firmware to delay completion of commands so that it can attempt to batch
a bunch of completions at once- either returning 16 bit handles in mailbox
registers, or in a resposne queue entry that has a whole wad of 16 bit handles.
Distinguish between 2300 and 2312 chipsets- if only because the revisions
on the chips have different meanings.
Add more instrumentation plus ISP_GET_STATS and ISP_CLR_STATS ioctls.
Run up the maximum number of response queue entities we'll look at
per interrupt.
If we haven't set HBA role yet, always return success from isp_fc_runstate.
MFC after: 2 weeks
(There has been some discussion, whether ENOENT or EBADF is more
appropriate. I choose the latter, since the operation is not supported
on the file descriptor at that time, even if it was, immediately before.)
PR: 32681
Reviewed by: dillon, iedowse, ...
Approved by: nectar
MFC after: 3 days
(pending RE approval)
substantial fraction of the number of entries of tte's in the tsb
would need to be looked up, traverse the tsb instead. This is crucial
in some places, e.g. when swapping out a process, where a certain
pmap_remove() call would take very long time to complete without this.
2. Implement pmap_qenter_flags(), which will become used later
3. Reactivate the instruction cache flush done when mapping as executable.
This is required e.g. when executing files via NFS, but is known to
cause problems on UltraSPARC-IIe CPU's. If you have such a CPU, you
will need to comment this call out for now.
Submitted by: jake (3)
date: 2000/02/29 21:37:01; author: augustss; state: Exp;
Distinguish between device and interface classes.
(I finally found a document that said that they were different.)
struct ofw_nexus_reg. Implement UPA device memory management in the
nexus driver.
Adapt the psycho driver to these changes, and do some minor cleanup work
while being there.
form L0IFPI2UNIT. This could result in a panic if the user tried to
trace using isdntrace(8). I fixed this locally but forgot to commit it.
Reminded by: "Wittig, Christoph" <wc@medianet-world.de>
down, even if there are hung processes and the mount is non-
interruptible.
This works by having nfs_unmount call a new function nfs_nmcancelreqs()
in the FORCECLOSE case. It scans the list of outstanding requests
and marks as interrupted any requests belonging to the specified
mount. Then it waits up to 30 seconds for all requests to terminate.
A few other changes are necessary to support this:
- Unconditionally set a socket timeout so that even hard mounts
are guaranteed to occasionally check the R_SOFTTERM flag on
requests. For hard mounts this flag can only be set by
nfs_nmcancelreqs().
- Reject requests on a mount that is currently being unmounted.
- Never grant the receive lock to a request that has been cancelled.
This should also avoid an old problem where a forced NFS unmount
could cause a crash; it occurred when a VOP on an unlocked vnode
(usually VOP_GETATTR) was in progress at the time of the forced
unmount.
This gives a bit of a sluggish console, but it prevents the console from
getting stuck if we poll too fast, as well as other badness on certain
machines.
2. Fix a test for != 0 that should have been > 0.
Noticed by: Jamey Wood <Jamey.Wood@Sun.COM> and myself
Submitted by: tmm (2)
for certain user pages, stores to kernel pages would not update the
affected cache lines, which would sometimes cause the wrong data to be
returned for loads from kernel pages. This was especially fatal when
the addresses affected held the kernel stack pointer, and a random
value was loaded into it.
Fix a harmless off by one error in a dcache_inval_phys call.
Fix a potential race in setting up the per-cpu pointer if the special
restore fails on return to user mode fails and we need to trap back
into the kernel to fault in more stack.
Remove debug code.
an efficient way for the kernel to bounce certain mundane traps back to
userland for handling there. A user trap handler returns directly to the
trapping user code, rather than going through the kernel again. Only a
handful of instructions are actually executed in kernel mode.
Implement sysarch(SPARC_UTRAP_INSTALL).
Add code to handle sharing of the user trap table across forks and unsharing
at exec.
This can be used to implement efficient tracking of floating point register
usage in userland, fe by a thread library, and to handle alignment fault
fixups and instruction emulation in userland, for which the code may need
to be different for 32bit and 64bit binaries.
something wrong with the kernel stack.
Add code to check the kernel stack pointer in various important places
and try hard not to go down in flames if its wrong.
- Move from msleep/wakeup to condvar.
- Return either zero or a positive errno value from a function.
Return additional result via references.
- Unify the typedef of callback functions.
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
they were right. Fix both kenter() and kremove() for SMP by ensuring that
the tlb is flushed on other cpu's. This will directly solve random-corruption
panic issues in -stable when it is MFC'd. Better to be safe then sorry, we
can optimize this later.
Original Suspicion by: peter
Maybe MFC: immediately on re's permission
socreate(), rather than getting it implicitly from the thread
argument.
o Make NFS cache the credential provided at mount-time, and use
the cached credential (nfsmount->nm_cred) when making calls to
socreate() on initially connecting, or reconnecting the socket.
This fixes bugs involving NFS over TCP and ipfw uid/gid rules, as well
as bugs involving NFS and mandatory access control implementations.
Reviewed by: freebsd-arch
must have been inadvertently changed to '>'. This broke nfsm_adv()
in the case where the advancement count is equal to the amount of
data remaining in the current mbuf. Instead of moving the current
position N bytes forward, nfs_adv() could end up moving it back to
N bytes from the start of the mbuf data.
This should fix the client-side readdirplus problems that have been
reported since September.
In order of importance:
* Make ugen use updated frlengths.
* More tests for NULL pipes.
* Generate better error codes on bulk write.
* Error messages in general.
IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6
interface automatically gets an IPv6 address assigned (and IPv6
multicast packets sent at initialization time). For sppp links where
we know our remote peer wouldn't support IPv6 at all, there's no point
in attempting to negotiate IPV6CP (or to even dial out for an IPv6
packet at all for dial-on-demand interfaces).
I wish there were a more generic way to administratively disable IPv6
on an interface instead. ume told me there isn't.
While i was at it, converted both, enable_vj and enable_ipv6 into flag
bits in struct sppp (enable_vj used to be an int of its own).
MFC after: 1 month
it again when going from INITIAL to STARTING. This has been done for
passive or auto-conecting interfaces always, but not for permanent
ones.
Obtained from: NetBSD (rev 1.32)
& and && has been botched. This was likely the cause for some havoc
with various negotiation cases of sppp in the past.
Obtained from: NetBSD (rev 1.13)
MFC after: 1 week
makes the implied assumption there were another 128 bytes of space in
front of the packet handed off to it... which is not the case for
sppp. This could easily end up in corrupting random memory.
This fix is about the same as revs 1.6, 1.8, and 1.9 from our
i4b_ispppsubr.c.
Also fixed IPCP option negotiation to zero out the options when
starting IPCP. Otherwise, if negotiation parameters change between
various IPCP startups, it could happen that old options would still be
requested (this happened if VJ was turned off, and ended up in half
off the link still negotiating for VJ compression).
IMHO, the base system's sppp is now feature-wise up to date with the
one in the i4b part of the tree, so the latter can be disabled.
MFC after: 1 month
o Do not use a special struct to keep track of CPUs we found;
instead, use struct pcpu. This handles all the magic WRT
thread creation (yay!).
o Respect MAXCPU.
o Use the vhpt_base and vhpt_size values to initialize the AP.
o Style fixes.
Note that this commit temporarily breaks SMP configurations.
Previously APs didn't do anything, but they now enter the
scheduler. They hold sched_lock for more than 5 secs though
and cause a panic. That's what I call progress :-)
ia64_pal_base instead of scanning the EFI tables. This way
AP startup code can more easily use the function.
o Initialize ia64_pal_base in ia64_init(). When the PAL code
doesn't need explicit mapping or no PAL code has been found,
ia64_pal_base will be 0.
o Remove some unused global variables.
o Also in ia64_init(), allocate only 1 page for struct pcpu
and remove some Alpha leftovers.
o Initialize pc_pcb in cpu_pcpu_init().
1222 bytes (derived as the maximum that isc-dhcpd uses). This solves
the problem if a bootp/DHCP reply is over 256 bytes in which the
end of the bootp/DHCP reply will not be found and then the reply will
be ignored. This happens when swap and root paths are longish or many
parameters are set.
Reviewed by: imp
Approved by: imp
