Commit Graph

218 Commits

Author SHA1 Message Date
Brian Somers
bf1eaec5e8 Understand the Session-Timeout RADIUS attribute
Store the Filter-Id attribute (we don't do anything with it yet)

Submitted mostly by: andrew pavlov <and@kremenchug.net>
2002-05-07 10:06:54 +00:00
Brian Somers
c1d57c383a Tweak a data type from char * to u_char * 2002-05-04 21:47:43 +00:00
Brian Somers
5476d2e5aa When it's necessary to kldload tun(4), don't forget to re-try to open
tun0.

Submitted by:	qhwt@myrealbox.com
2002-04-15 00:14:40 +00:00
Brian Somers
356bf92dce Add a sprinkling of mp_Down() calls to ensure that we don't think that
the multi-link NCP is up when it isn't.
2002-03-30 12:52:55 +00:00
Brian Somers
fb11a9c23d Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.
2002-03-30 12:30:09 +00:00
Brian Somers
46df5aa7bc Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

  MYADDR:
    log Session closing: User USER, address HISADDR, up UPTIME

Fixed some memory leakage with commands that expand words.
Made some functions static.
Fixed a diagnostic bug (iface add .... SIOCDIFADDR)
2001-11-03 21:45:32 +00:00
David Malone
2bc21ed985 Hopefully improve control message passing over Unix domain sockets.
1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.

2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.

3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.

4) You can now send SCM_TIMESTAMP messages.

5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).

This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).

6) Fix userland programs to use CMSG_* macros too.

7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.

PR:		29499
MFC after:	6 weeks
2001-10-04 13:11:48 +00:00
Brian Somers
ebdcbc6744 o Enable IFF_MULTICAST when first opening the tun device (and keep the flag
when we ioctl(TUNSIFINFO) under OpenBSD)
o Don't bring the interface up immediately
o Don't complain about unrecognised interface flags in ``show iface''.
2001-08-21 11:07:58 +00:00
Brian Somers
1136c6ac64 Back out the previous fix to deal with kernels that don't support IPv6,
and implement a far more subtle and correct fix.

The reason behind the infinite loop was that ppp was trying to make up
initial IPv6 numbers and wasn't giving up when it failed unexpectedly to
assign the addresses it just fabricated to it's interface (thinking that
the reason was because another interface was using the same address).
It now attempts this up to 100 times before just failing and trying to
muddle along (in reality, this should never happen more than a couple
of times unless our random number generator doesn't work).

Also, when IPv6 is not available, don't even try to assign the IPv6
interface address in the first place...
2001-08-18 19:07:13 +00:00
Brian Somers
c5109a323c Run correctly on a machine built without AF_INET6 support 2001-08-18 13:04:52 +00:00
Brian Somers
971abb295e Probe for the availability of AF_INET6 at startup. If it's not
available, default ipv6cp to disabled and refuse to let the user
enable it.
2001-08-15 13:53:38 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
6301d506fb Reduce the interface MTU by 2 when MPPE has been successfully negotiated.
This is necessary because MPPE will combine the protocol id with the
payload received on the tun interface, encrypt it, then prepend its
own protocol id, effectively increasing the payload by two bytes.
2001-07-03 22:20:19 +00:00
Brian Somers
c8b9fb53a1 Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

	set mtu max 1480

Bump the ppp version number.

Sponsored by:	Monzoon Networks AG and FreeBSD Services Limited
2001-06-18 14:59:36 +00:00
Brian Somers
03a2501aa5 When we change the interface MTU, run through the routing table and tweak
all route MTUs too.
2001-04-05 02:23:48 +00:00
Brian Somers
dc744e1949 Bring the PPPoE interface UP if required
Suggested by: archie
2001-03-28 09:45:27 +00:00
Brian Somers
c4c6616ad6 Deal with ENOENT properly on non-devfs machines
Broken in revision 1.109
2001-03-12 12:53:53 +00:00
Brian Somers
5284761414 MAXPATHLEN -> PATH_MAX
Don't assume MAXHOSTNAMELEN includes the NUL
Correct a diagnostic
Use "localhost" in our prompt instead of ""
2001-03-08 23:51:50 +00:00
Brian Somers
64602637c7 MPPE_MasterKeyValid is only there if HAVE_DES is defined. 2001-02-04 01:20:33 +00:00
Brian Somers
019d32bf74 Make the MPPE MasterKey Invalid messages a bit clearer (it now
complains that you can't do MPPE without CHAP81).

Reset MasterKeyValid to zero when we hit phase DEAD.
2001-02-04 01:08:24 +00:00
Brian Somers
2fc2f70582 Untangle some cunfusion between the CLOSE_STAYDOWN, CLOSE_LCP and
CLOSE_NORMAL meanings.  CLOSE_NORMAL doesn't change the currently
required state, the others do.  This should stop ppp from entering
DATALINK_READY when LCP shutdown doesn't end up happening cleanly.

Bump our version number to reflect this change.
2001-02-04 01:08:22 +00:00
Brian Somers
728ef5b2b0 Try to kldload if_tun if we get ENOENT from opening /dev/tunN -
not just if we get ENXIO.

This makes ppp work with DEVFS when if_tun isn't built into
the kernel (without needing to manually kldload it).
2001-02-02 01:41:26 +00:00
Brian Somers
37b8a5c7bd Only remove socket files with ``set server open''.
Only show the mask in ``show bundle'' when it's been specified.
Complain about unexpected arguments after ``set server {none,open,closed}''
Log re-open failures as warnings rather than phase messages.
Fix some markup for the ``set server'' man page description.
2001-01-29 01:35:06 +00:00
Brian Somers
74457d3d43 Allow ``set server closed'' to close the diagnostic socket.
Allow ``set server open'' to re-open the diagnostic socket.
Handle SIGUSR1 by re-opening the diagnostic socket
When receiving SIGUSR2 (and in ``set server none''), don't forget the
socket details so that ``set server open'' and SIGUSR1 open it again.

Don't create the diagnostic socket as uid 0 !  It's far to dangerous.
2001-01-26 01:41:34 +00:00
Brian Somers
94d7be5294 Add ``enable/disable tcpmssfixup'', defaulting to enabled.
Suggested by:	julian
Hijacked from:	ru (ports/net/tcpmssd)
2000-11-28 13:18:35 +00:00
Brian Somers
794c9bbc80 Support radius accounting, and add a packet count to throughput
statistics as a side effect.

Submitted by: Marcin Cieslak <saper@system.pl>

with some tweaks to RAD_ACCT_SESSION_ID and
RAD_ACCT_MULTI_SESSION_ID generation by me.
2000-08-28 22:44:54 +00:00
Brian Somers
68602c3ee0 Make -DNOSUID (or -DPPP_NOSUID) possible to build ppp without SUID
capabilities.
2000-08-18 00:01:44 +00:00
Brian Somers
ebe96675ee setproctitle() doesn't need to be called with root privs, so move
it from id.c into defs.c
2000-08-16 09:07:23 +00:00
Brian Somers
91cbd2eec0 Maintain input and output throughput averages and choose the highest
of the two when calculating the MP throughput average for the ``set
autoload'' implementation.

This makes more sense as all links I know of are full-duplex.  This
also means that people may need to adjust their autoload settings
as 100% bandwidth is now the theoretical maximum rather than 200%
(but of course, halfing the current settings is probably not the
correct answer either!).

This involves a ppp version bump as we need to pass an extra
throughput array through the MP local domain socket.
2000-08-15 10:25:42 +00:00
Brian Somers
11572abf62 Calculate the average link throughput using a counter based on the
cumulative total of all active links rather than basing it on the
total of PROTO_MP traffic.

This fixes a problem whereby Cisco routers send PROTO_IP packets only
when there's only one link (hmm, what a good idea!).
2000-08-15 00:59:21 +00:00
Brian Somers
0a4b6c5c5c Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.

I made the style more consistent in ip.c - this should really have
been done as a separate commit.
2000-07-11 22:11:36 +00:00
Brian Somers
040cfe28d1 Fix -auto breakage introduced with the last commit. 2000-07-11 09:26:02 +00:00
Brian Somers
9825166754 o Log the (payload/size) of all packet types, not just TCP packets
o  If the new ``filter-decapsulation'' is enabled, delve into UDP packets
   that contain 0xff 0x03 as the first two bytes, and if we recognise it
   as PROTO_IP, decapsulate it for the purpose of filter checking.

   If we recognise it as PROTO_<anything else> mention this for logging
   purposes only.

This change is aimed at people running PPPoUDP where the UDP traffic is
being sent over another PPP link.  It's desireable to have the top level
link connected all the time, but to have the bottom level link capable
of decapsulating the traffic and comparing the payload against the filters,
thus allowing ``set filter dial ...'' to work in tunnelled environments.

The caveat here is that the top ppp cannot employ any compression layers
without making the data unreadable for the bottom ppp.  ``disable deflate
pred1 vj'' and ``deny deflate pred1 vj'' is suggested.
2000-07-07 14:22:08 +00:00
Brian Somers
77fc031d50 Fix a printf-style arg cast (again) 2000-06-23 09:48:26 +00:00
Brian Somers
669b99659d Fix a printf-style format error 2000-06-18 10:07:53 +00:00
Brian Somers
6c1d673108 Add ``set ifqueue'' to control the size of the outgoing packet
queue.  Doing ``set ifqueue 0'' and ``set urgent none'' will allow
full use of luigi's WF2Q code.

Requested by: luigi
2000-06-11 02:30:51 +00:00
Brian Somers
a339e6448b Use mp_CheckAutoloadTimer() rather than mp_StopAutoloadTimer()
when opening or closing an auto link due to the autoload
setting.

Spotted by: David Hedley <david@inty.co.uk>
2000-05-31 15:35:29 +00:00
Brian Somers
5e269efe6e When we do a `dial'' or `open'' from DATALINK_READY, go to
DATALINK_CARRIER and turn off scripting.

This should fix instances where ``term'' is used followed by ~.
and then ``dial''/``open'' (it currently just sits there looking
at you).

Reported by: Tim Vanderhoek <vanderh@ecf.utoronto.ca>
2000-05-26 08:26:56 +00:00
Brian Somers
b42135dee3 When running ppp -background, show comfort messages showing
when we're redialing/reconnecting.

While we're here, log redial, reconnect and phone number
announcements to LogCHAT, and reduce some other logging to
LogDEBUG.
2000-04-07 23:46:14 +00:00
Brian Somers
c8f30703cd I didn't get this right the last time....
When an NCP reaches TLF, *ONLY* datalink_Close() links that are
in DATALINK_OPEN.

When the last link reaches TLD, DOWN all NCPs (as we used to in the
links TLF (which was the wrong place anyway)), as the NCPs aren't
now going to datalink_Close() us unexpectedly, we get to continue
doing what we were told to do in the first place.

The result:  When we lose a link, the IPCP layer goes down and
we actually call the stuff in ppp.linkdown !
2000-04-06 10:03:48 +00:00
Brian Somers
5a83ad1eb1 Correct the parent notification diagnostic emitted from the child
process in -background mode (it should report failure if appropriate).
2000-03-22 03:02:01 +00:00
Brian Somers
5a8b6a98df If a links LCP FSM has reached TLF and it's the last link,
don't bother to re-initialise the NCPs.  Instead wait for
bundle_LinkClosed() to be called - IFF it actually is called.

By initialising the NCPs at this point, ppp was recursing
back into the fsm_Down() routing for the link, and losing
track of the reason that the link was being brought down.
The end result was that ``set reconnect'' would never do
anything.

Patiently pointed out by: ru
2000-03-22 03:02:00 +00:00
Brian Somers
d568d6c405 Add the ``resolv'' command for telling ppp how to deal with resolv.conf.
You can now ``resolv restore'' in ppp.linkdown !
Add DNS0 and DNS1 macros.
2000-03-14 01:47:27 +00:00
Brian Somers
209dc10239 Fix some printf-style argument bugs 2000-03-14 01:47:19 +00:00
Brian Somers
8e7bd08ea4 Correct some typos introduced in the descriptor -> fdescriptor change. 2000-03-14 01:47:07 +00:00
Brian Somers
f013f33ee2 To avoid namespace polution in NetBSD:
``struct descriptor'' -> ``struct fdescriptor''
2000-03-14 01:46:09 +00:00
Brian Somers
3a7b6d76a7 Handle the availability of TUNSIFHEAD. If it's there, use it.
For the moment this is just overhead, but it'll be used for INET6
support later.
2000-01-23 01:48:19 +00:00
Brian Somers
06b47306d1 Use TUNSIFPID when we change our PID (if it exists). 2000-01-21 00:33:27 +00:00
Brian Somers
a19a5c023d Correct usages of getuid() and geteuid()
Pointed out by: billf
1999-12-30 03:36:11 +00:00
Brian Somers
182c898a22 Add a bunch of `const's and fix a typo.
Submitted by: Rich Neswold <rneswold@MCS.Net>
1999-12-27 11:54:57 +00:00