Commit Graph

57 Commits

Author SHA1 Message Date
Adrian Chadd
617f8b101e [net80211] RX parameter shuffle in net80211 in preparation for 4x4 NICs and 160MHz channels.
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
  this isn't freebsd specific anymore.

* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
  MAX_CHAINS around so it can be used in the right spot.

* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
  the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.

* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.

Tested:

* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode

TODO:

* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
  at that point.

Note:

* This breaks the driver and ifconfig ABI; please recompile  the kernel,
  ifconfig and wpa_supplicant/hostapd.
2017-02-20 02:08:08 +00:00
Andriy Voskoboinyk
4a19d71238 net80211 + drivers: convert to ieee80211_crypto_get_key_wepidx().
Proposed by:	adrian
2016-12-07 22:16:07 +00:00
Andriy Voskoboinyk
5216e2b620 mwl: switch to ieee80211_add_channel*(). 2016-05-19 22:28:46 +00:00
Andriy Voskoboinyk
a54e0911c4 mwl: drop unneeded NULL pointer check.
mh_streams[] is a fixed-length array, not a pointer.
2016-05-17 20:53:56 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Adrian Chadd
dd8a5c3593 [mwl] s/struct device/device_t/
Submitted by:	kmacy
2016-05-02 04:15:15 +00:00
Andriy Voskoboinyk
6459bd2843 net80211: enable promiscuous mode state change for non-monitor/ahdemo modes
- Allow to enable/disable promiscuous mode when:
  * interface is not a member of bridge, or;
  * request was issued by user (ifconfig wlan0 promisc), or;
  * interface is in MONITOR or AHDEMO mode.
- Drop local workarounds in mwl(4) and malo(4).

Tested with:
- Intel 3945BG, STA mode;
- RTL8188CUS, MONITOR mode;

Reviewed by:	adrian
Differential Revision:	https://reviews.freebsd.org/D5472
2016-04-21 05:47:47 +00:00
Adrian Chadd
d957a93abe net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output().
This doesn't free the mbuf upon error; the driver ic_raw_xmit method is still
doing that.

Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3774
2015-10-12 04:55:20 +00:00
Adrian Chadd
210ab3c258 net80211: drop ieee80211_beacon_offsets parameter from ieee80211_beacon_alloc() and ieee80211_beacon_update()
Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3659
2015-10-03 22:12:25 +00:00
Adrian Chadd
bc813c40bf net80211: drop redundant 3rd parameter from iv_key_set().
The MAC can be fetched from the key struct.

I added the ndis updates to make it compile.

Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3657
2015-10-03 21:48:27 +00:00
Adrian Chadd
0cf00015be net80211: include one copy of struct ieee80211_beacon_offsets into ieee80211vap
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3658
2015-09-22 06:34:07 +00:00
Adrian Chadd
d6166def28 net80211 & wireless drivers: remove duplicate defines (noop)
* IEEE80211_DIR_DSTODS(wh) -> IEEE80211_IS_DSTODS(wh).
* N(a) -> nitems(a).
* Remove LE_READ_2(p)/LE_READ_4(p) definitions (and include ieee80211_input.h instead).
* <drvname>_TXOP_TO_US(txop) -> IEEE80211_TXOP_TO_US(txop).
* Put IEEE80211_RV(v) into ieee80211_proto.h and remove local RV(v) definitions.

Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3705
2015-09-22 02:44:59 +00:00
Gleb Smirnoff
7a79cebfba Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by:	adrian
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-08-27 08:56:39 +00:00
Adrian Chadd
ba2c1fbc03 Revert the wifi ifnet changes until things are more baked and tested.
* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.
2015-08-08 01:10:17 +00:00
Gleb Smirnoff
7a3151955b Fix !MWL_DEBUG build. 2015-08-07 12:34:20 +00:00
Gleb Smirnoff
79d2c5e857 Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision:	D2655, D2740
Sponsored by:	Nginx, Inc.
Sponsored by:	Netflix
2015-08-07 11:43:14 +00:00
Gleb Smirnoff
272f6ade9b Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 19:53:29 +00:00
Gleb Smirnoff
59686fe935 Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 18:50:26 +00:00
Gleb Smirnoff
c8550c0278 Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 13:51:13 +00:00
Jung-uk Kim
fd90e2ed54 CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head.  However, it is continuously misused as the mpsafe argument
for callout_init(9).  Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision:	https://reviews.freebsd.org/D2613
Reviewed by:	jhb
MFC after:	2 weeks
2015-05-22 17:05:21 +00:00
Marius Strobl
2706e8723d Fix compilation with GCC in the PAE case.
MFC after:	3 days
2015-02-10 21:33:32 +00:00
Adrian Chadd
e03905177a Use the correct macro for listing the maximum bus space size.
Without this, it fails to compile on i386 PAE builds.
2014-12-17 21:26:25 +00:00
Gleb Smirnoff
2c705cad05 Mechanically convert to if_inc_counter(). 2014-09-18 20:18:55 +00:00
Gleb Smirnoff
15c28f87b8 All mbuf external free functions never fail, so let them be void.
Sponsored by:	Nginx, Inc.
2014-07-11 13:58:48 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
John Baldwin
f07894dbde Don't destroy bus_dma maps created by bus_dmamem_alloc(). In some cases,
don't create a map before calling bus_dmamem_alloc() (such maps were
leaked).  It is believed that the extra destroy of the map was generally
harmless since bus_dmamem_alloc() often uses special maps for which
bus_dmamap_destroy() is a no-op (e.g. on x86).

Reviewed by:	scottl
2014-06-10 20:25:45 +00:00
Kevin Lo
5945b5f5ab Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by:	adrian, rpaulo
2014-01-08 08:06:56 +00:00
Dimitry Andric
d4bd7d166a In sys/dev/mwl/if_mwl.c, put the static RD4() function under #ifdef
MWL_DEBUG guards, since it only used in DPRINTF statements.

MFC after:	3 days
2013-12-25 14:48:27 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Andre Oppermann
bb25e5ab00 Give (*ext_free) an int return value allowing for very sophisticated
external mbuf buffer management capabilities in the future.

For now only EXT_FREE_OK is defined with current legacy behavior.

Sponsored by:	The FreeBSD Foundation
2013-08-25 10:57:09 +00:00
Andre Oppermann
9a73687609 Add an mbuf pointer parameter to (*ext_free) to give the external
free function access to the mbuf the external memory was attached
to.

Mechanically adjust all users to include the mbuf parameter.

This fixes a long standing annoyance for external free functions.
Before one had to sacrifice one of the argument pointers for this.

Sponsored by:	The FreeBSD Foundation
2013-08-24 16:57:44 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Adrian Chadd
baf94755c0 Fix the RX free list locking creation and destruction to be consistent
even in the face of errors.

If the RX descriptor list fails, the RX lock won't be initialised, but
then the DMA free path wil try freeing it.

This commit is brought to you by a working mwl(4).
2012-04-17 04:52:57 +00:00
Adrian Chadd
865a6f735d Add missing #include 2012-04-17 04:31:50 +00:00
Adrian Chadd
2aa563dfeb Migrate the net80211 TX aggregation state to be from per-AC to per-TID.
TODO:

* Test mwl(4) more thoroughly!

Reviewed by:	bschmidt (for iwn)
2012-04-15 20:29:39 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Adrian Chadd
88e428c6bc Revert r220907 and r220915.
Changing the size of struct ieee80211_mimo_info changes
the STA info data, breaking ifconfig in general.
2011-04-22 00:44:27 +00:00
Adrian Chadd
5689734183 Convert to new ieee80211_mimo_info format. 2011-04-21 08:20:56 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Bernhard Schmidt
c09bfb13d7 The mwl's HAL manages an array of MWL_MBSS_MAX VAPs where the first 8 are
supposed to be APs and the later 24 are pre-configured as STAs. A wrong
condition during initialization is responsible for not configuring the last
8 array members. This is results in being able to create more than 8,
possible uninitialized, AP-VAPs.

PR:		kern/153549
Submitted by:	Erik Fonnesbeck <efonnes at gmail.com>
MFC after:	2 weeks
2010-12-31 09:50:15 +00:00
Bernhard Schmidt
571d92b012 Fix firmware module dependencies.
malo and mwl use the firmware framework to access firmware images.
Depending on the firmware modules itself is not required and in this
case even wrong because no modules with those names exist.

Pointed out by:	brucec
MFC after:	1 week
2010-09-10 08:11:48 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
John Baldwin
7cf545d0a1 - Add a private timer to drive the transmit watchdog instead of using
if_watchdog and if_timer.
- Fix some issues in detach for sn(4), ste(4), and ti(4).  Primarily this
  means calling ether_ifdetach() before anything else.
2009-11-19 22:06:40 +00:00
Rui Paulo
bcda02c3e4 Don't use BUS_DMA_ALLOCNOW as that causes the attachment to fail on
Cambria boards.

MFC after:	2 months
2009-10-22 12:48:17 +00:00
Rui Paulo
0be3021195 Replace 'can not' with 'cannot' so that we use 'cannot' everywhere. 2009-09-23 17:48:16 +00:00