nvmecontrol tries to upload firmware in chunks as large as it thinks
the device permits. It fails to take into account the FWUG value used
by some drives to advertise the size and alignment limits for firmware
chunks.
- Use the firwmare update granularity value from the
- If the granularity is not reported or not restricted, fall back to
the previously existing logic that calculates the max transfer
size based on MDTS.
- Add firmware update granularity to the identify-controller output.
Reviewed by: imp (previous version), chuck
Obtained from: Dell EMC Isilon
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26390
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
API to the sbget() and sbput() interfaces. Specifically they take
a file descriptor pointer rather than the struct uufsd *disk pointer
used by the libufs cgread() and cgwrite() interfaces. Update fsck_ffs
to use these revised interfaces.
No functional changes intended.
Sponsored by: Netflix
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
These are similar to the existing VLAN capabilities.
Reviewed by: kib@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
I have been trying to reduce the time that testsuite runs take for CheriBSD
on QEMU (currently about 22 hours). One of the slowest tests is pfctl_test:
Just listing the available test cases currently takes 98 seconds on a
CheriBSD RISC-V system due to all the processes being spawned. This trivial
patch reduces the time to 92 seconds. The better solution would be to
rewrite the test in C/C++ which I may do as a follow-up change.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D26417
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
Properly handle the case, when some opcode keywords follow after
the `frag` opcode without additional options.
Reported by: Evgeniy Khramtsov <evgeniy at khramtsov org>
ping has the option to add the (deprecated) TOS byte
using the -z option. Adding the same option, with the
same (deprecated) Traffic Class Byte (nowadays actually
DSCP and ECN fields) to ping6 to validate proper QoS
processing in network switches.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26384
The request offset and length are always unsigned, so print them as
such.
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21388
o Enhance dependency loop logging: print full chain instead of the
last link competing the loop;
o Add -g option to generate dependency graph suitable for GraphViz
visualization, loops and other graph generation issues are highlighted
automatically;
o Add -p option that enables grouping items that can be processed in
parallel.
Submitted by: Boris Lytochkin <lytboris at gmail>
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25389
The badsys() handler for SIGSYS was added as a transtion aid for kernels
lacking sysctl() in 1993. It is unsafe and unsound so remove it rather
than running the risk of a privilege-dropping system call being silently
omitted.
This partially reverts SCCSID 6.12 (Berkeley) 03/03/93 "add code to
change the system security level".
Reviewed by: mckusick, imp, kevans
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26289
- Change the type of hw.pagesizes to OPAQUE, since it returns an array.
- Modify the handler to only truncate the returned length if the caller
supplied an output buffer. This allows use of the trick of passing a
NULL output buffer to fetch the output size, while preserving
compatibility if MAXPAGESIZES is increased.
- Add a "S,pagesize" formatter to sysctl(8).
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26239
The only output from fsck that should go to stderr is the usage message.
if setup() fails then exit with EEXIT rather than 0.
Reviewed by: mckusick
Sponsored by: Netflix
This is a follow up change to r364321 after a discussion about the style.
All near by places use extra blanks in format strings, and while use of the
format string to provide the extra blank may need more cycles than adding 1
to twidth, it generates shorter code and is clearer in the opinion of some
reviewers of the previous change.
Not objected to by: emaste
MFC after: 3 days
- Initialize the disk device fd field in connection_new().
- Close the disk device after handing the connection over
to a child worker.
- Avoid re-opening a disk device for each connection from
the same client, avoiding an fd leak.
PR: 132845
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26168
The macOS assert.h header does not define static_assert when compiling in
C99 mode. To fix this compile with -std=c11.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25928
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
We have both a system of 'kern' and of 'kernel'. Prefer the latter and
convert this notification to use 'kernel' instead of 'kern'. As a
transition period, continue to also generate the 'kern' notification
until sometime after FreeBSD 13 is branched.
MFC After: 3 days
-n omits the name of the variable regardless of the type of information that is
requested. Rephrase to clarify this point.
PR: 242191
Submitted by: stilezy@gmail.com
Approved by: emaste@
Differential Revision: https://reviews.freebsd.org/D26149
MOUNT notifies when a filesystem is mounted
REMOUNT notifies when a filesystem is mounted again
UNMOUNT notifies when a filesystem is unmounted
These events are asynchronous to the actual state of the event (though the data
is recorded at a time when it is stable). The mount event is reported after the
filesystem is mounted. However, in the interim it may be unmounted by another
agent. Likewise, umount is called just before the mountpoint is finished tearing
down. It may be remounted (or maybe if the process scheduling is wonky and devd
gets to run before the last few steps are complete).
Sponsored by: Netflix
Diffential Revision: https://reviews.freebsd.org/D25969
Amiga is a proper noun
Condition is traditionally spelled starting with 'c'
Some, but not all, of the over/under-voltage instances were hyphenated.
Since they are all adverb phrases, they all need to be hyphenated.
Pointy hat: imp
Currently, the output of `bectl list` doesn't align the 'Mountpoint' column
correctly when the 'mounted' property of a boot environment dataset is longer
than the default column width.
Set the 'Mountpoint' column width to the boot environment dataset with the
longest 'mounted' property or to the default width, whichever is greater.
PR: 241064
Reported by: vermaden@interia.pl
Reviewed by: kevans (mentor)
Approved by: kevans (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26048
The pmu(4) and adb(4) drivers on powerpc generate PMU events. Document them.
The allwinner power modules also generate these events. Document those as well.
MFC After: 3 days
Sort system type alphabetically.
Remove some commas that aren't in the devd notification messages.
MFC After: 3 days
Reviewed by: 0mp (earlier versions), jhb (useful feedback on earlier versions)
Differential Revision: https://reviews.freebsd.org/D26105
Remove PC Card specific information. It's of little value these days and on
the way out after most of its drivers have been removed.
Use iwn instead of wi device.
From the PR:
When I run `ipfw -t list` on release/12 or current, I get misaligned
output between lines that do and do not have a last match timestamp,
like so:
00100 Tue Aug 11 03:03:26 2020 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
(specifically, the "allow" and "deny" strings do not line up)
PR: 248608
Submitted by: Taylor Stearns
MFC after: 3 days
For flags and checks the order goes VHT160 and then VHT80P80 unless
checks are in reverse order ("more comes first") in which case we
deal with VHT80P80 first.
The one reverse order to pick out is where we check channel
prefernences. While it may seem that VHT160 is better, finding
two "free" channels (VHT 80+80) is more likely so we do prefer that.
While dealing with VHT160 and VHT80P80 add extra clauses previously
missing or marked TODO in a few places.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26002
The standard uses 80+80 and 80p80 but nowhere 80_80.
Switch the latter to 80P80 for all the macros and comments refering
to #defined flags which I could find.
The only place we leave as 80p80 is the ifconfig command line arguments
as we spell them all in lower case.
Ideally we would use 80+80 for any interactions with the user and
80P80 for anything internal but let us not confuse parsers and
hence avoid the '+' in either case.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26001
Rather then using magic numbers duplicate IEEE80211_FVHT_VHT* in
ifconfig (cleanup of these and other flags used and not exposed by
net80211 should happen later) and use those.
In the kernel this simplifies one ioctl path (the other one currently
relies on individual bit flags being passed in).
We also re-order the 80P80 and 160 flag for 160 to come before 80+80
and more clearly leave the flags as TODO in one of the 160/80+80 cases.
Reviewed by: adrian
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26000
