Commit Graph

54 Commits

Author SHA1 Message Date
Robert Watson
ca9f93ff42 Clean up DDP layer netatalk code:
- General style(9) cleanup -- white space, braces, line wraps, etc.

- Annotate a lack of synchronization the global route cache if the input
  routine is invoked with parallelism.

- Remove unused debugging code.
2007-01-12 15:07:51 +00:00
Robert Watson
70bff0d9b1 Break out my copyrights with our 2-clause BSD license from the UMich
copyright, which while similar, is different.

MFC after:	3 days
2007-01-08 17:58:27 +00:00
Robert Watson
8ab4b32484 Since soisdisconnected() is no longer called in pru_detach(), call it
near consumers of at_pcbdisconnect() (_close, _abort).
2006-08-05 14:14:34 +00:00
Robert Watson
a152f8a361 Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket.  pru_abort is now a
notification of close also, and no longer detaches.  pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket.  This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.

This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree().  With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.

Reviewed by:	gnn
2006-07-21 17:11:15 +00:00
Robert Watson
76666abc12 White space consistency with kasserts. Minor style tweaks.
MFC after:	3 months
2006-04-01 16:54:37 +00:00
Robert Watson
bc725eafc7 Chance protocol switch method pru_detach() so that it returns void
rather than an error.  Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.

soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF.  so_pcb is now entirely owned and
managed by the protocol code.  Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.

Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.

In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.

netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit.  In their current state they may leak
memory or panic.

MFC after:	3 months
2006-04-01 15:42:02 +00:00
Robert Watson
ac45e92ff2 Change protocol switch pru_abort() API so that it returns void rather
than an int, as an error here is not meaningful.  Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.

This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit.  This will be corrected shortly in followup
commits to these components.

MFC after:      3 months
2006-04-01 15:15:05 +00:00
Robert Watson
3c09bd01d8 In at_setsockaddr(), assert that ddp != NULL, rather than returning an
error if it's NULL, as so_pcb != NULL is now an invariant.
2006-03-25 18:54:17 +00:00
Robert Watson
2f60f02dc9 Modify netatalk to ensure, and assert, that pcb's remain attached to
sockets as long as the sockets have not been aborted or detached.  Do
not try to free the socket in pru_detach(), since sofree() will do so,
if needed, once pru_detach() returns.

Annotate a bug in ddp_abort(), which fails to free the socket; this
is probably OK as ddp_abort() should never be called, so should
instead be deleted.
2006-03-17 20:40:17 +00:00
Robert Watson
0d0549a245 Run the netatalk netisrs without Giant.
MFC after:	1 week
2005-02-18 10:53:00 +00:00
Warner Losh
ed31b82378 /* -> /*- for license, minor formatting changes, insert COPYRIGHT into files 2005-01-07 02:35:34 +00:00
Poul-Henning Kamp
756d52a195 Initialize struct pr_userreqs in new/sparse style and fill in common
default elements in net_init_domain().

This makes it possible to grep these structures and see any bogosities.
2004-11-08 14:44:54 +00:00
Robert Watson
8375a14422 Procotol control block locking for netatalk DDP. 2004-07-12 18:39:59 +00:00
Robert Watson
effb15c0c5 Remove spl's from netatalk in preparation to merge locking. 2004-07-12 04:33:58 +00:00
Robert Watson
bd1004ef9e Remove redundant call to soisdisconnected() from ddp_abort(), as it
calls at_pcbdetach() which also immediately calls soisdisconnected().
2004-05-05 03:34:37 +00:00
Robert Watson
3280e5dc69 Rename 'ddpcb' variable to 'ddpcb_list' to better distinguish it from
'struct ddpcb'.
2004-03-22 04:54:36 +00:00
Robert Watson
f2aa178725 Compare pointers with NULL rather than 0, or treating them as boolans in
if statements.

at_rmx gets a $FreeBSD$ out of the deal also (this code appears to be
unused).
2004-03-22 03:57:01 +00:00
Robert Watson
b8e3da4a83 Since I have my hands all over netatalk adding locking and restructuring
it, cinch the file's style closer to style(9) with regard to parenthesis:

  s/( /(/g
  s/ )/)/g
  s/return(/return (/g
  s/return 0/return (0)/
  s/return 1/return (1)/
2004-03-22 03:24:10 +00:00
Robert Watson
909d5c6308 Isolate PCB-specific ethertalk DDP functions in ddp_pcb.c, removing them
from ddp_usrreq.c.  Functions moved are:

  at_pcballoc()
  at_pcbconnect()
  at_pcbdetach()
  at_pcbdisconnect()
  at_pcbsetaddr()
  at_sockaddr()

Also moved are ddp_ports and ddpcb, global variables associated with DDP
pcbs.  This makes PCB implementation more parallel to inet, inet6, and
ipx.
2004-03-19 07:21:22 +00:00
Robert Watson
34f74e1ed8 Make ddp_ports static, as it's not used outside of ddp_usrreq.c.
Inspired by:	Day spent hiking to hot springs in Taiwan
Powered by:	Asia BSDCon 2004
2004-03-17 12:54:21 +00:00
Robert Watson
746e5bf09b Rename dup_sockaddr() to sodupsockaddr() for consistency with other
functions in kern_socket.c.

Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".

Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.

Submitted by:	sam
2004-03-01 03:14:23 +00:00
Robert Watson
a557af222b Introduce a MAC label reference in 'struct inpcb', which caches
the   MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols.  This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.

This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.

For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks.  Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.

Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.

Reviewed by:	sam, bms
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-11-18 00:39:07 +00:00
Sam Leffler
7902224c6b o add a flags parameter to netisr_register that is used to specify
whether or not the isr needs to hold Giant when running; Giant-less
  operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
  calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
  Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
  have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive

Supported by:	FreeBSD Foundation
2003-11-08 22:28:40 +00:00
Sam Leffler
6536168e0a must use RTFREE instead of rtfree for proper locking 2003-11-08 03:36:32 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Seigo Tanimura
4cc20ab1f0 Back out my lats commit of locking down a socket, it conflicts with hsu's work.
Requested by:	hsu
2002-05-31 11:52:35 +00:00
Seigo Tanimura
243917fe3b Lock down a socket, milestone 1.
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
  socket buffer. The mutex in the receive buffer also protects the data
  in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

  - so_count
  - so_options
  - so_linger
  - so_state

o Remove *_locked() socket APIs.  Make the following socket APIs
  touching the members above now require a locked socket:

 - sodisconnect()
 - soisconnected()
 - soisconnecting()
 - soisdisconnected()
 - soisdisconnecting()
 - sofree()
 - soref()
 - sorele()
 - sorwakeup()
 - sotryfree()
 - sowakeup()
 - sowwakeup()

Reviewed by:	alfred
2002-05-20 05:41:09 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Ian Dowse
c6cca33809 Make `options NETATALK' compile after the -fno-common changes.
Tested by:	Emiel Kollof <coolvibe@hackerheaven.org>
2002-01-16 11:26:50 +00:00
Matthew Dillon
b1e4abd246 Give struct socket structures a ref counting interface similar to
vnodes.  This will hopefully serve as a base from which we can
expand the MP code.  We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
2001-11-17 03:07:11 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
Poul-Henning Kamp
1c308b817a Change suser_xxx() to suser() where it applies. 1999-04-27 12:21:16 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Matthew Dillon
831a80b0d5 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-27 22:42:27 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Jonathan Lemon
657038ddf7 Remove dereference of uninitialized (and unused) variable. This enables
netatalk to work again.
1997-10-06 15:56:16 +00:00
Peter Wemm
f8f6cbba92 Update network code to use poll support. 1997-09-14 03:10:42 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Garrett Wollman
57bf258e3d Fix all areas of the system (or at least all those in LINT) to avoid storing
socket addresses in mbufs.  (Socket buffers are the one exception.)  A number
of kernel APIs needed to get fixed in order to make this happen.  Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead.  Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
Bruce Evans
1fd0b0588f Removed unused #includes. 1997-08-02 14:33:27 +00:00
Julian Elischer
f3b44df01d First cut at patches to make appletalk compile again
after the dissapearance of the USRREQ() entrypoint.
1997-05-13 21:01:45 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Julian Elischer
e990261c58 make the netatalk output routine matcy the prtotype used in the
protocol structure. Silences a warning from Gcc.
1997-03-05 09:17:38 +00:00