Commit Graph

516 Commits

Author SHA1 Message Date
Poul-Henning Kamp
2b69c2d76a Remove the unused ioctl routine. 2003-04-12 08:44:54 +00:00
Alan Cox
270086ec64 Sufficient access checks are performed by vmapbuf() that calling useracc()
is pointless.  Remove the calls to useracc().
2003-04-06 22:21:03 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Kenneth D. Merry
461dddba27 Clean up dynamically allocated sysctl variables when we run dacleanup() and
cdcleanup().  This fixes sysctl problems ("can't re-use a leaf") when
someone adds another peripheral at the same unit number.  (e.g. rescan da0,
it goes away, then rescan again and da0 comes back, but since we haven't
cleaned up the sysctl variables from the last da0 instance, we can't
register the variables for the new instance under the same name.)

Reported by:	njl
Tested by:	njl
2003-03-26 04:38:39 +00:00
Poul-Henning Kamp
7194d335cf Run a revision of the devstat interface:
Kernel:

Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale.  This makes the
device statistics code oblivious to clock steps.

Change timestamps to bintime format, they are cheaper.

Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively.  This removes the locking constraint on
devstat.

Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.

Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).

Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path.  In the up path we accumulate the timeslice in busy_time
and update busy_from.

Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].

Userland:

Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.

Change devstat_compute_etime() to operate on struct bintime.

Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.

Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.

Bump __FreeBSD_version to 500107

Review & Collaboration by:	ken
2003-03-15 21:59:06 +00:00
Poul-Henning Kamp
0be3115328 Don't use the devstat->busy_count for state decisions in the device
drivers.  Doing so imposes atomicity and locking constraints on the
devstat API.

By:	ken
2003-03-15 11:00:56 +00:00
Poul-Henning Kamp
1ecc485c1b Call devstat_start_transaction_bio() instead of devstat_start_transaction() 2003-03-15 10:50:44 +00:00
Nate Lawson
bdc321a648 Quirk for SanDisk ImageMate II compact flash reader
PR:		kern/47877
Submitted by:	Mike Durian <durian@boogie.com>
MFC after:	3 days
2003-03-11 02:07:17 +00:00
Nate Lawson
2a7e0bee37 Quirk for Pentax Optio 230 USB camera. Note that other products probably
use the underlying AsahiOptical USB chip and thus this quirk may need to
be generalized in the future.

PR:		kern/46369
Submitted by:	Tim Vanderhoek <vanderh@ecf.utoronto.ca>
MFC After:	3 days
2003-03-11 01:55:11 +00:00
Poul-Henning Kamp
a9d2245ea8 Allocate the devstat structure with devstat_new_entry(). 2003-03-08 21:44:46 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
e4d0d8c84a msg 2003-02-26 20:53:28 +00:00
Poul-Henning Kamp
f64bbf8b61 NO_GEOM cleanup:
Move to "struct disk *" centric api.
2003-02-25 22:06:21 +00:00
Poul-Henning Kamp
2c6b49f6af NO_GEOM cleanup:
Retire the "d_dump_t" and use the "dumper_t" type instead.

Dumper_t takes a void * as first arg which is more general than the
dev_t taken by d_dump_t.  (Remember: we could have net-dumpers if
somebody wrote us one!)

Define the convention for GEOM controlled disk devices to be that the
first argument to the dumper function is the struct disk pointer.

Change device drivers accordingly.
2003-02-21 19:00:48 +00:00
Poul-Henning Kamp
b82ff75854 NO_GEOM cleanup:
Change the argument to disk_destroy() to be the same struct disk * as
disk_create() takes.

This enables drivers to ignore the (now) bogus dev_t which disk_create()
returns.
2003-02-21 15:13:26 +00:00
Kenneth D. Merry
56eac725a3 Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix
a number of related problems along the way.

 - Automatically detect CDROM drives that can't handle 6 byte mode
   sense and mode select, and adjust our command size accordingly.
   We have to handle this in the cd(4) driver (where the buffers are
   allocated), since the parameter list length is different for the
   6 and 10 byte mode sense commands.

 - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM
   and in the umass(4) driver, since there's no way for that to work
   properly.

 - Add a quirk entry for CDROM drives that just hang when they get a 6
   byte mode sense or mode select.  The reason for the quirk must be
   documented in a PR, and all quirks must be approved by
   ken@FreeBSD.org.  This is to make sure that we fully understand why
   each quirk is needed.  Once the CAM_NEW_TRAN_CODE is finished, we
   should be able to remove any such quirks, since we'll know what
   protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether
   we should use 6 or 10 byte mode sense/select commands.

 - Change the way the da(4) handles the no_6_byte sysctl.  There is
   now a per-drive sysctl to set the minimum command size for that
   particular disk.  (Since you could have multiple disks with
   multiple requirements in one system.)

 - Loader tunable support for all the sysctls in the da(4) and cd(4)
   drivers.

 - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long
   time ago).

 - Add a media validation routine (cdcheckmedia()) to the cd(4)
   driver, to fix some problems bde pointed out a long time ago.  We
   now allow open() to succeed no matter what, but if we don't detect
   valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT
   ioctls.

 - The media validation routine also reads the table of contents off
   the drive.  We use the table of contents to implement the
   CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command.  The
   PLAY AUDIO TRACK INDEX command that we previously used was
   deprecated after SCSI-2.  It works in every SCSI CDROM I've tried,
   but doesn't seem to work on ATAPI CDROM drives.  We still use the
   play audio track index command if we don't have a valid TOC, but
   I suppose it'll fail anyway in that case.

 - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so
   that we can specify the minimum command length.

 - Fix a couple of formatting problems in the sense printing code.

MFC after: 	4 weeks
2003-02-21 06:19:38 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Poul-Henning Kamp
2c71b5639f Announce our ability to do DFLTPHYS sized transfers. 2003-02-11 21:30:28 +00:00
Nate Lawson
4d8d31a7b4 Quirk for Lexar Media Jumpdrive
PR:		kern/47006
Tested by:	George Hartzell <hartzell@kestrel.alerce.com>
MFC after:	1 week
2003-02-09 21:49:45 +00:00
Poul-Henning Kamp
936cc4614b Rename bio_linkage to the more obvious bio_parent.
Add bio_t0 timestamp, and include <sys/time.h> where needed
2003-02-07 21:09:51 +00:00
Alfred Perlstein
8deebb0160 Consolidate MIN/MAX macros into one place (param.h).
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-02-02 13:17:30 +00:00
Poul-Henning Kamp
1686ac18f9 NO_GEOM cleanup: retire disk_invalidate() 2003-01-30 19:43:50 +00:00
Nate Lawson
537a265865 Remove redundant printf from targbhasync() since all places that return an
error do their own, more useful printf.
2003-01-23 21:55:12 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Justin T. Gibbs
b085809de9 Add definitions for the task management codes sent in SPI4
command information units.
2003-01-20 18:05:46 +00:00
Matthew Dillon
2d5c7e4506 Close the remaining user address mapping races for physical
I/O, CAM, and AIO.  Still TODO: streamline useracc() checks.

Reviewed by:	alc, tegge
MFC after:	7 days
2003-01-20 17:46:48 +00:00
Nate Lawson
031bacf859 kernel:
* Fix a bug where devices weren't cleaned up on close(): CAM_REQ_CMP != 0

user:
* Increase timeout in usermode to CAM_TIME_INFINITY.  The initiator is in
  charge of timeouts and the value was in ms, not seconds.
* Bring two debugging printfs under the debug flag
* Clean up man page to show increased testing on isp(4)

Submitted by:	gibbs (bugfixes)
2003-01-16 00:24:29 +00:00
Nate Lawson
ec693c0e79 Quirk for Sony USB disk-on-key device.
PR:		kern/46386
Submitted by:	dillon
MFC after:	3 days
2003-01-13 05:09:07 +00:00
Peter Wemm
586864e29d Back out last commit. 2003-01-06 19:30:21 +00:00
Peter Wemm
9bae481c37 Move dashutdown from SHUTDOWN_PRI_DEFAULT to SHUTDOWN_PRI_FIRST.
Otherwise, the scsi devices that it is trying to issue commands to may
have gone away.  This is what caused shutdown to hang on ia64 systems
with mpt scsi controllers.  The bus system has torn down the device tree
and reset the mpt controller etc, and suddenly along comes dashutdown
and wants to issue a few more scsi commands....  <HANG!>

This shouldn't work on i386 either, but it seems to work solely due
to luck.
2003-01-06 08:28:15 +00:00
Jens Schweikhardt
d64ada501a Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
Nate Lawson
6d82c6a622 Quirk for Memorybird pen drive
PR:		kern/34712
Submitted by:	Oliver Fromme <olli@lurza.secnetix.de>
MFC after:	3 days
2002-12-18 21:47:52 +00:00
Tom Rhodes
5461a2d2d0 The HP DAT 40 tape drive should be able to handle variable block sizes.
But for some reason the block size is different when a different type of
tape is placed in the drive.  This commit fixes that.

PR:		46209
Submitted by:	Alex Wang <alex@alexwang.com>
Approved by:	mjacob
2002-12-16 17:40:17 +00:00
Yaroslav Tykhiy
3aa2a1d0e4 Clear the "device open" flag in daopen() before returning a error,
so the device won't stay marked as open whereas it isn't.

Approved by:	re, njl
MFC after:	1 week
2002-12-12 18:09:35 +00:00
Yaroslav Tykhiy
b7c8a7976f Release the reference to the peripheral if returning a error.
That reference is to be held only if daopen() has been successful
and until daclose() releases it.  daclose() won't be called if
daopen() has failed, though.

Approved by:	re, njl
MFC after:	1 week
2002-11-29 15:40:10 +00:00
Nate Lawson
37dce299a6 Remove unnecessary includes and add sys/{lock,mutex}.h
Submitted by:	bde
Approved by:	re (previously)
2002-11-25 19:28:05 +00:00
Nate Lawson
677152abc6 Whitespace cleanup that was missed by quirks commit 1.114 2002-11-23 23:25:56 +00:00
Nate Lawson
c3bf92aa58 Allow acd(4) and cd(4) to support old behavior for CDRIOC*SPEED ioctls.
If the value from the user is less than 177, assume it is a multiple of
a single speed CDROM and convert to KB/sec.

No complaints from:	sos
Reviewed by:	ken
Approved by:	re
MFC after:	1 day
2002-11-23 22:51:50 +00:00
Nate Lawson
a35e039f69 Update quirks, adding PR references and fixing a capitalization mismatch.
PR:		kern/45494
Approved by:	re
2002-11-23 22:39:42 +00:00
Nate Lawson
c38b150ae4 New SCSI target emulator code
This code allows a user program to enable target mode on a SIM and
then emulate any number of devices (disks, tape drives, etc.)  All
decisions about device behavior (UA, CA, inquiry response) are left
to the usermode program and the kernel driver is merely a conduit
for CCBs.  This enables multiple concurrent target emulators, each
using its own backing store and IO model.

Also included is a user program that emulates a disk (RBC) using a
file as a backing store.  This provides functionality similar to
md(4) at the CAM layer.

Code has been tested on ahc(4) and should also work on isp(4) (and
other SIMs that gain target mode support).  It is a complete rewrite
of /sys/cam/scsi_target* and /usr/share/examples/scsi_target.

Design, comments from:	gibbs
Supported by:		Cryptography Research
Approved by:		re
2002-11-22 22:55:51 +00:00
Warner Losh
e3c29144fe Panic message strings do not need a trailing \n.
Reviewed by: ken
2002-11-14 05:35:57 +00:00
Warner Losh
ae01a5394a Panic message should end with \n.
Reviewed by: ken a while ago.
2002-11-14 05:03:11 +00:00
Alfred Perlstein
29f194457c Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
2002-11-09 12:55:07 +00:00
Nate Lawson
76ba4ecdad * Add CDRIOC{READ,WRITE}SPEED ioctls to cd(4). Units are in KB/sec.
* Change atapi-cd ioctls to use the same units.
* Change burncd, cdcontrol to convert CDROM speed to KB/sec before
calling the ioctl.  Add a "max" speed option for their command lines.

This change does not break ABI but does change the units passed through
the ioctl so 3rd party software that uses cdrio.h will have to convert
(most likely by multiplying CDROM speed by 177 to get KB/s).

PR:		kern/36845
Submitted by:	Philipp Mergenthaler <p@i609a.hadiko.de> (CAM ioctls)
Reviewed by:	sos, ken
MFC after:	1 month
2002-10-18 22:03:39 +00:00
Jim Pirzyk
669dc4a5e7 Backout my previous "brain cramp" commit.
Requested by: Most developers
Apologies to: Most developers, with special note to <ken@kdm.org>
Collabroation in the future with: Kenneth D. Merry <ken@kdm.org>
2002-10-18 04:53:46 +00:00
Jim Pirzyk
c463814756 Changed the scsi mode command to use 10 bytes scsi commands instead
of the 6 byte ones.  This helps with using a IDE cdrom behind a USB
interface.

PR: kern/43885
2002-10-17 23:37:03 +00:00
Nate Lawson
9dbcd1ae75 Quirk for HP 315 USB Digital Camera
Submitted by:	Keith White <kwhite@uottawa.ca>
PR:		kern/41010

MFC after:	1 week
2002-10-17 18:04:41 +00:00
Poul-Henning Kamp
8429f03018 Trapdoor access to cd%da and cd%c so they still work, but do not let them
show up in /dev.
2002-10-11 10:35:17 +00:00