Commit Graph

79 Commits

Author SHA1 Message Date
Robert Watson
bcf11e8d00 Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.

Discussed with:	pjd
2009-06-05 14:55:22 +00:00
Robert Watson
f93bfb23dc Add internal 'mac_policy_count' counter to the MAC Framework, which is a
count of the number of registered policies.

Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.

This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.

Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.

Obtained from:	TrustedBSD Project
2009-06-02 18:26:17 +00:00
Marko Zec
21ca7b57bd Change the curvnet variable from a global const struct vnet *,
previously always pointing to the default vnet context, to a
dynamically changing thread-local one.  The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE().  Recursions
on curvnet are permitted, though strongly discuouraged.

This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.

The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc.  Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.

The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.

This change also introduces a DDB subcommand to show the list of all
vnet instances.

Approved by:	julian (mentor)
2009-05-05 10:56:12 +00:00
Robert Watson
58f7ce962c Lock receive socket buffer in soo_stat() rather than commenting that we
should lock it, which may marginally improve the consistency of the
results.  Remove comment.

MFC after:	3 days
2008-10-07 07:10:28 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
John Baldwin
e46502943a Make ftruncate a 'struct file' operation rather than a vnode operation.
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
  a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
  object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
  vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.

Submitted by:	rwatson
2008-01-07 20:05:19 +00:00
Robert Watson
30d239bc4c Merge first in a series of TrustedBSD MAC Framework KPI changes
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:

  mac_<object>_<method/action>
  mac_<object>_check_<method/action>

The previous naming scheme was inconsistent and mostly
reversed from the new scheme.  Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier.  Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods.  Also simplify, slightly,
some entry point names.

All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-24 19:04:04 +00:00
Robert Watson
0bf686c125 Remove the now-unused NET_{LOCK,UNLOCK,ASSERT}_GIANT() macros, which
previously conditionally acquired Giant based on debug.mpsafenet.  As that
has now been removed, they are no longer required.  Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.

While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option.  Clean up some related gotos for
consistency.

Reviewed by:	bz, csjp
Tested by:	kris
Approved by:	re (kensmith)
2007-08-06 14:26:03 +00:00
Robert Watson
1a5d072b76 Move to ANSI C function headers. Re-wrap some comments. 2007-03-04 17:50:46 +00:00
Robert Watson
aed5570872 Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h
begun with a repo-copy of mac.h to mac_framework.h.  sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.

This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.

Obtained from:	TrustedBSD Project
Sponsored by:	SPARTA
2006-10-22 11:52:19 +00:00
Robert Watson
b0668f7151 soreceive_generic(), and sopoll_generic(). Add new functions sosend(),
soreceive(), and sopoll(), which are wrappers for pru_sosend,
pru_soreceive, and pru_sopoll, and are now used univerally by socket
consumers rather than either directly invoking the old so*() functions
or directly invoking the protocol switch method (about an even split
prior to this commit).

This completes an architectural change that was begun in 1996 to permit
protocols to provide substitute implementations, as now used by UDP.
Consumers now uniformly invoke sosend(), soreceive(), and sopoll() to
perform these operations on sockets -- in particular, distributed file
systems and socket system calls.

Architectural head nod:	sam, gnn, wollman
2006-07-24 15:20:08 +00:00
Robert Watson
7f53207b92 Introduce three additional MAC Framework and MAC Policy entry points to
control socket poll() (select()), fstat(), and accept() operations,
required for some policies:

        poll()          mac_check_socket_poll()
        fstat()         mac_check_socket_stat()
        accept()        mac_check_socket_accept()

Update mac_stub and mac_test policies to be aware of these entry points.
While here, add missing entry point implementations for:

        mac_stub.c      stub_check_socket_receive()
        mac_stub.c      stub_check_socket_send()
        mac_test.c      mac_test_check_socket_send()
        mac_test.c      mac_test_check_socket_visible()

Obtained from:	TrustedBSD Project
Sponsored by:	SPAWAR, SPARTA
2005-04-16 18:46:29 +00:00
Robert Watson
35a196154f The SO_NOSIGPIPE socket option allows a user process to mark a socket
so that the socket does not generate SIGPIPE, only EPIPE, when a write
is attempted after socket shutdown.  When the option was introduced in
2002, this required the logic for determining whether SIGPIPE was
generated to be pushed down from dofilewrite() to the socket layer so
that the socket options could be considered.  However, the change in
2002 omitted modification to soo_write() required to add that logic,
resulting in SIGPIPE not being generated even without SO_NOSIGPIPE when
the socket was written to using write() or related generic system calls.

This change adds the EPIPE logic to soo_write(), generating a SIGPIPE
signal to the process associated with the passed uio in the event that
the SO_NOSIGPIPE option is not set.

Notes:

- The are upsides and downsides to placing this logic in the socket
  layer as opposed to the file descriptor layer.  This is really fd
  layer logic, but because we need so_options, we have a choice of
  layering violations and pick this one.

- SIGPIPE possibly should be delivered to the thread performing the
  write, not the process performing the write.

- uio->uio_td and the td argument to soo_write() might potentially
  differ; we use the thread in the uio argument.

- The "sigpipe" regression test in src/tools/regression/sockets/sigpipe
  tests for the bug.

Submitted by:		Mikko Tyolajarvi <mbsd at pacbell dot net>
Talked with:		glebius, alfred
PR:			78478
MFC after:		1 week
2005-03-11 15:06:16 +00:00
Warner Losh
9454b2d864 /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 23:35:40 +00:00
Poul-Henning Kamp
a0fbccc9e7 Push Giant down through ioctl.
Don't grab Giant in the upper syscall/wrapper code

NET_LOCK_GIANT in the socket code (sockets/fifos).

mtx_lock(&Giant) in the vnode code.

mtx_lock(&Giant) in the opencrypto code.  (This may actually not be
needed, but better safe than sorry).

Devfs grabs Giant if the driver is marked as needing Giant.
2004-11-17 09:09:55 +00:00
Poul-Henning Kamp
db446e30cc Push Giant down through select and poll.
Don't grab Giant in the upper syscall/wrapper code

NET_LOCK_GIANT in the socket code (sockets/fifos).

mtx_lock(&Giant) in the vnode code.

Devfs grabs Giant if the driver is marked as needing Giant.
2004-11-17 08:01:10 +00:00
Poul-Henning Kamp
e364b59197 Polish two functions a bit so that it is easier to wrap them in
locks if/when we need that.
2004-11-13 17:21:26 +00:00
Robert Watson
a6719c82b1 Push Giant acquisition down into fo_stat() from most callers. Acquire
Giant conditional on debug.mpsafenet in the socket soo_stat() routine,
unconditionally in vn_statfile() for VFS, and otherwise don't acquire
Giant.  Accept an unlocked read in kqueue_stat(), and cryptof_stat() is
a no-op.  Don't acquire Giant in fstat() system call.

Note: in fdescfs, fo_stat() is called while holding Giant due to the VFS
stack sitting on top, and therefore there will still be Giant recursion
in this case.
2004-07-22 20:40:23 +00:00
Robert Watson
1c1ce9253f Push acquisition of Giant from fdrop_closed() into fo_close() so that
individual file object implementations can optionally acquire Giant if
they require it:

- soo_close(): depends on debug.mpsafenet
- pipe_close(): Giant not acquired
- kqueue_close(): Giant required
- vn_close(): Giant required
- cryptof_close(): Giant required (conservative)

Notes:

  Giant is still acquired in close() even when closing MPSAFE objects
  due to kqueue requiring Giant in the calling closef() code.
  Microbenchmarks indicate that this removal of Giant cuts 3%-3% off
  of pipe create/destroy pairs from user space with SMP compiled into
  the kernel.

  The cryptodev and opencrypto code appears MPSAFE, but I'm unable to
  test it extensively and so have left Giant over fo_close().  It can
  probably be removed given some testing and review.
2004-07-22 18:35:43 +00:00
Robert Watson
d43c1f67cc Annotate two intentionally unlocked reads with comments.
Annotate a potentially inconsistent result returned to user space when
performing fstaT() on a socket due to not using socket buffer locking.
2004-06-20 17:35:50 +00:00
Robert Watson
9535efc00d Merge additional socket buffer locking from rwatson_netperf:
- Lock down low hanging fruit use of sb_flags with socket buffer
  lock.

- Lock down low hanging fruit use of so_state with socket lock.

- Lock down low hanging fruit use of so_options.

- Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with
  socket buffer lock.

- Annotate situations in which we unlock the socket lock and then
  grab the receive socket buffer lock, which are currently actually
  the same lock.  Depending on how we want to play our cards, we
  may want to coallesce these lock uses to reduce overhead.

- Convert a if()->panic() into a KASSERT relating to so_state in
  soaccept().

- Remove a number of splnet()/splx() references.

More complex merging of socket and socket buffer locking to
follow.
2004-06-17 22:48:11 +00:00
Robert Watson
c0b99ffa02 The socket field so_state is used to hold a variety of socket related
flags relating to several aspects of socket functionality.  This change
breaks out several bits relating to send and receive operation into a
new per-socket buffer field, sb_state, in order to facilitate locking.
This is required because, in order to provide more granular locking of
sockets, different state fields have different locking properties.  The
following fields are moved to sb_state:

  SS_CANTRCVMORE            (so_state)
  SS_CANTSENDMORE           (so_state)
  SS_RCVATMARK              (so_state)

Rename respectively to:

  SBS_CANTRCVMORE           (so_rcv.sb_state)
  SBS_CANTSENDMORE          (so_snd.sb_state)
  SBS_RCVATMARK             (so_rcv.sb_state)

This facilitates locking by isolating fields to be located with other
identically locked fields, and permits greater granularity in socket
locking by avoiding storing fields with different locking semantics in
the same short (avoiding locking conflicts).  In the future, we may
wish to coallesce sb_state and sb_flags; for the time being I leave
them separate and there is no additional memory overhead due to the
packing/alignment of shorts in the socket buffer structure.
2004-06-14 18:16:22 +00:00
Robert Watson
310e7ceb94 Socket MAC labels so_label and so_peerlabel are now protected by
SOCK_LOCK(so):

- Hold socket lock over calls to MAC entry points reading or
  manipulating socket labels.

- Assert socket lock in MAC entry point implementations.

- When externalizing the socket label, first make a thread-local
  copy while holding the socket lock, then release the socket lock
  to externalize to userspace.
2004-06-13 02:50:07 +00:00
Warner Losh
7f8a436ff2 Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core
2004-04-05 21:03:37 +00:00
Robert Watson
32903c86e7 Conditionally acquire Giant when entering the socket layer via file
descriptor operations based on debug.mpsafenet, rather than acquiring
Giant unconditionally.
2004-03-29 01:55:32 +00:00
Poul-Henning Kamp
7c2d2efd58 Initialize struct fileops with C99 sparse initialization. 2003-06-18 18:16:40 +00:00
David E. O'Brien
677b542ea2 Use __FBSDID(). 2003-06-11 00:56:59 +00:00
Olivier Houchard
d6bf23783f Remove duplicate includes.
Submitted by:	Cyril Nguyen-Huu <cyril@ci0.org>
2003-02-20 03:26:11 +00:00
Alfred Perlstein
e7d6662f1b Do not allow kqueues to be passed via unix domain sockets. 2003-02-15 06:04:55 +00:00
Matthew Dillon
48e3128b34 Bow to the whining masses and change a union back into void *. Retain
removal of unnecessary casts and throw in some minor cleanups to see if
anyone complains, just for the hell of it.
2003-01-13 00:33:17 +00:00
Matthew Dillon
cd72f2180b Change struct file f_data to un_data, a union of the correct struct
pointer types, and remove a huge number of casts from code using it.

Change struct xfile xf_data to xun_data (ABI is still compatible).

If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary.  There are no operational changes in this
commit.
2003-01-12 01:37:13 +00:00
Alfred Perlstein
13438f6823 When compiling the kernel do not implicitly include filedesc.h from proc.h,
this was causing filedesc work to be very painful.
In order to make this work split out sigio definitions to thier own header
(sigio.h) which is included from proc.h for the time being.
2003-01-01 01:56:19 +00:00
Poul-Henning Kamp
6ce9c72c30 s/sokqfilter/soo_kqfilter/ for consistency with the naming of all
other socket/file operations.
2002-12-23 21:37:28 +00:00
Kelly Yancey
47baac87a6 Update the st_size reported via stat(2) to accurately reflect the amount
of data available to read for non-TCP sockets.

Reviewed by:	-net, -arch
Sponsored by:	NTT Multimedia Communications Labs
MFC after:	2 weeks
2002-11-01 21:31:13 +00:00
Robert Watson
b371c939ce Integrate mac_check_socket_send() and mac_check_socket_receive()
checks from the MAC tree: allow policies to perform access control
for the ability of a process to send and receive data via a socket.
At some point, we might also pass in additional address information
if an explicit address is requested on send.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-06 14:39:15 +00:00
Don Lewis
91e97a8266 In an SMP environment post-Giant it is no longer safe to blindly
dereference the struct sigio pointer without any locking.  Change
fgetown() to take a reference to the pointer instead of a copy of the
pointer and call SIGIO_LOCK() before copying the pointer and
dereferencing it.

Reviewed by:	rwatson
2002-10-03 02:13:00 +00:00
Robert Watson
d49fa1ca6e In continuation of early fileop credential changes, modify fo_ioctl() to
accept an 'active_cred' argument reflecting the credential of the thread
initiating the ioctl operation.

- Change fo_ioctl() to accept active_cred; change consumers of the
  fo_ioctl() interface to generally pass active_cred from td->td_ucred.
- In fifofs, initialize filetmp.f_cred to ap->a_cred so that the
  invocations of soo_ioctl() are provided access to the calling f_cred.
  Pass ap->a_td->td_ucred as the active_cred, but note that this is
  required because we don't yet distinguish file_cred and active_cred
  in invoking VOP's.
- Update kqueue_ioctl() for its new argument.
- Update pipe_ioctl() for its new argument, pass active_cred rather
  than td_ucred to MAC for authorization.
- Update soo_ioctl() for its new argument.
- Update vn_ioctl() for its new argument, use active_cred rather than
  td->td_ucred to authorize VOP_IOCTL() and the associated VOP_GETATTR().

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2002-08-17 02:36:16 +00:00
Robert Watson
ea6027a8e1 Make similar changes to fo_stat() and fo_poll() as made earlier to
fo_read() and fo_write(): explicitly use the cred argument to fo_poll()
as "active_cred" using the passed file descriptor's f_cred reference
to provide access to the file credential.  Add an active_cred
argument to fo_stat() so that implementers have access to the active
credential as well as the file credential.  Generally modify callers
of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which
was redundantly provided via the fp argument.  This set of modifications
also permits threads to perform these operations on behalf of another
thread without modifying their credential.

Trickle this change down into fo_stat/poll() implementations:

- badfo_poll(), badfo_stat(): modify/add arguments.
- kqueue_poll(), kqueue_stat(): modify arguments.
- pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to
  MAC checks rather than td->td_ucred.
- soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather
  than cred to pru_sopoll() to maintain current semantics.
- sopoll(): moidfy arguments.
- vn_poll(), vn_statfile(): modify/add arguments, pass new arguments
  to vn_stat().  Pass active_cred to MAC and fp->f_cred to VOP_POLL()
  to maintian current semantics.
- vn_close(): rename cred to file_cred to reflect reality while I'm here.
- vn_stat(): Add active_cred and file_cred arguments to vn_stat()
  and consumers so that this distinction is maintained at the VFS
  as well as 'struct file' layer.  Pass active_cred instead of
  td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics.

- fifofs: modify the creation of a "filetemp" so that the file
  credential is properly initialized and can be used in the socket
  code if desired.  Pass ap->a_td->td_ucred as the active
  credential to soo_poll().  If we teach the vnop interface about
  the distinction between file and active credentials, we would use
  the active credential here.

Note that current inconsistent passing of active_cred vs. file_cred to
VOP's is maintained.  It's not clear why GETATTR would be authorized
using active_cred while POLL would be authorized using file_cred at
the file system level.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
Robert Watson
9ca435893b In order to better support flexible and extensible access control,
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:

- Change fo_read() and fo_write() to accept "active_cred" instead of
  "cred", and change the semantics of consumers of fo_read() and
  fo_write() to pass the active credential of the thread requesting
  an operation rather than the cached file cred.  The cached file
  cred is still available in fo_read() and fo_write() consumers
  via fp->f_cred.  These changes largely in sys_generic.c.

For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:

- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
  pipe_read/write() now authorize MAC using active_cred rather
  than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
  VOP_READ/WRITE() with fp->f_cred

Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred.  Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not.  If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.

Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.

These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.

Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
Alfred Perlstein
7f05b0353a More caddr_t removal, make fo_ioctl take a void * instead of a caddr_t. 2002-06-29 01:50:25 +00:00
Seigo Tanimura
4cc20ab1f0 Back out my lats commit of locking down a socket, it conflicts with hsu's work.
Requested by:	hsu
2002-05-31 11:52:35 +00:00
Seigo Tanimura
243917fe3b Lock down a socket, milestone 1.
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
  socket buffer. The mutex in the receive buffer also protects the data
  in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

  - so_count
  - so_options
  - so_linger
  - so_state

o Remove *_locked() socket APIs.  Make the following socket APIs
  touching the members above now require a locked socket:

 - sodisconnect()
 - soisconnected()
 - soisconnecting()
 - soisdisconnected()
 - soisdisconnecting()
 - sofree()
 - soref()
 - sorele()
 - sorwakeup()
 - sotryfree()
 - sowakeup()
 - sowwakeup()

Reviewed by:	alfred
2002-05-20 05:41:09 +00:00
Alfred Perlstein
628abf6c69 Giant pushdown for read/write/pread/pwrite syscalls.
kern/kern_descrip.c:
Aquire Giant in fdrop_locked when file refcount hits zero, this removes
the requirement for the caller to own Giant for the most part.

kern/kern_ktrace.c:
Aquire Giant in ktrgenio, simplifies locking in upper read/write syscalls.

kern/vfs_bio.c:
Aquire Giant in bwillwrite if needed.

kern/sys_generic.c
Giant pushdown, remove Giant for:
   read, pread, write and pwrite.
readv and writev aren't done yet because of the possible malloc calls
for iov to uio processing.

kern/sys_socket.c
Grab giant in the socket fo_read/write functions.

kern/vfs_vnops.c
Grab giant in the vnode fo_read/write functions.
2002-03-15 08:03:46 +00:00
Alfred Perlstein
426da3bcfb SMP Lock struct file, filedesc and the global file list.
Seigo Tanimura (tanimura) posted the initial delta.

I've polished it quite a bit reducing the need for locking and
adapting it for KSE.

Locks:

1 mutex in each filedesc
   protects all the fields.
   protects "struct file" initialization, while a struct file
     is being changed from &badfileops -> &pipeops or something
     the filedesc should be locked.

1 mutex in each struct file
   protects the refcount fields.
   doesn't protect anything else.
   the flags used for garbage collection have been moved to
     f_gcflag which was the FILLER short, this doesn't need
     locking because the garbage collection is a single threaded
     container.
  could likely be made to use a pool mutex.

1 sx lock for the global filelist.

struct file *	fhold(struct file *fp);
        /* increments reference count on a file */

struct file *	fhold_locked(struct file *fp);
        /* like fhold but expects file to locked */

struct file *	ffind_hold(struct thread *, int fd);
        /* finds the struct file in thread, adds one reference and
                returns it unlocked */

struct file *	ffind_lock(struct thread *, int fd);
        /* ffind_hold, but returns file locked */

I still have to smp-safe the fget cruft, I'll get to that asap.
2002-01-13 11:58:06 +00:00
Matthew Dillon
b1e4abd246 Give struct socket structures a ref counting interface similar to
vnodes.  This will hopefully serve as a base from which we can
expand the MP code.  We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
2001-11-17 03:07:11 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Bill Fenner
c3cb7e5d7a Don't bother passing p to rtioctl just so it can fail to pass it to mrt_ioctl 2001-07-25 20:15:28 +00:00
Jonathan Lemon
608a3ce62a Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
Chris Costello
d41c16130b Instead of just blindly setting -rw-rw-rw-:
o Set access mode to -r--r--r-- if SS_CANTRCVMORE is set and the receive
  buffer is empty.

o Set access mode to --w--w--w- is SS_CANTSENDMORE is set.

Discussed with:	alfred
2000-07-02 23:56:45 +00:00
Chris Costello
417779230b Report -rw-rw-rw file access modes in soo_stat.
Reviewed by:	alfred
2000-07-02 19:31:00 +00:00