on friday 13th and without making a universe). This adds struct and
constant definitions for ATM traffic parameters and re-enables the
build of the midway driver.
Tested by: make universe
function couldn't handle chains of > MCLBYTES, and it had a bug which
caused corruption and panics in certain low mbuf situations.
Additionally, change the failure case so that looutput returns ENOBUFS
rather than attempting to pass on non-defragmented mbuf chains.
Finally, remove the printf which would happen every time the low memory
situation occured. It served no useful purpose other than to clue me
in as to what was causing the panic in question. :)
MFC after: 4 days
ILMI daemons. Factor out common softc fields for all ATM interfaces that
need to be externally visible into an ifatm structure and make the midway
driver using this structure and fill the MIB.
be changed, it is very convenient to be able to toggle SDH/Sonet,
idle/unassigned cells and scrambled mode and to see the carrier
state.
Reviewed by: -arch (if_media.h definitions)
(currently) only consumer (en).
Add a sysctl node hw.atm where the atm drivers will hook on their hardware
sysctl sub-trees.
Make atm_ifattach call if_attach and remove the corresponding call to if_attach
from en. Create atm_ifdetach and use that in en.
While the last change actually changes the interface this is not a problem in
practice because the only other consumer of this API is an older LANAI driver
on the net, that is not ready for current anyway.
Reviewed by: -atm
11a/b/g by adding an optional 3-bit mode field
o correct the spelling of OFDM (was ODFM)
o add an 802.11 subtype option for turbo mode: the phy is clocked at 2x the
normal clock rate; note this can be applied to both OFDM in 11a and OFDM
in 11g mode (and possibly DS11 in 11b for certain phy's)
o add 802.11 CCK aliases for 11b/11g rates--the more common terminology
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
- Support IFF_MONITOR.
- Borrow some consistency for if_input() routines from if_ethersubr.c.
- Correct comments regarding fddi_input() that no longer apply.
frames. A comment in if_atm.h suggests that both macros, that for extracting
the ethertype and that for inserting it, handle their argument in host
byte order. In fact, the inserting macro treated its argument as an opposite
host order short and the calling code feeds it the result of htons(). This
happens to work on i386, but fails on sparc. Make the macro use real host
endianess.
Reviewed by: kjc, atm@
is more robust and prevents the hijacking of /dev/console for the typical
mistake.
Remove unneeded MAJOR_AUTO uses, it is only needed explicitly now if the
driver source has cross-branch compatibility to old releases.
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.
Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
warning which breaks builds.
cc1: warnings being treated as errors
src/sys/net/bridge.c: In function `bdg_forward':
sys/net/bridge.c:931: warning: suggest parentheses around assignment used as truth value
*** Error code 1
IP fast forwarding, SIOCGIFADDR, setting hardware address (not currently
enabled in cm driver), multicasts (experimental)
- add ARC_MAX_DATA, use IF_HANDOFF, remove arc_sprintf() and some unused
variables
- if_simloop logic is made more similar to ethernet
- drop not ours packets early (if we are not in promiscous mode)
Submitted by: mark tinguely (partially)
parent device, if there is a parent configured. Modify the result
returned by the parent to indicate that the only supported media
is the currently configured one.
Reviewed by: brooks
and set the link type for use by libpcap and tcpdump
o move mtx unlock in bpfdetach up; it doesn't need to be held so long
o change printf in bpf_detach to distinguish it from the same one in bpfsetdlt
Note there are locking issues here related to ioctl processing; they
have not been addressed here.
Submitted by: Guy Harris <guy@alum.mit.edu>
Obtained from: NetBSD (w/ locking modifications)
was used to control code which were conditional on DEVFS' precense
since this avoided the need for large-scale source pollution with
#include "opt_geom.h"
Now that we approach making DEVFS standard, replace these tests
with an #ifdef to facilitate mechanical removal once DEVFS becomes
non-optional.
No functional change by this commit.
state machine to provide station and host ap functionality for drivers.
More work will follow to split out the state machine and protocol
support from the ioctl interfaces to ease portability/sharing with
NetBSD and forthcoming ports to other systems.
Reviewed by: imp
Obtained from: NetBSD (originally)
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a "copy" operation. This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain. This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.
These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block. This
introduces an incompatibility with openbsd which we may want to revisit.
Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them. We may want to support this;
for now we watch for it with an assert.
Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.
Supported by: Vernier Networks
Reviewed by: Robert Watson <rwatson@FreeBSD.org>
revision 1.62. It was checking for M_PREPEND() failing, not for the
case of a NULL mbuf pointer being supplied to the macro. Back out
that revision, and fix the NULL dereference by not calling EH_RESTORE()
in the case where the mbuf pointer is NULL because the firewall
rejected the packet.
when julian@ added it, but the commented out code had at least
one bug -- not freeing the allocated mbuf.
Anyway, this comment no longer applies as of revision 1.67, so
remove it.
the entry being removed (ret_nrt != NULL), increment the entry's
rt_refcnt like we do it for RTM_ADD and RTM_RESOLVE, rather than
messing around with 1->0 transitions for rtfree() all over.
to current leaves because function may vanish the current node.
If parent RTA_GENMASK route has a clone (a "cloning clone"), an
rn_walktree_from() starting from parent will cause another walk
starting from clone. If a function is either rt_fixdelete() or
rt_fixchange(), this recursive walk may vanish the leaf that is
remembered by an outer walk (the "next leaf" above), panicing a
system when it resumes with an outer walk.
The following script paniced my single-user mode booted system:
: sysctl net.inet.ip.forwarding=1
: ipfw add 1 allow ip from any to any
: ifconfig lo0 127.1
: route add -net 10 -genmask 255.255.255.0 127.1
: telnet 10.1 # rt_fixchange() panic
: telnet 10.2
: telnet 10.1
: route delete -net 10 # rt_fixdelete() panic
For the time being, avoid these races by disallowing recursive
walks in rt_fixchange() and rt_fixdelete().
Also, make a slight optimization in the rtrequest(RTM_RESOLVE)
case: there is no reason to call rt_fixchange() in this case.
PR: kern/37606
MFC after: 5 days
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
bpf_alloc() and pass the 'canwait' flag(s) along. It's been changed
to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
flag (and only one of those two).
Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)
mbuf for a packet looping back to provide alignment guarantees for
KAME. Unfortunately, this code performs a direct copy of the header
rather than using a header copying primitive (largely because we have
sucky header copying primitives). This results in a multiple free
of the MAC label in the header when the same label data is freed
twice when the two mbufs with that header are freed. As a temporary
work-around, clear the initialized flag on the label to prevent the
duplicate free, which prevents panics on large unaligned loopback
IP and IPv6 data. The real fix is to improve and make use of proper
packet header copying routines here.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
bridge.c nor if_ethersubr.c depend on IPFIREWALL.
Restore the use of fw_one_pass in if_ethersubr.c
ipfw.8 will be updated with a separate commit.
Approved by: re
No functional changes, but:
+ the mrouting module now should behave the same as the compiled-in
version (it did not before, some of the rsvp code was not loaded
properly);
+ netinet/ip_mroute.c is now truly optional;
+ removed some redundant/unused code;
+ changed many instances of '0' to NULL and INADDR_ANY as appropriate;
+ removed several static variables to make the code more SMP-friendly;
+ fixed some minor bugs in the mrouting code (mostly, incorrect return
values from functions).
This commit is also a prerequisite to the addition of support for PIM,
which i would like to put in before DP2 (it does not change any of
the existing APIs, anyways).
Note, in the process we found out that some device drivers fail to
properly handle changes in IFF_ALLMULTI, leading to interesting
behaviour when a multicast router is started. This bug is not
corrected by this commit, and will be fixed with a separate commit.
Detailed changes:
--------------------
netinet/ip_mroute.c all the above.
conf/files make ip_mroute.c optional
net/route.c fix mrt_ioctl hook
netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here
together with other rsvp code, and a couple
of indentation fixes.
netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks
netinet/ip_var.h rsvp function hooks
netinet/raw_ip.c hooks for mrouting and rsvp functions, plus
interface cleanup.
netinet/ip_mroute.h remove an unused and optional field from a struct
Most of the code is from Pavlin Radoslavov and the XORP project
Reviewed by: sam
MFC after: 1 week
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible
Reviewed by: many
Approved by: re
drivers "tag packets" with an m_tag and the input packet handling recognizes
such packets and does the right thing
o track the number of active vlans on an interface; this lets lots of places
only do vlan-specific processing when needed
o track changes to ether_ifdetach/ether_ifattach
o track bpf changes
o eliminate the use of M_PROTO1 for communicating to drivers about tagged
packets
o eliminate the use of IFF_LINK0 for drivers communicating to the vlan code
that they support h/w tagging; replaced by explicit interface capabilities
o add ifnet capabilities for h/w tagging and support of "large mtu's"
o use new interface capabilities to auto-configure use of large mtu's and h/w
tagging
o add support for proper handling of promiscuous mode
o document driver/vlan communication conventions
Reviewed by: many
Approved by: re
o add if_input member for interface drivers to call through to pass packets "up"
o remove ethernet-specific function decls (moved to ethernet.h)
Reviewed by: many
Approved by: re
ether_header; instead drivers are to leave the Ethernet header at the
front of the packet
o add declarations for netgraph and vlan hooks that were removed from ethernet.h
o change various in-file calling conventions to track change in input API
o fixup bridge support to handle Ethernet header no longer being stripped
o add consistency checks to ether_input to catch problems with the change
in the API; some of these may want to be moved to #ifdef DIAGNOSTIC at a
later time (though they are not too expensive to leave as is)
o change ether_demux to eliminate the passing of the Ethernet header; it is
now expected at the front of the packet a la ether_input
o add ether_sprintf compatibility shim
o change ether_ifattach API to remove "bpf supported param" and add a pointer
to the MAC address to be installed for the LL address (this is for future
changes to divest struct arpcom from struct ifnet)
o change ether_ifdetach API to remove "bpf support param"
Reviewed by: many
Approved by: re
o ETHER_* (ETHER_ALIGN, ETHER_MAX_FRAME, ETHER_CRC_LEN, etc.)
o M_HASFCS for drivers to indicate packets include FCS
o remove global declarations for ng_ether* and vlan_* since these
represent a private contract between the if_ethersubr.c code and
certain parts of the system that should not normally be abused
o add ether_* declarations that were elsewhere
o remove ETHER_BPF_* since they are no longer used with the parameter
no longer passed to ether_ifattach and ether_ifdetach
Reviewed by: many
Approved by: re
o introduce BPF_TAP and BPF_MTAP macros to hide implementation details and
ease code portability
o use m_getcl where appropriate
Reviewed by: many
Approved by: re
Obtained from: NetBSD (multiple link type support)
labeling checks and operations as with other network interfaces.
Eventually, if it proves desirable, we might want to offer special
casing of this or other tunnel interfaces where we have an existing
label of interest, rather than treating it as though it's an
entirely fresh mbuf in the incoming/outgoing encapsulation directions.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
transmission checks; when it is received, label the packet appropriately.
Although we don't have a local FDDI setup to test this with, the
labeling and checks are identical to other interface classes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
appropriate interface transmission checks and delivery labeling. While
we don't have a local ATM configuration, this code is almost identical
to all other interface classes.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
