previously know by StarSemi STR9104.
Tested by the submitter on an Emprex NSD-100 board.
Submitted by: Yohanes Nugroho <yohanes at gmail.com>
Reviewed by: freebsd-arm, stas
Obtained from: //depot/projects/str91xx/...
same ASIC ID of BCM5758 such that r198318 incorecctly enabled TSO
on BCM5754.BCM5754M controllers. BCM5754/BCM5754M needs a special
firmware to enable TSO and bge(4) does not support firmware based
TSO.
Reported by: ed
Tested by: ed
was broken w.r.t. byte range lock conflicts when it was the same client
and the request used the open_to_lock_owner4 case, since lckstp->ls_clp
was not set. This patch fixes it by using "clp" instead of "lckstp->ls_clp".
MFC after: 2 weeks
checking for conflicts w.r.t. byte range locks for NFSv4.
1 - Return 0 instead of EACCES when a conflict is found, for F_GETLK.
2 - Check for "same file" when checking for a conflict.
3 - Don't check for a conflict for the F_UNLCK case.
the associated debugging under bootverbose.
- Remove freebsd4_sigreturn(); given that FreeBSD 4 didn't supported
sparc64 this only ever served as a transition aid prior to FreeBSD
5.0 and is unused by default since COMPAT_FREEBSD4 was removed from
GENERIC in r143072 nearly 5 years ago.
work.
- Sanity check the parameters passed to the implementations of the
pcib_{read,write}_config() methods. Using illegal values can cause
no real harm but it doesn't hurt to avoid unnecessary data error
traps requiring to flush and re-enable the level 1 caches.
sys/vmmeter.h: warning: shadowed declaration is here
machine/cpufunc.h: In function 'insw':
machine/cpufunc.h: warning: declaration of 'cnt' shadows a global declaration
..snip..
r195175. Remove all definitions, documentation, and usage.
fifo_misc.c:
Remove all kqueue tests as fifo_io.c performs all those that
would have remained.
Reviewed by: rwatson
MFC after: 3 weeks
X-MFC note: don't change vlan_link_state() function signature
or equial then PSOCK, not less or equial. Higher priority has lesser
numerical value.
Existing test does not allow for swapout of the thread waiting for
advisory lock, for exiting child or sleeping for timeout. On the other
hand, high-priority waiters of VFS/VM events can be swapped out.
Tested by: pho
Reviewed by: jhb
MFC after: 1 week
It's based on the newest i386's one and has the advantage of:
- ELF binary support.
- UFS2 filesystem support.
- Many FreeBSD slices support on a disk.
Tested by: SATOU Tomokazu ( tomo1770 _ maple _ ocn _ ne _ jp ),
WATANABE Kazuhiro ( CQG00620 _ nifty _ ne _ jp ) and
nyan
MFC after: 2 week
Happy New Year in Japan!!
If the NAA is type 2, the Node WWN is the Port WWN with the 12 bits
of port (48..60) cleared. This iff a wwn fetched from NVRAM is zero.
MFC after: 1 week
Unfortunately there are two slight problems with that:
- Yacc and lex might generate code that generates warnings because of
this. Require yacc and lex to be rebuilt during bootstrap. I'm not
incrementing __FreeBSD_version here, because I assume someone else
will do this eventually.
- When running `make buildkernel', it uses share/mk from the source
treeo to build aicasm. Because aicasm also depends on lex, this would
break. Lower WARNS to 5 for now. We should just increment it to 6
again somewhere in the very far future.
aliases were added or deleted. The announced route entry for
an address alias is no longer empty because this empty route
entry was causing some route daemon to fail and exit abnormally.
MFC after: 5 days
same interface. The first address will install the prefix route into
the kernel routing table and that prefix will be marked as on-link.
Without RADIX_MPATH enabled, the other address aliases of the same
prefix will update the prefix reference count but no other routes
will be installed. Consequently the prefixes associated with these
addresses would not be marked as on-link. As such, incoming packets
destined to these address aliases will fail the ND6 on-link check
on input. This patch fixes the above problem by searching the kernel
routing table and try to find an on-link prefix on the given interface.
MFC after: 5 days
IFF_POINTOPOINT link types. The reason was due to the routing
entry returned from the kernel covering the remote end is of an
interface type that does not support ARP. This patch fixes this
problem by providing a hint to the kernel routing code, which
indicates the prefix route instead of the PPP host route should
be returned to the caller. Since a host route to the local end
point is also added into the routing table, and there could be
multiple such instantiations due to multiple PPP links can be
created with the same local end IP address, this patch also fixes
the loopback route installation failure problem observed prior to
this patch. The reference count of loopback route to local end would
be either incremented or decremented. The first instantiation would
create the entry and the last removal would delete the route entry.
MFC after: 5 days
stored in a BAR since the CIS BAR is mapped before the PCI bus driver
enumerates all the BARs. Without this change, the PCI bus driver would
attempt to initialize a BAR that was already allocated resulting in a panic.
handling for the PCIR_BIOS decoding enable bit from the cardbus driver.
The PCIR_BIOS BAR does include type bits like other BARs. Instead, it is
always a 32-bit non-prefetchable memory BAR where the low bit is used as a
flag to enable decoding.
Reviewed by: imp
active.
- Fix bus_generic_rl_(alloc|release)_resource() to not attempt to fetch a
resource list for grandchild devices, but just pass those requests up to
the parent directly. This worked by accident previously, but it is
better to not let bus drivers try to operate on devices they do not
manage.
o Optimize for memory mapped I/O by making all I/O port acceses function
calls and marking the test for the IA64_BUS_SPACE_IO tag with
__predict_false(). Implement the I/O port access functions in a new
file, called bus_machdep.c.
o Change the bus_space_handle_t for memory mapped I/O to the virtual
address rather than the physical address. This eliminates the PA->VA
translation for every I/O access. The handle for I/O port access is
still the port number.
o Move inb(), outb(), inw(), outw(), inl(), outl(), and their string
variants from cpufunc.h and define them in bus.h. On ia64 these are
not CPU functions at all. In bus.h they are merely aliases for the
new I/O port access functions defined in bus_machdep.h.
o Handle the ACPI resource bug in nexus_set_resource(). There we can
do it once so that we don't have to worry about it whenever we need
to write to an I/O port that is really a memory mapped address.
The upshot of this change is that the KBI is better defined and that I/O
port access always involves a function call, allowing us to change the
actual implementation without breaking the KBI. For memory mapped I/O the
virtual address is abstracted, so that we can change the VA->PA mapping
in the kernel without causing an KBI breakage. The exception at this time
is for bus_space_map() and bus_space_unmap().
MFC after: 1 week.
