Commit Graph

34 Commits

Author SHA1 Message Date
Matt Jacob
660fd20479 Correctly initialize free_ccbq so that if we fail to attach (as is
possible for some systems where the device is there, but the BIOS
hasn't allocated memory resources for it), we don't panic.

Submitted by:	 Gerard Roudier
2001-04-09 05:41:41 +00:00
Gerard Roudier
0a9619993d Add #if'ed support for the future option CAM_NEW_TRAN_CODE. 2001-03-24 21:11:31 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Gerard Roudier
b1bec479be Fix:
- Missing cpu_to_scr() added (endian-ness).

Improvement (fix|workaroung??):
- Blindly firing a PPR can lead to some messy situations due to
  various causes or misfeatures, for example:
  * The 53C1010-[33|66] supports offset 62 in DT mode, but only
    offset 31 in ST mode. As a result, a PPR(DT, offset 62)
    responded with PPR(ST, any offset > 31) must be rejected.
  * A device that doesn't know about PPR should reject it, but
    may also be confused by this message.
  When a PPR encounters problems, the driver now patches the goal
  transfer settings for legacy negotiations to be performed later
  with the offending target. This give a chance for bad situations
  to be fixed automagically.
2001-02-11 15:38:06 +00:00
Gerard Roudier
3c9013e257 A couple of chip errata work-arounds refined:
- When used on a 33MHz PCI BUS, the 53C1010-66 revision 0
  requires extra clocks to be inserted in data out phase.
  Revision 1 is fixed.
- The 53C1010-33 revision 1 requires internal cycles to be
  disabled due to possible contentions on IO registers.
  Revision 2 is fixed.
Fix:
- The probing of HVD from GPIO3 bit by the driver was reversed.
  The driver could misprobe the bus mode of a 825 or 875 chip
  that was not previously initialized (no BIOS for example).
2001-01-28 19:58:21 +00:00
Alexander Langer
8c529b3777 Remove unneeded include of <pci.h>
Approved by:	groudier
2000-12-07 20:58:16 +00:00
Poul-Henning Kamp
46aa3347cb Convert all users of fldoff() to offsetof(). fldoff() is bad
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.

Define __offsetof() in <machine/ansi.h>

Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>

Remove myriad of local offsetof() definitions.

Remove includes of <stddef.h> in kernel code.

NB: Kernelcode should *never* include from /usr/include !

Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.

Deprecate <struct.h> with a warning.  The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.

Paritials reviews by:   various.
Significant brucifications by:  bde
2000-10-27 11:45:49 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Gerard Roudier
aeab966bdd PR: kern/20895
PR kern/20895:
- Add FE_DAC new feature flag to distinguish between
  64 bit PCI addressing (DAC cycles) and 64 bit PCI
  interface (64 bit Memory BARs).
- Properly deal with chips that have a 32 bit PCI
  interface but support and may generate DAC.
  (Only SYM53C895A for now).

PR misc/17584 (at least partially addressed):
- Try detecting hardware combinations that trigger
  spurious PCI master parity error detections by the
  PCI chip. This work-around is implemented in the
  `snooptest' routine and consists in retrying with
  PCI master parity checking disabled if such an
  error is reported by the PCI chip during this test.

Other:
- Fix a tiny bug in WIDE negotiation that was very
  unlikely to be triggerred. The BUS width was wrongly
  compared against chip's max. offset.
2000-09-03 12:36:21 +00:00
Gerard Roudier
3b2b8a84d3 - Various comment fixes and additions.
- Add 2 explicit (paranoid?) memory barriers in the
  interrupt code (After the reading of the `flag' and
  prior to looking at the data, of course. :-) ).
- Remove obsolete informations from the README.sym file.

This commit actually results in no object difference
for IA32, but 2x`mb' added for Alpha.
2000-07-02 21:26:50 +00:00
Gerard Roudier
2096333bc2 - Fix a harmless compilation warning on Alpha.
(Reported by Matthew Jacob)
- Fix a couple of __inline__ (changed to __inline).
- Check also against DT_DATA_IN phase on parity/crc error.
  (Merged from Pamela Delaney's changes in the Linux driver)
- Fix support for phase mismatch handling from the C code for
  the C1010 (only useful for testing issue).
- Add an asynchonous notification handler for `lost device'
  (AC_LOST).
2000-06-26 21:09:45 +00:00
Gerard Roudier
e19c49c532 Fix a problem of user settings from TEKRAM NVRAM
layout introduced in driver 1.5.3. The driver was
confused by the bogus TEKRAM table used to translate
user sync. setting to SCSI sync. factor.
Btw, the new TEKRAM DC-390 U3D and U3W Ultra-160
controllers seem to be using BIOS from SYMBIOS/LSI
and thus SYMBIOS NVRAM layout.
If that means that TEKRAM will now offer real
SYMBIOS software compatible SCSI controllers, then
it is a *GREAT NEWS*.
2000-06-13 20:17:41 +00:00
Gerard Roudier
ec8146d60d - Use `bus space' primitives for IO and MMIO instead
of IO/MMIO legacy methods.
- Prepare the driver for big endian CPU support.
- Clarify memory and IO barriers needed by the driver.
2000-06-08 19:48:16 +00:00
Gerard Roudier
94d057fdf4 - Make the NVRAM debug code compile and work.
- Get rid of a fiew uselessly `long' variables
  and casts to `long'.
- Estimate the PCI clock for all chips, except
  C1010 for now (we should do that for each PCI BUS)
- Refine a couple of C1010 errata work-arounds.
- For now, make sure AIP generation is disabled
  for the C1010-66.
2000-05-28 17:49:18 +00:00
Gerard Roudier
4fafb9d657 Work-around a couple of C1010 quirks:
- Reload SCNTL3 after selection from host   (C1010-33).
- Reload SCNTL4 prior to any DATA OUT phase (C1010-66).
- Use max SCSI offset 31 for ST but 62 for DT.
2000-05-07 09:54:33 +00:00
Peter Wemm
10f9bc7f43 Add missing $FreeBSD$ 2000-05-01 19:54:26 +00:00
Gerard Roudier
79c3f400b1 Phase mismatch handling from SCRIPTS had been
broken by previous patch.
2000-04-30 21:42:55 +00:00
Gerard Roudier
c5595f9dd0 This new version adds support for early NCR chips.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE instructions for these chips.

2 SCRIPTS sets (firmwares) numbered #1 and #2 are
used for the whole support of the 53C8XX family
to get possible:

- FW #1 : Only based on MEMORY MOVE instructions.
          Selected for 810, 815, 825.
- FW #2 : LOAD/STORE based. This is the firmware
          also used by previous driver versions.
          Selected for other chips.

When both `ncr' and `sym' are configured, `sym'
will now attach all the 53C8XX devices by default.
Previous balancing between `ncr' and `sym' can be
preserved by:

- Either editing sym_conf.h and commenting the
  following compile option:
     #define SYM_CONF_GENERIC_SUPPORT
  (This also saves about 3.5Kb of kernel memory).

- Or setting kernel config option
    SYM_SETUP_LP_PROBE_MAP to 64 (bit 0x40)
2000-04-29 10:20:16 +00:00
Poul-Henning Kamp
ed6aff7387 Remove unneeded <sys/buf.h> includes.
Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.
2000-04-18 15:15:39 +00:00
Gerard Roudier
18dfcb3d0e Second patch that prepares for the addition of the
multi-firmware support. This patch just changes
numerous names in the driver sources and is actually
nilpotent. This has been checked by comparing the
generated assembly code.

The names that have been changed are related to the
script names. They were named `script' and `script H'.
They are now named respectively `script A' and
`script B'.
2000-04-16 20:05:36 +00:00
Gerard Roudier
454af27b5c First patch that prepares for the adding of multi-firmware
support. Changes are rather simplifications of the SCRIPTS
interface (prior to complexifying it again;) ), dead code
removes and comment fixes.

Code removed:
- Handling of kernel variables referenced from SCRIPTS.
- Handling of selection without ATN.

Slightly rewritten:
- Handling of illegal phase (4/5) and data overrun conditions.

Simplifications:
- Extended error flag and bits now only set from the C code.
- Move the extended error status (xerr_status) and nego
  status (nego_status) outside the data structure accessed
  by SCRIPTS (struct dsb).
- Get rid of the script status field (scr_st).
- Only patch SCR_NO_OP SCRIPTS instructions to adapt SCRIPTS
  to actual chip capabilities.

Cosmetic changes:
- Miscellaneous comments in SCRIPTS.
- FreeBSD_4_Bus define replaced by FreeBSD_Bus_Io_Abstraction.
2000-04-15 10:54:58 +00:00
Gerard Roudier
45b318264e This new driver version uses the DMA mapping interface
introduced in FreeBSD-4.0. The driver is now full up-to-date
with regards to the current kernel interfaces.

Another significant change in this driver version applies
to the checking of the data direction. The driver is now
able to check against the expected data direction in any
circumstance and will not hang either if direction is wrong
at the start of the IO, or if for some weird reason,
the device changes to the wrong direction during the IO.

This driver version is still usable under FreeBSD 3.2/3.3,
since it only requires CAM, other kernel interface dependencies
being #if'ed in the sources according to kernel version.
But, in order to use the driver under those early kernel
versions, user has to move the driver sources by hand and make
appropriate tiny changes to let the kernel know about the driver.

Other changes:
- Remove the debugging stuff for WSR bit.
- Get rid of some warnings about volatile being discarded.
2000-04-02 10:07:54 +00:00
Gerard Roudier
7a35ada03e Simplifications:
- Remove all the code intended to deal with experimental
  C1010 revisions. This code got useless due to commercial
  chip revisions having been fixed.
Fixes:
- Rewrite/rework the WSR condition handling.
  Previous drivers snooped on the BUS through the SBDL IO
  register and this has been discovered to trigger a spurious
  SCSI parity error when WSR had been set by chip and cleared
  by SCRIPTS prior to reading SBDL bit [0...7].
  On the other hand, the C1010 does not use the SWIDE register
  when synchronous data transfers are taking place and
  requires a CHMOV (1) WHEN DATA_IN to be performed in order
  to move to memory the residual byte when WSR is set and
  the residual byte is useful data.
  BTW, the new WSR handling by the driver is simpler.
- No longer attempt to read from SCRIPTS the SBDL register.
  This is intended to avoid to be victimized again by any other
  issue regarding the handling of this register by 8xx chips.
Miscellaneous:
- The driver is now able to handle the WSR + IGN RESIDUE
  condition at the end of a DATA IN I/O without need of a
  programmed interrupt. It is a minor? optimization.
- A few other minor cosmetic changes.

This driver version fixes notably a permanent SCSI parity
error condition at boot that can be triggerred due to recent
changes in cam_xpt.c between 1.79 and 1.80.
Changes in CAM/XPT are fine, but the new handling of the full
INQUIRY may trigger the driver problem when a target returned
an odd value in the `additionnal length' field of the INQUIRY
response.

The diff against previous driver version is large, but it
consists approximatively in:
- 350 lignes removed and not compiled in previous drivers
  (They addressed experimental C1010 revisions)
- 250 lignes added or changed, half being comments or empty
  lines.
So, in fact, the real changes are about 120 lines of source.
About 80 lines address SCRIPTS changes and about 40 lines
address C code changes.

Approved by: jkh

New WSR handling reviewed by Pamela Delaney <pam.delaney@lsil.com>
(For back-porting to Linux sym53c8xx driver 1.6x series)
2000-02-13 12:14:07 +00:00
Gerard Roudier
b5727bb5f0 - Fix an issue that paniced the machine in data overrun
condition.
- 1 line change that allows to balance chips between ncr
  and sym using pci compat option (not compiled by default
  in 4.0 but maintains the driver source 3.4 compatible).
2000-01-28 20:11:32 +00:00
Gerard Roudier
6f9e728a48 - Add year 2000 copyright to driver files.
- Set MAX_OFFS driver compile option to 63 (was 64 which is wrong).
  - Fix a typo in the SYMBIOS NVRAM layout structure and add field and
    bit definition for the support of PIM_NOBUSRESET.
  - Report to XPT PIM_NOBUSRESET and PIM_SCANHILO if set by user in NVRAM.
  - Negotiate SYNC immediately after WIDE response from the target as
    suggested by Justin Gibbs.
  - Remove some misleading comment about CmdQue handling by CAM.
  - Apply correctly the MAX_WIDE and MAX_OFFS driver options.
2000-01-08 19:58:17 +00:00
Gerard Roudier
a6fa47ec0d - Add device entry for the next generation of C1010 device
(pci dev_id 0x21).
- Start the SCRIPTS processor without resetting the SCSI BUS
  at initialization.
- Remove the "Host adapter CCB chain" (got useless given the
  new queuing scheme).
- Display correctly the state of SCSI signals, when SCSI BUS
  looks bad.
- Cosmetic changes in messages printed out at initialization.
- Notifications and messages on RESET conditions slightly
  reworked.
- TEKRAM 24C16 NVRAM support fixed (also reported ok).
2000-01-01 15:24:44 +00:00
David E. O'Brien
4d129adce5 Go ahead and take these off the vendor branch as Gerard Roudier is now
a committer and will be maintaining these in the usual manner.

Add $FreeBSD$'s to get them off on the right foot.
1999-12-30 06:19:10 +00:00
David E. O'Brien
f7c17b70a8 * The C1010 stepping B0 (Rev 1) tested OK for DT transfers without the U3EN
broken bit work-around enabled.
* Fixed a bug that made MDP not work. (However, MDP is actually not tested
  due to lack of hardware using this feature).
* Chip table changed to support the C1010 B0 w/o the U3EN bit work-around
  enabled.
* Add the SYM_SETUP_MAX_LUN, SYM_SETUP_LP_PROBE_MAP (used to tell the
  driver about chips that are to be claimed with lower priority than old
  PCI bus based driver (typically the ncr)), SYM_SETUP_SCSI_DIFF, and
  SYM_SETUP_PCI_PARITY options.

Submitted by:	Gerard Roudier <groudier@club-internet.fr>
1999-12-16 17:00:53 +00:00
David E. O'Brien
8fac250d9e Update to the 0.12.0-19991127 patch + my header path & doc changes. 1999-11-28 01:35:29 +00:00
David E. O'Brien
8d2e981009 Adjust sym' include file path to match where sym' landed in our tree.
Done as vendor import as I hope the author will accept this patch, and
I'm not ready to take this thing off the vendor branch yet.
1999-11-28 00:45:27 +00:00
David E. O'Brien
ec9612e79e Adjust sym' include file path to match where sym' landed in our tree.
Done as vendor import as I hope the author will accept this patch, and
I'm not ready to take this thing off the vendor branch yet.
1999-11-28 00:39:09 +00:00
David E. O'Brien
b24c086a80 Update to the SYM-0.11.0-19991120 patch.
Submitted by:	Gerard Roudier <groudier@club-internet.fr>
1999-11-27 23:37:15 +00:00
David E. O'Brien
da0e9bf6b5 Update to the SYM-0.10.0-19991111 patch.
Submitted by:	Gerard Roudier <groudier@club-internet.fr>
1999-11-27 23:35:46 +00:00
David E. O'Brien
c19e61b2f2 New `sym' device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010
PCI SCSI controllers.  This driver also supports the following Symbios/LSI
PCI SCSI chips: 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895.

However, it does NOT support earlier chips as the following ones: 53C810,
53C815, 53C825.

See README.sym for more details.

Submitted-by:	Gerard Roudier <groudier@club-internet.fr>
1999-11-27 23:32:35 +00:00