- Change name to reflect this
- Install all kernel modules
- Choose image size that i386 and amd64 can be combined into one image
- Mount tmpfs over /boot/zfs for zpool imports
These already worked: $# ${#} ${##} ${#-} ${#?}
These now work as well: ${#+word} ${#-word} ${##word} ${#%word}
There is an ambiguity in the standard with ${#?}: it could be the length of
$? or it could be $# giving an error in the (impossible) case that it is not
set. We continue to use the former interpretation as it seems more useful.
The test was support to check if SUID/SGID bits are removed on first
write, but actually we were checking if they were removed after close.
Now we can check if SUID/SGID bits are gone after first write.
While here add checks to see if when both SUID and SGID bits are set they are
both cleared on first write.
- fchmod(2),
- fchown(2),
- fchflags(2),
- fstat(2),
- ftruncate(2),
- fpathconf(2),
- lpathconf(2).
Make write(2) syscall to take descriptor instead of file name.
We implement descriptors by keeping track of open files and allowing to
reference them by the following syscalls. Because pjdfstest already supports
executing multiple syscalls from one command it works pretty well.
For example, the following command:
pjdfstest open foo "O_CREAT,O_RDWR" 0 : open bar "O_CREAT,O_RDONLY" 640 : fchmod 0 0666 : fchown 0 -1 20 : fchmod 1 0444
is equivalent of (error checking omitted):
int fd[2];
fd[0] = open("foo", O_CREAT | O_RDWR, 0);
fd[1] = open("bar", O_CREAT | O_RDONLY, 0640);
fchmod(fd[0], 0666);
fchown(fd[0], -1, 20);
fchmod(fd[1], 0444);
Preserving $? may cause problems particularly if set -e is in effect.
It may be useful to preserve the old value of $? in the dot script but this
must not be implemented in such a way that it would break this test.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
Sync up with flags understood by install(1) [1], and make install(1)'s
usage output not hide the clearly documented -M flag.
PR: misc/154739 [1]
Submitted by: arundel
images that are of a certain size. The geometery is bogus, but that
doesn't matter since the new packet mode onviates the need to get the
geometry right.
* In {(...) <redir1;} <redir2, do not drop redir1.
* Maintain the difference between (...) <redir and {(...)} <redir:
In (...) <redir, the redirection is performed in the child, while in
{(...)} <redir it should be performed in the parent (like {(...); :;}
<redir)
POSIX requires this and it is simpler than the previous code that remembered
command locations when appending directories to PATH.
In particular,
PATH=$PATH
is no longer a no-op but discards all cached command locations.
If execve() returns an [ENOEXEC] error, check if the file is binary before
trying to execute it using sh. A file is considered binary if at least one
of the first 256 bytes is '\0'.
In particular, trying to execute ELF binaries for the wrong architecture now
fails with an "Exec format error" message instead of syntax errors and
potentially strange results.
hexdump.
This is a part replacement of the old athprom code, which tries
to both fetch and print the contents of an eeprom dump.
A tool to generate hexdumps from a running system will follow shortly.
* add missing includes to quieten warnings
* fix an inline function decl to have a return type
* since .h files are created during the build (opt_ah.h, ah_osdep.h)
which modify the behaviour of the HAL include/source files,
include OBJDIR in the path so the #include's work.
The tools should now build when the directory is added to LOCAL_DIRS
during a make buildworld.
When a foreground job exits on a signal, a message is printed to stdout
about this. The buffer was not flushed after this which could result in the
message being written to the wrong file if the next command was a builtin
and had stdout redirected.
Example:
sh -c 'kill -9 $$'; : > foo; echo FOO:; cat foo
Reported by: gcooper
MFC after: 1 week
This is useful so that it is easier to exit on a signal than to reset the
trap to default and resend the signal. It matches ksh93. POSIX says that
'exit' without args from a trap action uses the exit status from the last
command before the trap, which is different from 'exit $?' and matches this
if the previous command is assumed to have exited on the signal.
If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default
action for the signal is to ignore it, a normal _exit(2) is done with exit
status 128+signal_number.
* Make 'trap --' do the same as 'trap' instead of nothing.
* Make '--' stop option processing (note that '-' action is not an option).
Side effect: The error message for an unknown option is different.
When running with a custom locale setup, it's easy to confuse the
date regression tests and cause them to fail, e.g. when LANG='C'
but LC_ALL='el_GR.UTF-8'. Set LC_ALL to 'C', which overrides all
other LC_xxx options, to avoid this sort of problem.
Reviewed by: uqs, edwin
All builtins are now always found before a PATH search.
Most ash derivatives have an undocumented feature where the presence of an
entry "%builtin" in $PATH will cause builtins to be checked at that point of
the PATH search, rather than before looking at any directories as documented
in the man page (very old versions do document this feature).
I am removing this feature from sh, as it complicates the code, may violate
expectations (for example, /usr/bin/alias is very close to a forkbomb with
PATH=/usr/bin:%builtin, only /usr/bin/builtin not being another link saves
it) and appears to be unused (all the %builtin google code search finds is
in some sort of ash source code).
Note that aliases and functions took and take precedence above builtins.
Because aliases work on a lexical level they can only ever be overridden on
a lexical level (quoting or preceding 'builtin' or 'command'). Allowing
override of functions via PATH does not really fit in the model of sh and it
would work differently from %builtin if implemented.
Note: POSIX says special builtins are found before functions. We comply to
this because we do not allow functions with the same name as a special
builtin.
Silence from: freebsd-hackers@ (message sent 20101225)
Discussed with: dougb
It should use the original exit status, just like falling off the
end of the trap handler.
Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
- Sort the includes of pack.c, moving sys/*.h files near the top.
- Add a couple of missing #include lines, and remove the need for
custom -include options in the CFLAGS of the test Makefile.
- Remove the ad-hoc 'all' target, but keep its 'regress' bits for
testing.
- Convert the ad-hoc 'clean' target to proper CLEANFILES stuff,
so that the normal bsd.prog.mk machinery can clean up.
- Use `make -V .OBJDIR' to detect the place where 'pack' lives,
so that regress.t works both with and without 'make obj'.
Reviewed by: uqs
MFC after: 1 week
An error message is written, the builtin is not executed, nonzero exit
status is returned but the shell does not abort.
This was already checked for special builtins and external commands, with
the same consequences except that the shell aborts for special builtins.
Obtained from: NetBSD
Change the criterion for builtins to be safe to execute in the same process
in optimized command substitution from a blacklist of only cd, . and eval to
a whitelist.
This avoids clobbering the main shell environment such as by $(exit 4) and
$(set -x).
The builtins jobid, jobs, times and trap can still show information not
available in a child process; this is deliberately permitted. (Changing
traps is not.)
For some builtins, whether they are safe depends on the arguments passed to
them. Some of these are always considered unsafe to keep things simple; this
only harms efficiency a little in the rare case they are used alone in a
command substitution.
Before considering to execute a command substitution in the same process,
check if any of the expansions may have a side effect; if so, execute it in
a new process just like happens if it is not a single simple command.
Although the check happens at run time, it is a static check that does not
depend on current state. It is triggered by:
- expanding $! (which may cause the job to be remembered)
- ${var=value} default value assignment
- assignment operators in arithmetic
- parameter substitutions in arithmetic except ${#param}, $$, $# and $?
- command substitutions in arithmetic
This means that $((v+1)) does not prevent optimized command substitution,
whereas $(($v+1)) does, because $v might expand to something containing
assignment operators.
Scripts should not depend on these exact details for correctness. It is also
imaginable to have the shell fork if and when a side effect is encountered
or to create a new temporary namespace for variables.
Due to the $! change, the construct $(jobs $!) no longer works. The value of
$! should be stored in a variable outside command substitution first.
This test verifies that certain expansions without side effects do not
cause the command substitution to be executed in a child process.
This is not a correctness requirement, but it involves a nontrivial amount
of code and it would be unfortunate if it stopped working.
Command substitutions consisting of a single simple command are executed in
the main shell process but this should be invisible apart from performance
and very few exceptions such as $(trap).
If a command substitution consists of one special builtin and there is a
redirection error, this should not abort the outer shell.
It was fixed in r201366 by ignoring special builtin properties for command
substitutions consisting of one builtin.
The #define for warnx now behaves much like the libc function (except that
it uses sh command name and output).
Also, it now uses C99 __VA_ARGS__ so there is no need for three different
macros for 0, 1 or 2 parameters.
Constants in arithmetic starting with 0 should be octal only.
This avoids the following highly puzzling result:
$ echo $((018-017))
3
by making it an error instead.
The CTLESC byte to protect a special character was output before instead of
after a newline directly preceding the special character.
The special handling of newlines is because command substitutions discard
all trailing newlines.
o Create a sparse file instead of a fully zerod one. This trades the
possibiltiy of running out of space during the build for the speed
gain not having do write all those zeros...
Submitted by: n_hibma
When a fast machine first brings up some non TCP networking program
it is quite possible that we will drop packets due to the fact that
only one packet can be held per ARP entry. This leads to packets
being missed when a program starts or restarts if the ARP data is
not currently in the ARP cache.
This code adds a new sysctl, net.link.ether.inet.maxhold, which defines
a system wide maximum number of packets to be held in each ARP entry.
Up to maxhold packets are queued until an ARP reply is received or
the ARP times out. The default setting is the old value of 1
which has been part of the BSD networking code since time
immemorial.
Expose the time we hold an incomplete ARP entry by adding
the sysctl net.link.ether.inet.wait, which defaults to 20
seconds, the value used when the new ARP code was added..
Reviewed by: bz, rpaulo
MFC after: 3 weeks
Convert the tests to the perl prove format.
Remove obsolete TEST.README (results of an old TEST.sh for some old Unices)
and TEST.csh (old tests without correct values, far less complete than
TEST.sh).
MFC after: 1 week
- Use KERNCONFDIR with KERNCONF instead of copying the kernel config into the source tree
so included kernel configs work.
- Put more stuff in the _.bk/_.ik log file, not just make statements.
- Add the kernel config name to the pprint during kernel installation.
- Add NANO_MODULES providing a list of modules to build and install.
Reviewed by: imp
MFC after: 2 weeks
This moves the function of the noaliases variable into the checkkwd
variable. This way it is properly reset on errors and aliases can be used
normally in the commands for each case (the case labels recognize the
keyword esac but no aliases).
The new code is clearer as well.
Obtained from: dash
Apart from detecting breakage earlier or at all, this also fixes a segfault
in the testsuite. The "handling" of the breakage left an invalid internal
representation in some cases.
Examples:
echo a; do echo b
echo `) echo a`
echo `date; do do do`
Exp-run done by: pav (with some other sh(1) changes)
subevalvar() incorrectly assumed that CTLESC bytes were present iff the
expansion was quoted. However, they are present iff various processing such
as word splitting is to be done later on.
Example:
v=@$e@$e@$e@
y="${v##*"$e"}"
echo "$y"
failed if $e contained the magic CTLESC byte.
Exp-run done by: pav (with some other sh(1) changes)
The code is inspired by NetBSD sh somewhat, but different because we
preserve the old Almquist/Bourne/Korn ability to have an unquoted part in a
quoted ${v+word}. For example, "${v-"*"}" expands to $v as a single field if
v is set, but generates filenames otherwise.
Note that this is the only place where we split text literally from the
script (the similar ${v=word} assigns to v and then expands $v). The parser
must now add additional markers to allow the expansion code to know whether
arbitrary characters in substitutions are quoted.
Example:
for i in ${$+a b c}; do echo $i; done
Exp-run done by: pav (with some other sh(1) changes)
If double-quote state does not match, treat the '}' literally.
This ensures double-quote state remains the same before and after a
${v+-=?...} which helps with expand.c.
It makes things like
${foo+"\${bar}"}
which I have seen in the wild work as expected.
Exp-run done by: pav (with some other sh(1) changes)
This is a syntax error.
POSIX does not say explicitly whether defining a function with the same name
as a special builtin is allowed, but it does say that it is impossible to
call such a function.
A special builtin can still be overridden with an alias.
This commit is part of a set of changes that will ensure that when
something looks like a special builtin to the parser, it is one. (Not the
other way around, as it remains possible to call a special builtin named
by a variable or other substitution.)
Exp-run done by: pav (with some other sh(1) changes)
Add some conservative checks on function names:
- Disallow expansions or quoting characters; these can only be called via
strange control characters
- Disallow '/'; these functions cannot be called anyway, as exec.c assumes
they are pathnames
- Make the CTL* bytes work properly in function names.
These are syntax errors.
POSIX does not require us to support more than names (letters, digits and
underscores, not starting with a digit), but I do not want to restrict it
that much at this time.
Exp-run done by: pav (with some other sh(1) changes)
This is how ksh93 treats ! within a pipeline and makes the ! in
a | ! b | c
negate the exit status of the pipeline, as if it were
a | { ! b | c; }
Side effect: something like
f() ! a
is now a syntax error, because a function definition takes a command,
not a pipeline.
Exp-run done by: pav (with some other sh(1) changes)
feedback regarding user error.
Provide default loop and timing settings.
Add a new test that just times pread() without the open()/close().
Mark tests requiring a path argument so we can provide better feedback
to the user than EFAULT on (null).
Sponsored by: Google, Inc.
MFC after: 2 weeks
suffer fewer rounding errors with smaller numbers; fix argc validation
so multiple tests run on a single command line.
Sponsored by: Google, Inc.
MFC after: 2 weeks
argument to be passed on the command line, allowing file-related tests
to be pointed at wherever desired.
Sponsored by: Google, Inc.
MFC after: 2 weeks
each loop, rather than once up front. The distinction is unimportant
when doing a fix iteration count, but when using a timer, it should vary.
Sponsored by: Google, Inc.
MFC after: 2 weeks
- Use getopt rather than hand-parsed arguments
- Allow iterations to be specified and/or a new number of seconds bound
on the number of iterations
- Fix printout of timer resolution
- Add new tests, such as TCP and UDP socket creation, and open/read/close
of /dev/zero and /dev/null.
Sponsored by: Google, Inc.
MFC after: 2 weeks
microbenchmark suite:
- Use common benchmark_start/benchmark_stop routines to simplify
individual benchmarks.
- Add a central table of tests with names, where new tests can be
hooked in easily.
- Add new benchmarks for dup, shm_open, shm_open + fstat, fork,
vfork, vfork + exec, chroot, setuid.
- Accept a number of loops, not just a number of iterations.
- Report results more usefully in a table.
Sponsored by: Google, Inc.
MFC after: 2 weeks
and why. The first case is correct usage which has but one correct output.
The 2nd and 3rd cases are incorrect usage in which the exact output is
not standardized and various shells give various allowable output.
immediately written into the stack after the call. Instead let the caller
manage the "space left".
Previously, growstackstr()'s assumption causes problems with STACKSTRNUL()
where we want to be able to turn a stack into a C string, and later
pretend the NUL is not there.
This fixes a bug in STACKSTRNUL() (that grew the stack) where:
1. STADJUST() called after a STACKSTRNUL() results in an improper adjust.
This can be seen in ${var%pattern} and ${var%%pattern} evaluation.
2. Memory leak in STPUTC() called after a STACKSTRNUL().
Reviewed by: jilles
