Commit Graph

23 Commits

Author SHA1 Message Date
наб
5cdca5b1da autoconf: use include directives instead of recursing down cmd
No installation diff, dist lost
  -zfs-2.1.99/cmd/fsck_zfs/fsck.zfs
which was distributed erroneously, since it's generated

Also clean gitrev on clean

Also add -e 'any possible bashisms' to default checkbashisms flags,
and fully parallelise it and shellcheck, and it works out-of-tree, too

Also align the Release in the dist META file correctly

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13316
2022-05-10 10:18:38 -07:00
Matthew Macy
9f0a21e641
Add FreeBSD support to OpenZFS
Add the FreeBSD platform code to the OpenZFS repository.  As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI.  As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #898 
Closes #8987
2020-04-14 11:36:28 -07:00
Michael Niewöhner
e69bb31b71 Adapt gitignore for modules
Remove the specific gitignore rules for module left-overs and add a
generic one in modules/.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9656
2019-12-02 13:23:47 -08:00
Brian Behlendorf
608f8749a1
Perform KABI checks in parallel
Reduce the time required for ./configure to perform the needed
KABI checks by allowing kbuild to compile multiple test cases in
parallel.  This was accomplished by splitting each test's source
code from the logic handling whether that code could be compiled
or not.

By introducing this split it's possible to minimize the number of
times kbuild needs to be invoked.  As importantly, it means all of
the tests can be built in parallel.  This does require a little extra
care since we expect some tests to fail, so the --keep-going (-k)
option must be provided otherwise some tests may not get compiled.
Furthermore, since a failure during the kbuild modpost phase will
result in an early exit; the final linking phase is limited to tests
which passed the initial compilation and produced an object file.

Once everything has been built the configure script proceeds as
previously.  The only significant difference is that it now merely
needs to test for the existence of a .ko file to determine the
result of a given test.  This vastly speeds up the entire process.

New test cases should use ZFS_LINUX_TEST_SRC to declare their test
source code and ZFS_LINUX_TEST_RESULT to check the result.  All of
the existing kernel-*.m4 files have been updated accordingly, see
config/kernel-current-time.m4 for a basic example.  The legacy
ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases
but it's use is not encouraged.

                  master (secs)   patched (secs)
                  -------------   ----------------
autogen.sh        61              68
configure         137             24  (~17% of current run time)
make -j $(nproc)  44              44
make rpms         287             150

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8547 
Closes #9132
Closes #9341
2019-10-01 12:50:34 -07:00
Dominic Pearson
ff4b68eedc Linux 5.3 compat: Makefile subdir-m no longer supported
Uses obj-m instead, due to kernel changes.

See LKML: Masahiro Yamada, Tue, 6 Aug 2019 19:03:23 +0900

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Dominic Pearson <dsp@technoanimal.net>
Closes #9169
2019-08-19 15:22:52 -07:00
Richard Elling
fc16b4f4c8 git ignore python 3.7 virtual environment directories
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8525
2019-03-25 15:05:26 -07:00
loli10K
7b02fae7a6 Verify .gitignore entries
This change adds a make target 'vcscheck' which scans the git workspace
for new, untracked files missing from the .gitignore configuration; this
is done to help prevent adding unwanted build artifacts to the source
tree during development.

Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8281
2019-01-15 11:56:29 -08:00
Brian Behlendorf
6e72a5b9b6 pyzfs: python3 support (build system)
Almost all of the Python code in the respository has been updated
to be compatibile with Python 2.6, Python 3.4, or newer.  The only
exceptions are arc_summery3.py which requires Python 3, and pyzfs
which requires at least Python 2.7.  This allows us to maintain a
single version of the code and support most default versions of
python.  This change does the following:

* Sets the default shebang for all Python scripts to python3.  If
  only Python 2 is available, then at install time scripts which
  are compatible with Python 2 will have their shebangs replaced
  with /usr/bin/python.  This is done for compatibility until
  Python 2 goes end of life.  Since only the installed versions
  are changed this means Python 3 must be installed on the system
  for test-runner when testing in-tree.

* Added --with-python=<2|3|3.4,etc> configure option which sets
  the PYTHON environment variable to target a specific python
  version.  By default the newest installed version of Python
  will be used or the preferred distribution version when
  creating pacakges.

* Fixed --enable-pyzfs configure checks so they are run when
  --enable-pyzfs=check and --enable-pyzfs=yes.

* Enabled pyzfs for Python 3.4 and newer, which is now supported.

* Renamed pyzfs package to python<VERSION>-pyzfs and updated to
  install in the appropriate site location.  For example, when
  building with --with-python=3.4 a python34-pyzfs will be
  created which installs in /usr/lib/python3.4/site-packages/.

* Renamed the following python scripts according to the Fedora
  guidance for packaging utilities in /bin

  - dbufstat.py     -> dbufstat
  - arcstat.py      -> arcstat
  - arc_summary.py  -> arc_summary
  - arc_summary3.py -> arc_summary3

* Updated python-cffi package name.  On CentOS 6, CentOS 7, and
  Amazon Linux it's called python-cffi, not python2-cffi.  For
  Python3 it's called python3-cffi or python3x-cffi.

* Install one version of arc_summary.  Depending on the version
  of Python available install either arc_summary2 or arc_summary3
  as arc_summary.  The user output is only slightly different.

Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8096
2019-01-06 10:39:41 -08:00
Brian Behlendorf
b669ab83bb
Ignore *.o.ur-safe build artifacts
Generated when building on Ubuntu 18.04.  Also ignore the new
dynamically generated zfs-mount-generator.8 man page, and the
module/.cache.mk file.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7534
2018-05-13 18:59:02 -07:00
Brian Behlendorf
d9ec8b9b2a Add configure option to enable gcov analysis
* Add configure option to enable gcov analysis.
* Includes a few minor ctime fixes.
* Add codecov.yml configuration.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6642
2017-09-15 10:24:13 -07:00
Brian Behlendorf
c8f9061fc7 Retire legacy test infrastructure
* Removed zpios kmod, utility, headers and man page.

* Removed unused scripts zpios-profile/*, zpios-test/*,
  zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
  zpios.sh, and zpool-create.sh.

* Removed zfs-script-config.sh.in.  When building 'make' generates
  a common.sh with in-tree path information from the common.sh.in
  template.  This file and sourced by the test scripts and used
  for in-tree testing, it is not included in the packages.  When
  building packages 'make install' uses the same template to
  create a new common.sh which is appropriate for the packaging.

* Removed unused functions/variables from scripts/common.sh.in.
  Only minimal path information and configuration environment
  variables remain.

* Removed unused scripts from scripts/ directory.

* Remaining shell scripts in the scripts directory updated to
  cleanly pass shellcheck and added to checked scripts.

* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
  match install location name.

* Removed last traces of the --enable-debug-dmu-tx configure
  options which was retired some time ago.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6509
2017-08-15 17:26:38 -07:00
Chunwei Chen
952e490b1b Improve gitignore
Ignore .*.d and exclude Makefile.in in module/
Also, ignore *.patch and *.orig files

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2017-05-25 10:14:13 -07:00
John Wren Kennedy
c1d9abf905 OpenZFS 7290 - ZFS test suite needs to control what utilities it can run
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

Porting Notes:
- Utilities which aren't available under Linux have been removed.
- Because of sudo's default secure path behavior PATH must be
  explicitly reset at the top of libtest.shlib.  This avoids the
  need for all users to customize secure path on their system.
- Updated ZoL infrastructure to manage constrained path
- Updated all test cases
- Check permissions for usergroup tests
- When testing in-tree create links under bin/
- Update fault cleanup such that missing files during
  cleanup aren't fatal.
- Configure su environment with constrained path

OpenZFS-issue: https://www.illumos.org/issues/7290
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6
Closes #5903
2017-04-06 09:25:36 -07:00
Brian Behlendorf
9d70aec6fd Update .gitignore
Two additional files were recently introduced and should be
ignored by git.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5299
2016-10-19 14:29:33 -07:00
Tom Caputi
0b04990a5d Illumos Crypto Port module added to enable native encryption in zfs
A port of the Illumos Crypto Framework to a Linux kernel module (found
in module/icp). This is needed to do the actual encryption work. We cannot
use the Linux kernel's built in crypto api because it is only exported to
GPL-licensed modules. Having the ICP also means the crypto code can run on
any of the other kernels under OpenZFS. I ended up porting over most of the
internals of the framework, which means that porting over other API calls (if
we need them) should be fairly easy. Specifically, I have ported over the API
functions related to encryption, digests, macs, and crypto templates. The ICP
is able to use assembly-accelerated encryption on amd64 machines and AES-NI
instructions on Intel chips that support it. There are place-holder
directories for similar assembly optimizations for other architectures
(although they have not been written).

Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4329
2016-07-20 10:43:30 -07:00
Turbo Fredriksson
0c15bf16f1 Ignore *.{deb,rpm,tar.gz} files in the top directory.
These are build products and should be ignored.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #1402
2013-04-24 16:18:59 -07:00
Jan Engelhardt
ea0fcfc875 gitignore: anchor entries at their respective directory
.ko is specific to module, .m4 to config, etc.

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-04-02 10:50:17 -07:00
Brian Behlendorf
f3757573a6 Refresh RPM packaging
Refresh the existing RPM packaging to conform to the 'Fedora
Packaging Guidelines'.  This includes adopting the kmods2
packaging standard which is used fod kmods distributed by
rpmfusion for Fedora/RHEL.

  http://fedoraproject.org/wiki/Packaging:Guidelines
  http://rpmfusion.org/Packaging/KernelModules/Kmods2

While the spec files have been entirely rewritten from a
user perspective the only major changes are:

* The Fedora packages now have a build dependency on the
  rpmfusion repositories.  The generic kmod packages also
  have a new dependency on kmodtool-1.22 but it is bundled
  with the source rpm so no additional packages are needed.

* The kernel binary module packages have been renamed from
  zfs-modules-* to kmod-zfs-* as specificed by kmods2.

* The is now a common kmod-zfs-devel-* package in addition
  to the per-kernel devel packages.  The common package
  contains the development headers while the per-kernel
  package contains kernel specific build products.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1341
2013-03-18 15:33:17 -07:00
Brian Behlendorf
0da31cd6ca Remove ARCH packaging
The kernel modules are now available in the Arch User Repository
(AUR) via zfs.  Since their packaging is maintained and superior
to ours it is being removed from the tree.

  https://wiki.archlinux.org/index.php/ZFS

Now that various distributions are picking up the packages we
should eventually be able to remove most of this infrastructure.
Packaging belongs with the distributions not upstream.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-06 15:46:41 -08:00
Chris Dunlop
fff276419e Remove autotools products
spl_config.h.in is a generated file: remove and .gitignore it

Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-11 10:15:13 -07:00
Brian Behlendorf
ca8b5af89d Remove autotools products
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #718
2012-08-27 11:47:44 -07:00
Brian Behlendorf
774f7c02b1 Ignore unsigned module build products
Along with the addition of signed kernel modules in newer kernel
we have a few new build products we need to ignore.   LKLM has the
whole thread for those interested: http://lkml.org/lkml/2007/2/14/164
2010-03-09 14:14:09 -08:00
Brian Behlendorf
4cd8e49a69 Add .gitignore files to exclude build products 2010-01-08 11:35:17 -08:00