be a random(4) that
  always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
  through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
  suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
  This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
  there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
  behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
  (direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
  weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
  weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
  when the dust settles.
- Use macros for locks.
- Fix comments.

* src/share/man/...
- Update the man pages.

* src/etc/...
- The startup/shutdown work is done in D2924.

* src/UPDATING
- Add UPDATING announcement.

* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.

* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.

* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.

* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
  selection is the way to go.

* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.

* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.

* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
  that instead. All that is needed here is N=0, N++, N==0, and some
  localised trickery is used to manufacture a 128-bit 0ULLL.

* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
  now the test will do a basic check of compressibility. Clairvoyant
  talent is still a good idea.
- This is still a long way off a proper unit test.

* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
  it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])

* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
  it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
  functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.

Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
2015-06-30 17:00:45 +00:00
Jung-uk Kim
fd90e2ed54 CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head.  However, it is continuously misused as the mpsafe argument
for callout_init(9).  Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision:	https://reviews.freebsd.org/D2613
Reviewed by:	jhb
MFC after:	2 weeks
2015-05-22 17:05:21 +00:00
Craig Rodrigues
d9db52256e Move zlib.c from net to libkern.
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/

Submitted by:		Steve Kiernan stevek@juniper.net
Obtained from:		Juniper Networks, Inc.
GitHub Pull Request:	https://github.com/freebsd/freebsd/pull/28
Relnotes:		yes
2015-04-22 14:38:58 +00:00
Takanori Watanabe
d87b1182c6 Forgot to add default event mask definition. 2015-04-18 06:16:33 +00:00
Takanori Watanabe
fbc48c2bfb Initial Bluetooth LE support.
Note that sockaddr_l2cap structure is changed , check socket address
to initialize new structure member and define L2CAP_SOCKET_CHECKED
before including ng_btsocket.h

Differential Revision:        https://reviews.freebsd.org/D2021
Reviewed by:emax
2015-04-07 10:22:56 +00:00
Randall Stewart
15b1eb142c Change the callout to supply -1 to indicate we are not changing
CPU, also add protection against invalid CPU's as well as
split c_flags and c_iflags so that if a user plays with the active
flag (the one expected to be played with by callers in MPSAFE) without
a lock, it won't adversely affect the callout system by causing a corrupt
list. This also means that all callers need to use the macros and *not*
play with the falgs directly (like netgraph used to).

Differential Revision: htts://reviews.freebsd.org/D1894
Reviewed by: .. timed out but looked at by jhb, imp, adrian hselasky
             tested by hiren and netflix.
Sponsored by:	Netflix Inc.
2015-03-28 12:50:24 +00:00
Gleb Smirnoff
8d8e595eb0 Revise default limit for maximum of netgraph data items.
With modern internet speeds the limit can be reached even
on a single L2TP link.
2015-02-12 22:20:34 +00:00
Dimitry Andric
1bb25a82ab Fix a bunch of -Wcast-qual warnings in netgraph's ng_parse.c, by using
__DECONST.  No functional change.

MFC after:	3 days
2015-01-30 21:59:53 +00:00
Gleb Smirnoff
06143100da When the node receives NGM_FLOW_COOKIE update the if_link_state, instead
of playing with almost dead IFF_DRV_RUNNING flag.

Sponsored by:	Nginx, Inc.
2015-01-12 09:50:42 +00:00
Gleb Smirnoff
42c3b709c2 Remove the support for NGM_CISCO_GET_IPADDR message from ng_iface(4). The
legitimacy of removal is proved by the fact that implementation contained
a critical bug: the response allocated was sizeof(pointer), while should
had been 2*sizeof(struct ng_cisco_ipaddr).  The reason for ng_iface(4) to
support ng_cisco(4) message isn't explained anywhere, and code comes from
original Whistle import.

Sponsored by:	Nginx, Inc.
2015-01-12 09:48:45 +00:00
Robert Watson
2a8c860fe3 In order to reduce use of M_EXT outside of the mbuf allocator and
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself.  Update all callers to use the return value.

With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.

NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices.  Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.

Differential Revision:	https://reviews.freebsd.org/D1440
Reviewed by:	adrian, bz, gnn
Sponsored by:	EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
Gleb Smirnoff
cfa6009e36 In preparation of merging projects/sendfile, transform bare access to
sb_cc member of struct sockbuf to a couple of inline functions:

sbavail() and sbused()

Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-11-12 09:57:15 +00:00
Gleb Smirnoff
833e8dc5ab Remove struct arpcom. It is unused by most interface types, that allocate
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-11-07 15:14:10 +00:00
Gleb Smirnoff
dd10c1e27b NG_NODE_NAME(node) is always not NULL. Use correct macro.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov gmail.com>
2014-11-02 05:51:31 +00:00
Gleb Smirnoff
3a4c61c2fd Use macro ERROUT() to make code more laconic and follow style of other
netgraph code.

Submitted by:	Dmitry Luhtionov <dmitryluhtionov gmail.com>
2014-10-31 16:00:45 +00:00