action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
IPv6 support was committed:
- Stop treating `ip' and `ipv6' as special in `proto' option as they
conflict with /etc/protocols.
- Disuse `ipv4' in `proto' option as it is corresponding to `ipv6'.
- When protocol is specified as numeric, treat it as it is even it is
41 (ipv6).
- Allow zero for protocol as it is valid number of `ip'.
Still, we cannot specify an IPv6 over an IPv4 tunnel like before such
as:
pass ipv6 from any to any
But, now, you can specify it like:
pass ip4 from any to any proto ipv6
PR: kern/89472
Reported by: Ga l Roualland <gael.roualland__at__dial.oleane.com>
MFC after: 1 week
* Correct handling of IPv6 Extension Headers.
* Add unreach6 code.
* Add logging for IPv6.
Submitted by: sysctl handling derived from patch from ume needed for ip6fw
Obtained from: is_icmp6_query and send_reject6 derived from similar
functions of netinet6,ip6fw
Reviewed by: ume, gnn; silence on ipfw@
Test setup provided by: CK Software GmbH
MFC after: 6 days
This is the last requirement before we can retire ip6fw.
Reviewed by: dwhite, brooks(earlier version)
Submitted by: dwhite (manpage)
Silence from: -ipfw
This commit replaces those with two new functions that simplify the code
and produce warnings that the syntax is deprecated. A small number of
sensible abbreviations may be explicitly added based on user feedback.
There were previously three types of strncmp use in ipfw:
- Most commonly, strncmp(av, "string", sizeof(av)) was used to allow av
to match string or any shortened form of it. I have replaced this
with a new function _substrcmp(av, "string") which returns 0 if av
is a substring of "string", but emits a warning if av is not exactly
"string".
- The next type was two instances of strncmp(av, "by", 2) which allowed
the abbreviation of bytes to "by", "byt", etc. Unfortunately, it
also supported "bykHUygh&*g&*7*ui". I added a second new function
_substrcmp2(av, "by", "bytes") which acts like the strncmp did, but
complains if the user doesn't spell out the word "bytes".
- There is also one correct use of strncmp to match "table(" which might
have another token after it without a space.
Since I changed all the lines anyway, I also fixed the treatment of
strncmp's return as a boolean in many cases. I also modified a few
strcmp cases as well to be fully consistent.
contain O_UID, O_GID and O_JAIL opcodes, the F_NOT or F_OR logical
operator bits get clobbered. Making it impossible to use the ``NOT'' or
``OR'' operators with uid, gid and jail based constraints.
The ipfw_insn instruction template contains a ``len'' element which
stores two pieces of information, the size of the instruction
(in 32-bit words) in the low 6 bits of "len" with the 2 remaining
bits to implement OR and NOT.
The current code clobbers the OR and NOT bits by initializing the
``len'' element to the size, rather than OR'ing the bits. This change
fixes this by changing the initialization of cmd->len to an OR operation
for the O_UID, O_GID and O_JAIL opcodes.
This may be a MFC candidate for RELENG_5.
Reviewed by: andre
Approved by: luigi
PR: kern/63961 (partially)
keyword but without 'logamount' limit the amount of their log messages
by net.inet.ip.fw.verbose_limit sysctl value.
RELENG_5 candidate.
PR: kern/46080
Submitted by: Dan Pelleg
MFC after: 1 week
Since the only thing truly unique about a prison is it's ID, I figured
this would be the most granular way of handling this.
This commit makes the following changes:
- Adds tokenizing and parsing for the ``jail'' command line option
to the ipfw(8) userspace utility.
- Append the ipfw opcode list with O_JAIL.
- While Iam here, add a comment informing others that if they
want to add additional opcodes, they should append them to the end
of the list to avoid ABI breakage.
- Add ``fw_prid'' to the ipfw ucred cache structure.
- When initializing ucred cache, if the process is jailed,
set fw_prid to the prison ID, otherwise set it to -1.
- Update man page to reflect these changes.
This change was a strong motivator behind the ucred caching
mechanism in ipfw.
A sample usage of this new functionality could be:
ipfw add count ip from any to any jail 2
It should be noted that because ucred based constraints
are only implemented for TCP and UDP packets, the same
applies for jail associations.
Conceptual head nod by: pjd
Reviewed by: rwatson
Approved by: bmilekic (mentor)
For incoming packets, the packet's source address is checked if it
belongs to a directly connected network. If the network is directly
connected, then the interface the packet came on in is compared to
the interface the network is connected to. When incoming interface
and directly connected interface are not the same, the packet does
not match.
Usage example:
ipfw add deny ip from any to any not antispoof in
Manpage education by: ru
o Add sanity checking to the firewall delete operation
which tells the user that a firewall rule
specification is required.
The previous behaviour was to exit without reporting any
errors to the user.
Approved by: bmilekic (mentor)
mac ipfw rules. The exact same sanity check is performed as
the first operation of add_mac(), so there is no sense
in doing it twice.
Approved by: bmilekic (mentor)
PR: bin/55981
source address of a packet exists in the routing table. The
default route is ignored because it would match everything and
render the check pointless.
This option is very useful for routers with a complete view of
the Internet (BGP) in the routing table to reject packets with
spoofed or unrouteable source addresses.
Example:
ipfw add 1000 deny ip from any to any not versrcreach
also known in Cisco-speak as:
ip verify unicast source reachable-via any
Reviewed by: luigi
rule, thus omitting the entire body.
This makes the output a lot more readable for complex rulesets
(provided, of course, you have annotated your ruleset appropriately!)
MFC after: 3 days
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
of do_cmd() broke things, because this function assumes that a socklen_t
is large enough to hold a pointer.
A real solution to this problem would be a rewrite of do_cmd() to
treat the optlen parameter consistently and not use it to carry
a pointer or integer dependent on the context.
Allow set 31 to be used for rules other than 65535.
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.
This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.
Suggested by: Paul Richards
introduced in the latest commits).
Also:
* update the 'ipfw -h' output;
* allow rules of the form "100 add allow ..." i.e. with the index first.
(requested by Paul Richards). This was an undocumented ipfw1 behaviour,
and it is left undocumented.
and minor code cleanups.
