Commit Graph

237 Commits

Author SHA1 Message Date
Andrew Turner
1161298251 Create a common set_stackptrs in sys/arm/machdep.c.
On single core devices set_stackptrs is only ever called with cpu = 0 in
initarm and will be identical to the existing function. On SMP this needs
to be implemented for sys/arm/mp_machdep.c, but the implementations are
identical for each SoC.
2012-09-22 06:41:56 +00:00
Andrew Turner
19a0f7f9cb Set machine correctly on ARM. This allows universe to use the correct world
when building each kernel.

Reviewed by:	imp
2012-08-18 05:48:19 +00:00
Rui Paulo
8c09f7b626 The GPIO drivers were initialising their mutexes with type of
MTX_NETWORK_LOCK. This is wrong since these mutexes have nothing to do
with networking.
2012-08-17 04:44:57 +00:00
Oleksandr Tymoshenko
cf1a573f04 Merging projects/armv6, part 1
Cummulative patch of changes that are not vendor-specific:
	- ARMv6 and ARMv7 architecture support
	- ARM SMP support
	- VFP/Neon support
	- ARM Generic Interrupt Controller driver
	- Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
Oleksandr Tymoshenko
86bce74937 Move unmask IRQ function call up to nexus device level.
FDT-enabled targets were broken after r238043 that relies
on device up the hierarchy to properly setup interrupt.
nexus device for ARM platforms did job only partially:
setting handler but not unmasking interrupt. Unmasking
was performed by platform code.

Reviewed by:	andrew@
2012-07-17 03:18:12 +00:00
Warner Losh
378d88b3dc Remove some unused variables/externs that have been copied too many times... 2012-07-10 01:49:50 +00:00
Warner Losh
fcdf8255c5 Not quite ready for this yet, so comment it out. 2012-07-10 01:32:52 +00:00
Warner Losh
53edbb2cfe All xscale ports are armeb, so mark it here. This should reduce universe
times a little.
2012-06-29 04:13:31 +00:00
Warner Losh
56c9c68603 Fix missing straggler for the move to parse_boot_param() 2012-06-14 18:37:00 +00:00
Warner Losh
3590dad094 More Linux boot support. Create arm_dump_avail_init() to initialize
this array either from Linux boot data, when enabled, or in the
typical way that most ports do it.  arm_pyhs_avail_init is coming
soon since it must be a separate function.
2012-06-14 04:18:56 +00:00
Warner Losh
d39655d7a4 Modify all the arm platform files to call parse_boot_param passing in
the boot parameters from initarm first thing.  parse_boot_param parses
the boot arguments and converts them to the /boot/loader metadata the
rest of the kernel uses.  parse_boot_param is a weak alias to
fake_preload_metadata, which all the platforms use now, but may become
more extensive in the future.

Since it is a weak symbol, specific boards may define their own
parse_boot_param to interface to custom boot loaders.

Reviewed by:	cognet@, Ian Lapore
2012-06-14 04:00:30 +00:00
Warner Losh
8cfede30f9 Remove leakage of other patches into last commit. 2012-06-13 16:12:30 +00:00
Warner Losh
a698b62cf5 trim trailing spaces that have accumulated over the years (these files
served as the basis for too many other platforms).
2012-06-13 04:38:09 +00:00
Andrew Turner
16072bc718 Remove an unneeded increment from initarm. The variable is uninitialised,
is not used in this part of the function and correctly initialised later
when it is used.
2012-06-10 10:40:22 +00:00
Andrew Turner
4ea15b8776 Pull out the common code to initialise proc0 & thread0 from initarm to a
common function.

Reviewed by:	imp
2012-06-10 01:13:04 +00:00
Warner Losh
4623180919 Minor rearrangement of the locore <-> initarm interface. Pass in a
structure with the first 4 registers to allow a wider range of boot
loaders to work.  Future commits will make use of this to centralize
support for the different loaders.
2012-06-03 18:34:32 +00:00
Warner Losh
9e77ef2a9b Remove obsolte big endian flag. It is no longer needed. 2012-05-11 14:51:59 +00:00
Stanislav Sedov
208cf1fbc3 - Add new ARM kernel option QEMU_WORKAROUNDS which can be
used in the code which needs to implement some specific
  behaviour when being run under QEMU.
- Make PXA UART probe code to work under QEMU gumstix, which
  doesn't emulate all the ports properly.
2012-04-07 23:47:08 +00:00
Olivier Houchard
0d43a18d50 Make sure we do not provide the page 0 to the VM. It can't handle it properly,
because pmap_extract() returns 0 when there's no mapping.

PR:		arm/154227
MFC after:	1 week
2012-02-29 12:44:34 +00:00
Marius Strobl
7ccccd843a Fix header pollution, possibly unbreaking the build of cfi_bus_ixp4xx.c
as part of cfi.ko.
2011-12-31 15:53:34 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Hans Petter Selasky
11bcf702f4 Move the device_delete_all_children() function from usb_util.c
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().

MFC after:	1 week
2011-11-19 10:11:50 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Kevin Lo
a32376dd76 Check the return value of BUS_SETUP_INTR()
Reviewed by:	imp
2011-10-27 10:21:40 +00:00
Andrew Thompson
3cd6db794c Name these gpio pins better, they are on an external PLD and not the same as
the cpu wired gpio.
2011-10-12 20:58:54 +00:00
Andrew Thompson
bbdb7f2f2e Dont just set the pin high when turning on output, use the current value. Also
let this value be set when in input mode.
2011-10-12 20:57:21 +00:00
Andrew Thompson
870af4c67b Add missing newbus glue, this has never attached properly to gpiobus. 2011-10-05 08:33:50 +00:00
Sergey Kandaurov
82e6655288 Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.

Reviewed by:	cognet
MFC after:	1 week
2011-04-19 15:05:12 +00:00
David E. O'Brien
6b4b73920f Add a real dependency on the microcode.
Now when one does 'make kernel ; make kernel' the second invocation
only does:  `kernel.ko' is up to date.
rather than reproduce all the binary microcode files and relink the kernel.
[continuation of r212429]
2011-02-25 09:07:17 +00:00
Olivier Houchard
3e9a516ed4 Get myself a brain, move the call to init_param1() before the first use in
at91_machdep.c, and do it for the files I forgot the first time

Reported by:	andrew
Submitted by:	pluknet
2011-02-21 13:11:05 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Olivier Houchard
e9e1639ac0 Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.
2011-02-13 20:02:46 +00:00
Sergey Kandaurov
4053b05b91 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
Warner Losh
72497ecf7e IXP4XX_GPIO_{,UN}LOCK() don't take args. Remove the sc here to make
this compile again.
2010-12-23 19:28:50 +00:00
Andrew Thompson
a0ba8fd51c Provide a mutex around the read/modify/write of the IXP425_GPIO_*
registers. Giant was used in some places, but not all.
2010-11-14 20:41:22 +00:00
Andrew Thompson
54873b4cd6 Add a GPIO driver for the Gateworks Cambria platform.
The external gpio pins are connected to a PLD on the i2c bus, unfortunatley
this device does not conform by failing to send an ack after each byte written.
The iicbb driver will abort the transfer when the address is not ack'd and it
would introduce a lot of churn to be able to pass a flag down to
iicbb_start/iicbb_write. Instead we do bad things by grabbing the iicbus but
then doing our own bit banging.
2010-11-11 20:18:33 +00:00
Rebecca Cran
b1ce21c6ef Fix typos.
PR:	bin/148894
Submitted by:	olgeni
2010-11-09 10:59:09 +00:00
Andrew Thompson
0b773cbb23 Remove line for the uncommitted Cambria gpio drive that snuck in with r214946. 2010-11-07 20:38:14 +00:00
Andrew Thompson
cefd33c787 Hook up the five gpio pins on the Avila board to the gpio framework. There are
actually 16 I/O lines but the other ones are used for system devices and
interrupts.

The IXP4XX platform can set interrupts on these pins for
high/low/rising/falling/transitional but this is not implemented yet.

The Cambria has the same interface but as all the pins are assigned to system
functions the gpio header is toggled via a PLD on the i2c bus and is not
supported by this commit.
2010-11-07 20:33:39 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Andriy Gapon
3d844eddb7 bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to:	r212213
MFC after:	10 days
2010-09-10 11:19:03 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Rui Paulo
c0873717d4 Pass the correct pointer to fled_cb(). 2010-03-26 18:49:43 +00:00
Rui Paulo
4cd0801096 Fix previous commit: led_func() doesn't exist, it should be fled_cb().
Pointed out by:	bz
2010-02-22 14:49:52 +00:00
Rui Paulo
fb023b5a3c Turn on the front LED at boot time like we do with the Avila. 2010-02-10 11:40:18 +00:00
Rui Paulo
0ce207d2af Intel XScale hwpmc(4) support.
This brings hwpmc(4) support for 2nd and 3rd generation XScale cores.
Right now it's enabled by default to make sure we test this a bit.
When the time comes it can be disabled by default.
Tested on Gateworks boards.

A man page is coming.

Obtained from:	//depot/user/rpaulo/xscalepmc/...
2009-12-23 23:16:54 +00:00
Rui Paulo
bba017d6a0 Remove remaining bits of performance counter support.
Submitted by:	Tom Judge <tom at tomjudge.com>
2009-10-03 13:59:15 +00:00
Rui Paulo
f143a35bf1 Remove performance counter headers. This code came from NetBSD, but our
hardware perf. counter support is different, so we don't need these
files.

Reviewed by:	freebsd-arm (no comments)
2009-10-02 11:10:05 +00:00