Commit Graph

32 Commits

Author SHA1 Message Date
Robert Watson
d989c7b389 Introduce a netisr to deliver kernel-generated routing, avoiding
recursive entering of the socket code from the routing code:

- Modify rt_dispatch() to bundle up the sockaddr family, if any,
  associated with a pending mbuf to dispatch to routing sockets, in
  an m_tag on the mbuf.

- Allocate NETISR_ROUTE for use by routing sockets.

- Introduce rtsintrq, an ifqueue to be used by the netisr, and
  introduce rts_input(), a function to unbundle the tagged sockaddr
  and inject the mbuf and address into raw_input(), which previously
  occurred in rt_dispatch().

- Introduce rts_init() to initialize rtsintrq, its mutex, and
  register the netisr.  Perform this at the same point in system
  initialization as setup of the domains.

This change introduces asynchrony between the generation of a
pending routing socket message and delivery to sockets for use
by userspace.  It avoids socket->routing->rtsock->socket use and
helps to avoid lock order reversals between the routing code and
socket code (in particular, raw socket control blocks), as route
locks are held over calls to rt_dispatch().

Reviewed by:		"George V.Neville-Neil" <gnn@neville-neil.com>
Conceptual head nod by:	sam
2004-06-09 02:48:23 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Sam Leffler
7902224c6b o add a flags parameter to netisr_register that is used to specify
whether or not the isr needs to hold Giant when running; Giant-less
  operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
  calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
  Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
  have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive

Supported by:	FreeBSD Foundation
2003-11-08 22:28:40 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Robert Watson
4a583fd480 Slight whitespace cleanup. Whitespace sync to MAC tree. 2002-07-27 19:53:02 +00:00
Alfred Perlstein
929ddbbb89 Remove __P. 2002-03-19 21:54:18 +00:00
Luigi Rizzo
e4fc250c15 Device Polling code for -current.
Non-SMP, i386-only, no polling in the idle loop at the moment.

To use this code you must compile a kernel with

        options DEVICE_POLLING

and at runtime enable polling with

        sysctl kern.polling.enable=1

The percentage of CPU reserved to userland can be set with

        sysctl kern.polling.user_frac=NN (default is 50)

while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.

Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at

	http://info.iet.unipi.it/~luigi/polling/

and also supports polling in the idle loop.

NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.

NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.

Quick description of files touched by this commit:

sys/conf/files.i386
        new file kern/kern_poll.c
sys/conf/options.i386
        new option
sys/i386/i386/trap.c
        poll in trap (disabled by default)
sys/kern/kern_clock.c
        initialization and hardclock hooks.
sys/kern/kern_intr.c
        minor swi_net changes
sys/kern/kern_poll.c
        the bulk of the code.
sys/net/if.h
        new flag
sys/net/if_var.h
        declaration for functions used in device drivers.
sys/net/netisr.h
        NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
        device driver modifications
2001-12-14 17:56:12 +00:00
Jake Burkholder
1eb44f0270 Remove the last of the MD netisr code. It is now all MI. Remove
spending, which was unused now that all software interrupts have
their own thread.  Make the legacy schednetisr use an atomic op
for setting bits in the netisr mask.

Reviewed by:	jhb
2000-12-05 00:36:00 +00:00
John Baldwin
8088699f79 - Overhaul the software interrupt code to use interrupt threads for each
type of software interrupt.  Roughly, what used to be a bit in spending
  now maps to a swi thread.  Each thread can have multiple handlers, just
  like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
  software interrupt thread to run, so spending, NSWI, and the shandlers
  array are no longer needed.  We can now have an arbitrary number of
  software interrupt threads.  When you register a software interrupt
  thread via sinthand_add(), you get back a struct intrhand that you pass
  to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
  more intuitive.  Also, prefix all the members of struct intrhand with
  'ih_'.
- Make swi_net() a MI function since there is now no point in it being
  MD.

Submitted by:	cp
2000-10-25 05:19:40 +00:00
Poul-Henning Kamp
6cb2a0952f Do some cleanups of the HARP atm codes interface into the system:
Define the NETISR just like all the other NETISRs.

unifdef -Usun -D__FreeBSD__  we will probably never support sun4c
and if we do we can't use the solaris code anyway and  I doubt
anybody will be running Fore ATM cards in then in the first place.
2000-10-12 00:03:50 +00:00
Peter Wemm
242c5536ea Clean up some loose ends in the network code, including the X.25 and ISO
#ifdefs.  Clean out unused netisr's and leftover netisr linker set gunk.
Tested on x86 and alpha, including world.

Approved by:	jkh
2000-02-13 03:32:07 +00:00
Bill Paul
a0067d7b89 Attempt to fix a problem with receiving packets on USB ethernet interfaces.
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.

There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)

The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.

The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.

Also removed some uneeded includes from if_aue.c and if_kue.c

Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
2000-01-10 23:12:54 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Yoshinobu Inoue
76429de41a KAME related header files additions and merges.
(only those which don't affect c source files so much)

Reviewed by: cvs-committers
Obtained from: KAME project
1999-11-05 14:41:39 +00:00
Julian Elischer
4cf49a4355 Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from:  Whistle CVS tree
1999-10-21 09:06:11 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
2ef43b0971 Make NETISR_SET use a SYSINIT() rather than a linker set. 1999-04-26 08:52:16 +00:00
Bruce Evans
35b88f573a Fixed pedantic syntax errors caused by a trailing semicolon in a macro
definition.
1998-06-07 11:52:17 +00:00
Bruce Evans
514ede0953 Fixed gratuitous ANSIisms. 1997-09-16 11:44:05 +00:00
Kenjiro Cho
68713f97a1 merge ATM driver 1997-05-09 12:19:06 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Julian Elischer
655929bfba Obtained from: netatalk distribution netatalk@itd.umich.edu
Kernel Appletalk protocol support
both CAP and netatalk can make use of this..
still needs some owrk but  it seemd the right tiime to commit it
so other can experiment.
1996-05-24 01:35:45 +00:00
Peter Wemm
06cc185852 Add a simplistic netisr register routine - I need this now for ppp-2.2. 1995-10-31 19:07:53 +00:00
Julian Elischer
cc6a66f20e Reviewed by: julian and jhay@mikom.csir.co.za
Submitted by:	Mike Mitchell, supervisor@alb.asctmd.com

This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..

Mikes been using it for a year or so
but on 2.0

more changes and stuff will be merged in from other developers now that this is in.

Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
Garrett Wollman
748e0b0acc Make networking domains drop-ins, through the magic of GNU ld. (Some day,
there may even be LKMs.)  Also, change the internal name of `unixdomain'
to `localdomain' since AF_LOCAL is now the preferred name of this family.
Declare netisr correctly and in the right place.
1995-05-11 00:13:26 +00:00
Stefan Eßer
623976474c Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Reviewed by: <wollman>
First hooks and defines for the ISDN driver,
that soon will see the light ...
1995-01-05 19:51:51 +00:00
Paul Richards
cea1da3be2 Make idempotent.
Submitted by:	Paul
1994-08-21 05:11:48 +00:00
David Greenman
3c4dd3568f Added $Id$ 1994-08-02 07:55:43 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Rodney W. Grimes
df8bae1de4 BSD 4.4 Lite Kernel Sources 1994-05-24 10:09:53 +00:00