Remove the unused syscall_(de)register() functions in favor of the
better documented and easier to use syscall_helper_(un)register(9)
functions.
The default and freebsd32 versions differed in which array of struct
sysents they used and a few missing updates to the 32-bit code as
features were added to the main code.
Reviewed by: cem
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14337
Carousel storage doesn't need to happen in the menu module, and indeed
storing it there introduces a circular reference between drawer and menu
that only works because of global pollution in loader.lua.
Carousel choices generally map to config entries anyways, making it as good
of place as any to store these. Move {get,set}CarouselIndex functionality
out into config so that drawer and menu may both use it. If we had more
carousel functionality, it might make sense to create a carousel module, but
this is not the case.
If we failed to execute the input line as pure lua, run the command through
parse for consistent argument parsing. Pass the parsed arguments through to
a global "cli_execute" written in Lua, which is expected to either handle it
or pass it back through to interp_builtin_cmd (via loader.command).
lua-handled cli commands will then exist as globals in whatever module they
most belong in, and invocations at the loader prompt will magically dispatch
to them if they exist.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14450
We follow pretty closely the following structure of a module:
1. Copyright notice
2. Module requires
3. Module local declarations
4. Module local definitions
5. Module exports
6. return
Re-organize the one-offs (config/drawer) and denote the start of module
exports with a comment.
Declare these adjacent to the local definitions at the top of the module,
and make sure they're actually declared local to pollute global namespace a
little bit less.
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
On POWER8 architecture there is a timer with 512Mhz frequency.
It has about 1,95ns period, but it is rounded to 1ns which is not accurate.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Reviewed by: wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14433
Currently Hypervisor Emulation Assistance interrupt is unhandled.
Executing an undefined instruction in userland triggers kernel panic.
Handle this the same way as Facility Unavailable Interrupt - send
SIGILL signal to userspace.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: nwhitehorn, pdk@semihalf.com, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14437
The intent of this guideline is to avoid creating global variables in module
scope. Its main purpose is to serve as a reminder that variables at module
scope also need to be declared.
We want to avoid global variables in general, but this is easier to mess up
when designing things in the module scope.
illumos/illumos-gate@48bbca816848bbca8168https://www.illumos.org/issues/7812
This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Daniel Hoffman <dj.hoffman@delphix.com>
This refactor makes it straightforward to add new logos for drawing and
organizes logo definitions in a logical manner.
The graphic to be drawn for each logo may again be modified outside of
drawer, but it must be done on a case-by-case basis as a modification to the
loader_logo.
As part of an effort to slowly reduce our exports overall to a set of stable
properties/functions, go ahead and reduce what drawer exposes to others.
The graphics should generally not be modified on their own, but their
position could be modified if additional grahics also need to be drawn.
Export position/shift information, but leave the actual graphic local to
the module.
The next step will be to create a 'menudef' that gets exported instead, with
each entry in the menudef table describing the graphic to be drawn along
with specific positioning information.
Pull out specialized naming behavior into drawer.menu_name_handlers. This is
currently only needed for the carousel entry, where naming is based on the
current choice and the menu item purposefully does not store this state.
The setup was designed so that every type can have a special name handler,
and the default action is to simply use the result of entry.name().
This is a bit cleaner than our former method of an if ... else chain of
handlers. Store handlers in the menu.handlers table so that they may be
added to or removed dynamically.
All handlers take the current menu and selected entry as parameters, and
their return value indicates whether the menu processor should continue or
not. An omitted return value or 'true' will indicate that we should
continue, while returning 'false' will indicate that we should exit the
current menu.
The omitted return value behavior is due to continuing the loop being the
more common situation.
There is a proctree -> allproc ordering established.
Most of the time it is either xlock -> xlock or slock -> slock.
On fork however there is a slock -> xlock pair which results in
pathological wait times due to threads keeping proctree held for
reading and all waiting on allproc. Switch this to xlock -> xlock.
Longer term fix would get rid of proctree in this place to begin with.
Right now it is necessary to walk the session/process group lists to
determine which id is free. The walk can be avoided e.g. with bitmaps.
The exit path used to have one place which dealt with allproc and
then with proctree. Move the allproc acquire into the section protected
by proctree. This reduces contention against threads waiting on proctree
in the fork codepath - the fork proctree holder does not have to wait
for allproc as often.
Finally, move tidhash manipulation outside of the area protected by
either of these locks. The removal from the hash was already unprotected.
There is no legitimate reason to look up thread ids for a process still
under construction.
This results in about 50% wait time reduction during -j 128 package build.
Provide multiple clean queues partitioned into 'domains'. Each domain manages
its own bufspace and has its own bufspace daemon. Each domain has a set of
subqueues indexed by the current cpuid to reduce lock contention on the cleanq.
Refine the sleep/wakeup around the bufspace daemon to use atomics as much as
possible.
Add a B_REUSE flag that is used to requeue bufs during the scan to approximate
LRU rather than locking the queue on every use of a frequently accessed buf.
Implement bufspace_reserve with only atomic_fetchadd to avoid loop restarts.
Reviewed by: markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14274
Building the swapped welcome menu (first two items swapped) is kind of a
sluggish, because it requires a full (recrusive) shallow copy of the welcome
menu. Cache the result of that and re-use it later, instead of building it
everytime.
While here, don't create temporary locals just for swapping. The following
is just as good:
x, y = y, x;
Reported by: Alexander Nasonov <alnsn@yandex.ru> (swapping)
A subtle logic bug, probably introduced in r311895, caused tail to print the
first two lines of piped input in forward order, if the very first character
was a newline.
PR: 222671
Reported by: Jim Long <freebsd-bugzilla@umpquanet.com>, pprocacci@gmail.com
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
VirtIO V1 provides configuration in multiple VENDOR capabilities so this
allows all of the configuration to be discovered.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14325
[Enter] should be moved to the single user menu item when we swap them.
Define a non-standard menu entry function "alternate_name" to use for this
purpose for ultimate flexibility if we change our minds later. When we're
booting single user, make a shallow copy of the menu that we'd normally
display and swap the items and their name functions to use alternate_name
instead. Toggling single user in the options menu and going back to the main
menu will now correctly reflect the current boot setting with the first two
menu options and "[Enter]" will always be on the right one.
This shallow copy technique has the chance of being quite slow since it's
done on every redraw, but in my testing it does not seem to make any obvious
difference.
shallowCopyTable could likely belong better in a general-purpose utility
module, but this (and the key constnats) are the only candidates we have at
the moment so we'll drop it into our core stuff for the moment and consider
re-organization at a later date.
lualoader does a pretty good job of reverting any environment changes now.
It will even wipe out boot_verbose if it's set explicitly in loader.conf(5)
and overwritten in the boot options menu.
Future work will likely change this, as explicit choices made in the menu
should probably override the new loader.conf(5). I don't suspect this will
cause much grief, though, so it is not a high priority until boot
environment support actually lands.
This will be used when boot environment support lands to make a good-faith
effort to apply any new loader.conf(5) environment settings atop the default
configuration that we started with.
If we've fetched menu.entries and it turns out it's a function, call it to
get the actual menu entries.
This will be used to swap multi-/single- user boot options if we're booting
single user by default (boot_single="YES" in loader.conf(5)). It can also be
used fairly easily for other non-standard situations.