In preparation for clone3 system call add struct clone_args and use it in
clone implementation.
Move all of clone related bits to the newly created linux_fork.h header.
Differential revision: https://reviews.freebsd.org/D31474
MFC after: 2 weeks
At least Linux x86 ABI's does not use carry bit and expects that the dx register
is preserved. For this add a new sv_set_fork_retval hook and call it from cpu_fork().
Add a short comment about touching dx in x86_set_fork_retval(), for more details
see phab comments from kib@ and imp@.
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D31472
MFC after: 2 weeks
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
On amd64 XENHVM depends on the xentimer device for PVH early startup,
so both should be added or removed together (like the current
dependency with xenpci). Fix this by adding xentimer to NOTES and
updating the comments on the config files. Note that on i386 there's
no such dependency between xentimer and XENHVM, since there's no PVH
support.
While there also fix the MINIMAL i386 build to include the xentimer,
so it keeps the same functionality as before xentimer was split from
XENHVM.
Reported by: lwhsu
PR: 257549
Fixes: ae59812748 ('xen/timer: make xen timer optional')
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
There is no reason now why do we need to allocate trampoline page very
early in the boot process. The only requirement for the page is that
it is below 1M to be usable by the real mode during init. This can be
handled by vm_alloc_contig() when we do the startup.
Also assert that startup trampoline fits into single page. In principle
we can do multi-page allocation if needed, but it is not.
Move the alloc_ap_trampoline() function and the boot_address variable to
i386/mp_machdep.c. Keep existing mechanism of early alloc on i386.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31343
gcc failed as it didn't inlined the builtins and generates calls to
the libgcc, ld can't find libgcc as cross-toolchain libgcc is not installed.
To avoid this add internal vDSO ffs functions without optimized builtins.
Reported by: jhb
MFC after: 2 weeks
The timer is not used on ARM.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29041
Initial patch from submitter was adapted by me to prevent unconditional
FUTEX_REQUEUE use.
PR: 255947
Submitted by: Philippe Michaud-Boudreault
Differential Revision: https://reviews.freebsd.org/D30332
The vDSO initialisation order should be as follows:
- native abi init via exec_sysvec_init();
- vDSO symbols queued to the linux_vdso_syms list;
- linux_vdso_install();
- linux_exec_sysvec_init();
As the exec_sysvec_init() called with SI_ORDER_ANY (last) at SI_SUB_EXEC
order, move linux_vdso_install() and linux_exec_sysvec_init() to the
SI_SUB_EXEC+1 order.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D30902
MFC after 2 weeks
In order to reduce diff between arches constify vdso install/deinstall
functions like arm64.
Reviewed by: emaste
Differential revision: https://reviews.freebsd.org/D30901
MFC after: 2 weeks
The vDSO (virtual dynamic shared object) is a small shared library that the
kernel maps R/O into the address space of all Linux processes on image
activation. The vDSO is a fully formed ELF image, shared by all processes
with the same ABI, has no process private data.
The primary purpose of the vDSO:
- non-executable stack, signal trampolines not copied to the stack;
- signal trampolines unwind, mandatory for the NPTL;
- to avoid contex-switch overhead frequently used system calls can be
implemented in the vDSO: for now gettimeofday, clock_gettime.
The first two have been implemented, so add the implementation of system
calls.
System calls implemenation based on a native timekeeping code with some
limitations:
- ifunc can't be used, as vDSO r/o mapped to the process VA and rtld
can't relocate symbols;
- reading HPET memory is not implemented for now (TODO).
In case on any error vDSO system calls fallback to the kernel system
calls. For unimplemented vDSO system calls added prototypes which call
corresponding kernel system call.
Tested by: trasz (arm64)
Differential revision: https://reviews.freebsd.org/D30900
MFC after: 2 weeks
Temporary add stubs to the Linux emulation layer which calls the existing hook.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D30911
MFC after: 2 weeks
The underlying types for both are the same so arguably this doesn't
really matter, but using the wrong type is still confusing and
technically incorrect.
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
amd64 and 32-bit ARM already had assertions to this effect. Add them to
other pmaps.
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31171
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
Use sysentvec hooks to only call umtx_thread_exit/umtx_exec, which handle
robust mutexes, for native FreeBSD ABI. Similarly, there is no sense
in calling sigfastblock_clear() for non-native ABIs.
Requested by: dchagin
Reviewed by: dchagin, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
This adds `sv_elf_core_osabi`, `sv_elf_core_abi_vendor`,
and `sv_elf_core_prepare_notes` fields to `struct sysentvec`,
and modifies imgact_elf.c to make use of them instead
of hardcoding FreeBSD-specific values. It also updates all
of the ABI definitions to preserve current behaviour.
This makes it possible to implement non-native ELF coredump
support without unnecessary code duplication. It will be used
for Linux coredumps.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30921
In Linux vDSO is a small shared ELF library, so it is not intended
for aout binaries. This was added on 64-bit Linuxulator import by mistake.
MFC after: 2 weeks
Assuming we can't run on i486, i586 class cpu, retire linux_kplatform var
and use hardcoded 'machine' value in linux_newuname().
I have added linux_kplatform for consistency with linux_platform which is
placed in to vdso to avoid excess copyout it on stack for AT_PLATFORM at
exec time.
This is the first stage of Linuxulator's vdso revision.
Reviewed by: trasz, imp
Differential Revision: https://reviews.freebsd.org/D30774
MFC after: 2 weeks
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
For now the Linux emulation layer uses in kernel ppoll(2) without
conversion of user supplied fd 'events', and does not convert the
kernel supplied fd 'revents'.
At least POLLRDHUP is handled by FreeBSD differently than by
Linux. Seems that Linux silencly ignores POLLRDHUP on non socket fd's
unlike FreeBSD, which does more strictly check and fails.
Rework the Linux ppoll, using kern_poll and converting 'events'
and 'revents' values.
While here, move poll events defines to the MI part of code as they
mostly identical on all arches except arm.
Differential Revision: https://reviews.freebsd.org/D30716
MFC after: 2 weeks
Require queueing of the signals with default action, and disable
dequeueing SIGCHLD on wait for live process.
Reported and tested by: dchagin
Reviewed by: dchagin, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30675
