When generated files depend on tools that need to be built for host,
we need to carefully separate them for the DIRDEPS_BUILD so we
only build them once.
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
We are modifying it after setjmp and then accessing it after the jump,
so it cannot be a local.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D40415
As popstackmark may be called on this without pushstackmark having
been called, we need to initialize it so that we don't get a bogus
comparison inside popstackmark, which would have resulted in a
NULL pointer dereference.
MFC After: 3 days
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D40413
Several makefile depend on tools built for host.
At least when using DIRDEPS_BUILD we can build these for the
pseudo machine "host" to facilitate building on older host versions.
Ideally we would build these tools in their own directories to avoid
building more than needed.
For now, setting an appropriate default for BTOOLSPATH will suffice
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39708
We cannot just compare histsizeval() against 0, since that returns
a string pointer, which is always non-zero (non-null). The logic
in sethistsize() initializes the history size to 100 with values
that are non-number, and an empty string counts as that. Therefore,
the only time we want to not write into history with HISTSIZE val
set is when it's explicitly 0.
MFC after: 2 weeks
Introduce new prompt format characters:
- '\[' starts the sequence of non-printing chatacters
- '\]' ends the sequence of non-printing characters
Within these sequences, the following characters are now supported:
- '\a' emits ASCII BEL (0x07, 007) character
- '\e' emits ASCII ESC (0x1b, 033) character
- '\r' emits ASCII CR (0x0d, 015) character
- '\n' emits ASCII CRLF sequence
These can be used to embed ANSI sequences into prompt strings.
Example in .shrc:
PS1="\[\e[7m\]\u@\h\[\e[0m\]:\w \\$ "
This tries to maintain some degree of compatibility with GNU bash,
that uses GNU readline library (which behaves slightly different from
BSD editline): It has two "non-printing boundary" characters:
- RL_PROMPT_START_IGNORE (\001)
- RL_PROMPT_END_IGNORE (\002)
while BSD editline only has one (when using EL_PROMPT_ESC setting), so
for this purpose, ASCII \001 was chosen and both \[ and \] emits
this character.
And while here, enlarge PROMPTLEN from 128 to 192 characters.
Reviewed by: jilles
Approved by: jilles
Differential Revision: https://reviews.freebsd.org/D37701
Previously when using NO_ROOT we recorded a METALOG entry for the
/.profile hard link with a different mode than the link target, which is
not permitted.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37476
This is to avoid loading .shrc which may contain commands that would
result in output different than expected.
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D35876
As per Utility Syntax Guidelines, accept both forms: -l -n and -ln.
To do that, anticipate the source string for the next option that will
be parsed by nextopt(). It's not always *argptr, sometimes it is
nextopt_optptr.
To simplify the check for not_fcnumber, slightly modify nextopt() to
always nullify nextopt_optptr in cases where it would have been set
to point to a NUL character.
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D35836
Provide libedit a special function making it always add a space after
the autocompleted command. The default one adds a slash if the word is
also a name of a directory in the current working directory, but this is
wrong for commands.
Reviewed by: bapt, jilles
Differential Revision: https://reviews.freebsd.org/D34544
Pointer arithmetic on a null pointer is undefined behavior.
The bug can be reproduced by running bin/sh/tests/builtins/wait6.0 with
UBSAN.
Reported by: Mark Millard
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34011
After an unescaped newline, there may be a here-document. Some places in
case and for did not check for one.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D32628
In single-user mode, all env vars are absent, so exptilde() would not be
able to expand ~ correctly.
Place the lines setting PATH below HOME, so exptilde() would work as
expected.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: jilles, emaste
Differential Revision: https://reviews.freebsd.org/D27003
For $reason mobaxterm default on sending unusual sequence from home/del
key, which makes libedit unabel to catch them and bind them correctly.
mobaxterm seems popular on the windows environment, so add proper
keybinding to default shrc configuration so it works out of box.
Reported by: lme
In the default configuration add 2 bindings which has been requested by
many during the HEADSUP discussion:
* csh like arrow history navigation
* ctrl-arrow to jump from word to words
Add an alias to make the history command exist as an alias to fc -l.
Add -o verify to sh to make it use O_VERIFY when
sourcing scripts and reading profiles.
Useful in conjunction with mac_veriexec to help protect at
least some parts of the boot sequence, e.g., /etc/rc*.
Differential revision: https://reviews.freebsd.org/D30464
Reviewed by: jilles, sjg
Obtained from: Stormshield
When there are many matches, find the longest common substring starting
from the beginning of each command and use that to replace input.
As an example: on my system, llv<tab> will be autocompleted to llvm-
and another <tab> will print all matching llvm commands.
Until this change, any bindings set in histedit() were lost on calls to
bindcmd().
Only bind -e and bind -v call libedit's keymacro_reset(). Currently you
cannot fool libedit/map.c:map_bind() by trying something like bind -le
as when p[0] == '-', it does a switch statement on p[1].
When multiple matches are found, we keep the provided string on the
input line and print unique matches as suggestions.
But the multiple matches might be the same command found in different
directories, so we should deduplicate the matches first and then decide
whether to autocomplete the command or not, based on the number of
unique matches.
in emacs mode ^W should delete the previous word by default
Note that upstreaming this change directly into libedit is in process.
Reported by: manu
Reviewed by: jills, pstef, manu
Differential Revision: https://reviews.freebsd.org/D29493
Move code added in b315a7296d ("autocomplete commands") to
conditionally compiled part under #ifndef NO_HISTORY.
Reported by: bdrewery
Fixes: b315a7296d
Implement persistent history storage:
the strategy is simple at start: loads the existing .sh_history file
at exit dump it.
The implementation respects the HISTFILE variable and its POSIX
definition: ~/.sh_history is used if HISTFILE is not set.
to avoid sh to create the history file, set HISTSIZE to 0 or HISTFILE to
en empty value
Co-authored-by: pstef
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D29493
In emacs mode, force ^R to backware search the history
This behaviour is the default in emacs mode for most of the other shells
Note: Note that this can still be overridden via $EDITRC, ~/.editrc or a
bind command after set -o emacs.
MFC after: 1 week
Approved by: jilles
Reviewed by: jilles, arichardson, pstef
Differential Revision: https://reviews.freebsd.org/D29494
Without this patch, sh can autocomplete file names but not commands from
$PATH. Use libedit's facility to execute custom function for autocomplete,
but yield to the library's standard autocomplete function when cursor is
not at position 0.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29361
POSIX is pretty clear that command -v, command -V and type shall write
absolute pathnames. Therefore, we need to prepend the current directory's
name to relative pathnames.
This can happen either when PATH contains a relative pathname or when the
operand contains a slash but is not an absolute pathname.
If job control is not enabled, a background job (... &) ignores SIGINT and
SIGQUIT, but this can be reverted using the trap builtin in the same shell
environment.
Using the set builtin to change options would also revert SIGINT and SIGQUIT
to their previous dispositions.
This broke due to r317298. Calling setsignal() reverts the effect of
ignoresig().
Reported by: bdrewery
MFC after: 1 week
I've always found this a little bit confusing:
> sh
$ ^D> sh
$ ^D>
Reviewed by: 0mp, jilles
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25813
