kernel. This will be used for passing in things like the system table
from EFI or other similar metadata that can be used by the kernel to
communicate with the firmware.
The ci20 port (by kan@) is going to reuse almost all of the intrng code
since the SoC in question looks suspiciously like someone took an ARM
SoC design and replaced the ARM core with a MIPS core.
* migrate out the code;
* rename ARM_ -> INTR_;
* rename arm_ -> intr_;
* move the interrupt flush routine from intr.c / intrng.c into
arm/machdep_intr.c - removing the code duplication and removing
the ARM specific bits from here.
Thanks to the Star Wars: The Force Awakens premiere line for allowing
me a couple hours of quiet time to finish the universe builds.
Tested:
* make universe
TODO:
* The structure definitions in subr_intr.c still includes machine/intr.h
which requires one duplicates all of the intrng definitions in
the platform code (which kan has done, and I think we don't have to.)
Instead I should break out the generic things (function declarations,
common intr structures, etc) into a separate header.
* Kan has requested I make the PIC based IPI stuff optional.
I don't know what alternate universe I was inhabiting when I wrote it
originally, but apparently the basic workings of mathematics were different
than in this universe. I also can't explain how it ever worked, except "by
accident", because completely bogus values were being written into the
divisor register.
Different revisions support different operations. Refer to Intel
External Design Specifications to figure out what your hardware
supports.
Sponsored by: EMC / Isilon Storage Division
instead of GMBUS access for I2C transfers. The GMBUS driver falls back
to this mode when a transfer times out. However, the first transfer to
timeout was sending the request back to itself resulting in an panic due
to recursing on a lock. Fix it to forward the request on to the proper
device. This appears to have been accidentally changed in r277487.
Reported by: Joe Maloney <jmaloney@pcbsd.org>
Reviewed by: adrian, dumbbell, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D4599
It turns out the callers of vm_page_replace know exactly which page they are
replacing and would like to assert about it. Change those from hard panics to
KASSERTs, and provide them with a wrapper so they don't have to deal with
warnings from an INVARIANTS-dependent dead store of the return value of
vm_page_replace.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: alc, kib (earlier version)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4497
the #address-cells property set. For this we need to read more data before
the parent interrupt description.
this is only enabled on arm64 for now as it's not quite compliant with the
ePAPR spec. We should use a default of 2 where the #address-cells property
is missing, however this will need further testing across architectures.
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D4518
variable set rather than reading from kernel memory.
This also makes the -z (zero) flag work correctly
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D4591
Rather than pushing all eight possible arguments into dtrace_probe()'s
stack frame, make the syscall_args struct for the current syscall available
via the current thread. Using a custom getargval method for the systrace
provider, this allows any syscall argument to be fetched, even in kernels
that have modified the maximum number of system call arguments.
Sponsored by: EMC / Isilon Storage Division
With the new VOP_GETPAGES() KPI the "count" argument counts pages already,
and doesn't need to be translated from bytes to pages.
While here make it consistent that *rbehind and *rahead are updated only
if we doesn't return error.
Pointy hat to: glebius
- Use SDT_PROBE<N>() instead of SDT_PROBE(). This has no functional effect
at the moment, but will be needed for some future changes.
- Don't hardcode the module component of the probe identifier. This is
set automatically by the SDT framework.
MFC after: 1 week
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
LLDB is usable for userland core file and live debugging on amd64, and
for userland core file debugging on arm64. In general it works at least
as well on FreeBSD as our in-tree gdb version, so enable it by default
to allow for broader use and testing.
An LLDB tutorial is available at http://lldb.llvm.org/tutorial.html, and
a table mapping GDB commands to LLDB commands can be found at
http://lldb.llvm.org/lldb-gdb.html .
LLDB also has some level of support for FreeBSD on arm, mips, i386,
and powerpc, but is not yet ready to have them enabled by default.
Reviewed by: gnn
Relnotes: Yes
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
The EFI memory map may change before or during the first
ExitBootServices call. In that case ExitBootServices returns an error,
and GetMemoryMap and ExitBootServices must be retried.
Glue together calls to GetMemoryMap(), ExitBootServices() and storage of
(now up-to-date) MODINFOMD_EFI_MAP metadata within a single function.
That new function - bi_add_efi_data_and_exit() - uses space previously
allocated in bi_load_efi_data() to store the memory map (it will fail if
that space is too short). It handles re-calling GetMemoryMap() once to
update the map key if necessary. Finally, if ExitBootServices() is
successful, it stores the memory map and its header as MODINFOMD_EFI_MAP
metadata.
ExitBootServices() calls are now done earlier, from within arch-
independent bi_load() code.
PR: 202455
Submitted by: Ganael LAPLANCHE
Reviewed by: kib
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4296
Before the change, things like lle state were queried via
SIOCGNBRINFO_IN6 by ndp(8) for _each_ lle entry in dump.
This ioctl was added in 1999, probably to avoid touching rtsock code.
This change maps SIOCGNBRINFO_IN6 data to standard rtsock dump the
following way:
expire (already) maps to rtm_rmx.rmx_expire
isrouter -> rtm_flags & RTF_GATEWAY
asked -> rtm_rmx.rmx_pksent
state -> rtm_rmx.rmx_state (maps to rmx_weight via define)
Reviewed by: ae
risk leaving the connection in an indeterminate state if the server fails
to send a chunk delimiter. Depending on the application and on the sizes
of the preceding chunks, the result can be anything from missing data to a
segfault. With this patch, it will be reported as a protocol error.
PR: 204771
MFC after: 1 week
If source of ARP request didn't pass the routing check
(e.g. not in directly connected network), be polite and
still answer the request instead of dropping frame.
Reported by: quadro at irc@rusnet
into the FreeBSD test suite
There's no functional change with these testcases; they're purposely
being left in TAP format for the time being
Other testcases which crash on amd64/i386 as-is have not been
integrated yet (they need to be retested on a later version of
CURRENT, as I haven't used i386 in some time)
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
buffer for each block number in the range with gbincore(), look up the
next instantiated buffer with the logical block number which is
greater or equal to the next lblkno. This significantly speeds up the
iteration for sparce-populated range.
Move the iteration into new helper bnoreuselist(), which is structured
similarly to flushbuflist().
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
the type stability of the buffers memory. Instead of memoizing
pointer to the next buffer and validating it, remember the next
logical block number in the bo list and re-lookup.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
lib/libc/tests/nss
- Convert the testcases to ATF
- Do some style(9) cleanups:
-- Sort headers
-- Apply indentation fixes
-- Remove superfluous parentheses
- Explicitly print out debug printfs for use with `kyua {debug,report}`; for
items that were overly noisy, they've been put behind #ifdef DEBUG
conditionals
- Fix some format strings
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
testing for kernel features via the feature_present(3) libcall
The semantics are similar to the other macros in the header (skip
testcase with ATF macro; exit with appropriate exit code with the
PLAIN macro)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
