Commit Graph

658 Commits

Author SHA1 Message Date
Orion Hodson
4f3204ef22 Fix lock order reversal when opening device and chn_reset fails.
Submitted by: Jan-Espen Pettersen <sigsegv@leakingmemory.org>
Tested by: Georg Funk <georgfunk@web.de>
2003-05-01 16:31:21 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
John Baldwin
6faa2f6d6e Comment out the mixer entry for igain for the mic 20dB boost for now since
it can cause feedback problems on some laptops.

Reviewed by:	orion
2003-04-23 16:49:53 +00:00
Orion Hodson
61a0da1de5 Add eMicro codec ids. 2003-04-21 04:48:40 +00:00
Orion Hodson
96524a52b6 Use SOUND_MIXER_IGAIN to toggle 20dB mic boost for want of a better
place for it.

Assorted comments.

Submitted by: luigi
2003-04-21 03:47:28 +00:00
Orion Hodson
6635978f23 Additional malloc failure checks. 2003-04-20 17:08:56 +00:00
David E. O'Brien
82d4d32d65 more style(9) changes. 2003-04-20 09:07:14 +00:00
David E. O'Brien
e3da61d733 more style(9) changes. 2003-04-20 08:37:29 +00:00
David E. O'Brien
ee1ca8b7f5 A few style(9) fixes. 2003-04-20 07:43:09 +00:00
David E. O'Brien
aca6bb0d8c Sync with Creative's 8010.h rev 1.39. 2003-04-18 04:13:38 +00:00
Orion Hodson
5a289baba9 Perform warm or cold reset AC97 per the spec depending on state of the
codec during initialization.  This code mirrors the reset code used on
the VIA82c686 and fixes a codec initialization failure (SoundMAX
AD1885) reported by Matthias Schuendehuette.
2003-04-17 15:04:11 +00:00
Hidetoshi Shimokawa
30eaffaf6c Fix bogus maxsegsz parameter for bus_dma_tag_create().
MFC: 1 week
2003-04-16 05:03:35 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Orion Hodson
ba548c643a Additional codec ids. 2003-04-04 07:37:25 +00:00
Orion Hodson
538b04e4ad Fix mismatch between bus address stored for buffer descriptors and
actual address of buffer descriptor.  This should fix the reported
calibration failures and subsequent speed problems with ich chipsets.

Minor calibration comment updates.
2003-04-04 07:15:19 +00:00
Orion Hodson
6084370fe4 Perform warm reset if codec reports ready on attach.
Move AC97 link control power up poke so it is always performed on attach.
2003-03-28 16:33:15 +00:00
Orion Hodson
abe88fc972 Re-work ac97 initialization to match cold reset described in AC97r.23
and be prepared to wait much longer for codec to become ready.

Credit to Hugo D. Valentim <hvalentim@gmx.net> for reporting the
problem, providing useful pointers, and repeated diff testing.
2003-03-26 06:11:36 +00:00
Orion Hodson
8f832fd0ba For the VIA8233A use multi-sgd register set for primary playback
channel and disable DXS3.  Several users have reported DXS3 as playing
at half speed on the 8233A revision of the chipset.  This implicitly
means no SPDIF for VIA8233A users.
2003-03-26 05:51:13 +00:00
Orion Hodson
78a248c1db Add defines for low power and second codec ready. 2003-03-26 05:35:38 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Orion Hodson
600f6cbaa2 Distinguish between register sets that depend on ac97 caps (wr0, wr1,
msgd) and those that don't (dxs0-3) when reporting format caps.
2003-03-20 20:07:18 +00:00
Orion Hodson
9963235abc Correct vendor id for ALC101. 2003-03-20 18:17:39 +00:00
Orion Hodson
b2a0f525e6 Correct CS4205 base vendor id.
Reported by:    Christophe Juniet and Mark Santcroos.
2003-03-12 15:11:25 +00:00
Orion Hodson
a7576e2e4b Back out last commit, which is fine in theory, but ignores the fact
that a lock is held whilst the allocations are made (M_WAITOK -> M_NOWAIT).
2003-03-05 14:48:28 +00:00
Orion Hodson
876d09d890 Attempt a hard reset if AC97 codec is not ready on attach.
Halt attach if mixer_init fails.

Prompted by: points raised by Hugo Valentim <hvalentim@gmx.net>.
2003-03-05 05:56:18 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Orion Hodson
19921b23b5 o Move vendor ids into separate table.
o Add assorted vendor and codec ids.
2003-02-28 18:04:52 +00:00
Scott Long
4bc7efe837 Add the ID for the CS4205 codec found in Dell laptops. Obtained from
the CS4205 spec.
2003-02-27 03:51:43 +00:00
Olivier Houchard
7ee68e82e7 Add SigmaTel STAC9750 entry.
Submitted by:	Paulius Bulotas <paulius.bulotas@microlink.lt>
2003-02-26 18:39:04 +00:00
Olivier Houchard
33673595a6 Unbreak emu10k1 by properly using the buffer address.
New contestant for the lamest commit of the year award:	cognet
2003-02-26 16:11:18 +00:00
Orion Hodson
a4273e83bc Replicate OSS behaviour when rate settings fails.
PR:	kern/26563
2003-02-26 14:38:19 +00:00
Maxime Henrion
07159f9c56 Cleanup of the d_mmap_t interface.
- Get rid of the useless atop() / pmap_phys_address() detour.  The
  device mmap handlers must now give back the physical address
  without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
  int.  Now we properly pass a vm_offset_t * and expect it to be
  filled by the mmap handler when the mapping was successful.  The
  mmap handler must now return 0 when successful, any other value
  is considered as an error.  Previously, returning -1 was the only
  way to fail.  This change thus accidentally fixes some devices
  which were bogusly returning errno constants which would have been
  considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
  no longer used.
- Convert all the d_mmap_t consumers to the new API.

I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.

Discussed with:		alc, phk, jake
Reviewed by:		peter
Compile-tested on:	LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on:	i386
2003-02-25 03:21:22 +00:00
Brian Feldman
3fbe138ca9 It seems that sound(4)'s feeder routines don't need to allocate memory
without waiting, since they are called from a system-call context only.
This appears to fix all sorts of problems with open("/dev/dsp", O_WRONLY)
randomly returning ENXIO.

Found by:	cognet
2003-02-23 20:49:45 +00:00
Orion Hodson
148f84cf1e Fix compilation on alpha. Pointy hat to Marcel. 2003-02-23 01:06:58 +00:00
Orion Hodson
c7bbf97e00 o Add back support for DXS channels.
o Make DXS3 the primary playback channel.  It may be the only
universally supported channel with the assorted revisions of this
chipset.

o Add sysctl and handler for enabling s/pdif output from DXS3.
2003-02-22 23:28:15 +00:00
Orion Hodson
3299968464 Clean up viachan_init. 2003-02-21 01:47:59 +00:00
Orion Hodson
439fa3dd0a Fix assignment of record sgd_addr and clean up via8233chan_init. 2003-02-21 01:47:17 +00:00
Olivier Houchard
38cc994207 Implement a "sndbuf_getbufaddr" function and use it instead of vtophys().
Reviewed by:	orion
2003-02-20 17:31:12 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Brian Feldman
d00d7d5c39 Sound devices were being leaked by dsp_open() not actually releasing the
channels it allocates if chn_reset() on them resulted in failure.
ARROW'D!
2003-02-11 16:58:54 +00:00
Yoshihiro Takahashi
ac7b094dca Include <isa/isavar.h> to fix building on alpha. 2003-02-08 07:05:07 +00:00
Yoshihiro Takahashi
3febcc57ec - Clean up ISA DMA supports.
- Rename all sndbuf_isadma* functions to sndbuf_dma* and move them into
  sys/dev/sound/isa/sndbuf_dma.c.

No response from:	sound
2003-02-07 14:05:34 +00:00
Orion Hodson
63679b6573 Fix comment typo.
Sync with userland test framework which now deals better with pcm feeder kobj
emulation.

Reduce max rate from 96kHz to 48kHz as userland tests found a few bad
points about 90kHz and we don't care about operating up there for now.
2003-02-06 17:32:02 +00:00
Orion Hodson
faea679930 Avoid zero padding when feeding read channels. chn_rdfeed has no way
of knowing data size transformations of feeder chain and in some cases
this means too much data is pulled through chain, eg converting input
stream from 16bits to 8bits on 16bit only h/w.

PR: kern/37831
Submitted by: Harti Brandt <brandt@fokus.fraunhofer.de>
2003-02-03 15:02:28 +00:00
Orion Hodson
ac224567bf Remove mono encodings from vchan format and mixer description. Fixes
mono formats at 44.1kHz playing at double speed when vchans are
enabled.
2003-02-03 03:20:27 +00:00
Orion Hodson
a825c6e59e Print ac97 name/id on normal boot.
Fix typo reported in pr misc/47794.
2003-02-03 01:38:43 +00:00
Alfred Perlstein
c023201af1 remove MIN now that it's a standard kernel define 2003-02-02 13:21:05 +00:00
Alfred Perlstein
8deebb0160 Consolidate MIN/MAX macros into one place (param.h).
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-02-02 13:17:30 +00:00
Orion Hodson
456922d5f2 o Constrain inputs to 25Hz granularity so interpolator can operate
between any pair of values in range 4-96kHz.  Thanks to Ken Marks for
discovering there were problems with the previous version.

o Use a non-recursive gcd routine.
2003-01-30 16:32:56 +00:00
Orion Hodson
cb4458e030 Disable DRA to fix problems with recording. 2003-01-26 04:23:23 +00:00