NO_ADAPTIVE_MUTEXES. This option has been enabled by default on amd64 for
quite some time, and has been extensively tested on i386 and sparc64. It
shows measurable performance gains in many circumstances, and few negative
effects. It would be nice in t he future if adaptive mutexes actually went
to sleep after a certain amount of spinning, but that will require quite a
bit more testing.
- `sound'
The generic sound driver, always required.
- `snd_*'
Device-dependent drivers, named after the sound module names.
Configure accordingly to your hardware.
In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.
Suggested by: cg
o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the
acronym to use for debugging related code. The DDB option is used
to enable the DDB debugger backend only.
o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to
KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY.
o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol
lookups as well as KLD symbol lookups at the same time.
o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are
FreeBSD specific. At the same time, the GDB protocol has packets
for console output.
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
thread X switch to thread X (where X is the TID),
show threads list all threads.
The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.
With this change, ia64 has support for breakpoints.
it's in the way even more. Basicly: remove all alpha specific console
support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console
initialization to be identical to all other platforms. In a nutshell:
call cninit().
The platform specific code now only sets or clears RB_SERIAL and thus
automaticly causes the right console to be selected.
sio.c:
o Replace the remote GDB hacks and use the GDB debug port interface
instead.
o Make debugging code conditional upon KDB instead of DDB.
o Call kdb_alt_break() instead of db_alt_break().
o Call kdb_enter() instead of breakpoint().
o Remove the ugly compatibility of using the console as the debug
port.
in particular not without removing the options they replace or in the
proper location in this file. The purpose of this commit is to make it
possible to commit changes in parts without causing massive build
breakages. At least, that's the intend. I have no idea if it actually
works out as I hope...
bootp -> BOOTP
bootp.nfsroot -> BOOTP_NFSROOT
bootp.nfsv3 -> BOOTP_NFSV3
bootp.compat -> BOOTP_COMPAT
bootp.wired_to -> BOOTP_WIRED_TO
- i.e. back out the previous commit. It's already possible to
pxeboot(8) with a GENERIC kernel.
Pointed out by: dwmalone
BOOTP -> bootp
BOOTP_NFSROOT -> bootp.nfsroot
BOOTP_NFSV3 -> bootp.nfsv3
BOOTP_COMPAT -> bootp.compat
BOOTP_WIRED_TO -> bootp.wired_to
This lets you PXE boot with a GENERIC kernel by putting this sort of thing
in loader.conf:
bootp="YES"
bootp.nfsroot="YES"
bootp.nfsv3="YES"
bootp.wired_to="bge1"
or even setting the variables manually from the OK prompt.
This should allow us to more easily break out the acpi and 'legacy pc'
front ends as well (so only the bus front end would touch rtc, for
example).
This isn't a great separation, since isa dma routines are still called
from the MI code, but it is a start.
FAT32 filesystems to be mounted, subject to some fairly serious limitations.
This works by extending the internal pseudo-inode-numbers generated from
the file's starting cluster number to 64-bits, then creating a table
mapping these into arbitrary 32-bit inode numbers, which can fit in
struct dirent's d_fileno and struct vattr's va_fileid fields. The mappings
do not persist across unmounts or reboots, so it's not possible to export
these filesystems through NFS. The mapping table may grow to be rather
large, and may grow large enough to exhaust kernel memory on filesystems
with millions of files.
Don't enable this option unless you understand the consequences.
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
This class is used for detecting volume labels on file systems:
UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660.
It also provide native labelization (there is no need for file system).
g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow.
g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found
where volume labels are stored and I use those offsets here,
but with this class it should be easy to do it as it should be done by
someone who know how.
Implementing volume labels detection for other file systems also should
be trivial.
New providers are created in those directories:
/dev/ufs/ (UFS1, UFS2)
/dev/msdosfs/ (FAT12, FAT16, FAT32)
/dev/iso9660/ (ISO9660)
/dev/label/ (native labels, configured with glabel(8))
Manual page cleanups and some comments inside were submitted by
Simon L. Nielsen, who was, as always, very helpful. Thanks!
namespace. This is to allow decoupling of attachments from ACPI where they
need some functionality when ACPI is present but do not want to require ACPI
to always be loaded.
hash tables used in the sleep queue and turnstile code. Each option adds
a sysctl tree under debug containing the maximum depth of any bucket in
the hash table as well as a separate node for each bucket (or chain)
containing the current depth and maximum depth for that bucket.
Now that the devs files are marked before-depend, we can remvoe them
from a few places they were explicitly mentioned (along with
BEFORE_DEPEND).
Noticed by: bde
Reduce the need for hard coded *devs in various makefiles by declaring
them before-depend.
Other bugs in the handling of *devs remain, but this is the start of
the cleanup. These will be address in future commits.
Cleanup Motivator: bde
Ultra2 users may want to set OFWCONS_POLL_HZ to a value of '20'.
I have left default value at '4' as higher values can consume a more
than is acceptable amount of CPU, and we don't have a consensus yet
what is an optimal value.
Submitted by: Pyun YongHyeon <yongari@kt-is.co.kr>
