platform specific drivers a chance to override the generic driver.
Reviewed by: mmel, adrian (mentor)
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5701
The first of set of patches.
Use wider load/stores when aligned buffer is being copied.
In a simple test:
dd if=/dev/zero of=/dev/null bs=1M count=1024
the performance jumped from 410MB/s up to 3.6GB/s.
TODO:
- better handling of unaligned buffers (WiP)
- implement similar mechanism to bzero
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D5664
expects that the loop is always exited with the SU lock owned, even on
error.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Skip the log entry as there is nothing good to write out. Don't fail
the syscall though since it already succeeded. There's no reason
filemon's tracing failure should fail the already-succeeded syscall.
Record the error for later to return from close(2) on the filemon devfs
file descriptor.
Discussed with: markj, sjg, kib (briefly with kib)
Reported by: mjg
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
If the tracer has decided to the close the log then it should be fully
written, not getting more entries, when close(2) returns. This was
a regression in r297156 in that it allowed a traced process to continue
a traced syscall and add more entries to the log while the tracer had
already closed its fd or exited. This was only really part of the
daemonized process case which is abnormal.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Furthermore, there is no reason this needs to be a 64-bit integer
for the forseeable future.
Also, there is an inconsistency between to_flags and the mask in
tcp_addoptions(). Before r195654, to_flags was a u_long and the mask in
tcp_addoptions() was a u_int. r195654 changed to_flags to be a u_int64_t
but left the mask in tcp_addoptions() as a u_int, meaning that these
variables will only be the same width on platforms with 64-bit integers.
Convert both to_flags and the mask in tcp_addoptions() to be explicitly
32-bit variables. This may save a few cycles on 32-bit platforms, and
avoids unnecessarily mixing types.
Differential Revision: https://reviews.freebsd.org/D5584
Reviewed by: hiren
MFC after: 2 weeks
Sponsored by: Juniper Networks
Factor out nd6 and in6_attach initialization to their own files.
Also move destruction into those files though still called from
the central initialization.
Sponsored by: CK Software GmbH
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D5033
This restores the pre-r290196 behaviour, eliminating the need to manually
press '.' a couple of times to get USB to finish probing.
Note that there's still something wrong with the console (character
echoing doesn't quite work), and there's also a reported problem with
BHyVe, but those two don't seem related to the problem above.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
The mbuf provider is made up of a set of Statically Defined Tracepoints
which help us look into mbufs as they are allocated and freed. This can be
used to inspect the buffers or for a simplified mbuf leak detector.
New tracepoints are:
mbuf:::m-init
mbuf:::m-gethdr
mbuf:::m-get
mbuf:::m-getcl
mbuf:::m-clget
mbuf:::m-cljget
mbuf:::m-cljset
mbuf:::m-free
mbuf:::m-freem
There is also a translator for mbufs which gives some visibility into the structure,
see mbuf.d for more details.
Reviewed by: bz, markj
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D5682
Make it a device option to be included in the kernel configs that request this file.
Reported by: mmel
Suggested by: mmel
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D5699
from userpsace. Previously we could have triggered a panic by trying to
jump to a kernel address from userland as the trap handling code thought we
received an ast in kernel mode.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This mainly used to improve ACK timeliness when multiple RX rings
are enabled.
This value gives the best performance in both Azure and Hyper-V
environment, w/ both 10Ge and 40Ge using non-{INVARIANTS,WITNESS}
kernel.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5691
Set watchdog timer parameters only when they really need to be changed.
In other cases just restart the timer with single Reset command instead
of two (Set and Reset).
From one side this visually reduces amount of CPU time burned in tight
loop waiting while some slow BMC configures its watchdog hardware, that
seems to be much more complicated task then just resetting the timer.
From another side on some BMCs those slow Set commands sometimes tend to
timeout, that leads to noisy log messages and even more CPU time burned,
so avoiding them can provide even bigger bonuses.
MFC after: 2 weeks
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5215
This gets rid of the per-cpu SWIs.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5215
Using the same message slot as the other types of the messages has
the side effect that the event timer message could be deferred to
the swi threads to run (lacking of trapframe and the original code
didn't even handle that, so the event timer was actually broken).
As of this commit we use an independent message slot for event timer,
so that we could handle all of event timer messages in the interrupt
handler directly. Note, the message slot for event timer is still
bind to the same interrupt vector as the other types of messages.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe
Discussed with: Jun Su <junsu microsoft com>, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5696
This is a pretty good reference for teaching an almost-11n-capable
driver about 11n.
It enables HT20 operation, A-MPDU/A-MSDU RX, but no aggregate support
for transmit. That'll come later. This means that receive throughput
should be higher, but transmit throughput won't have changed much.
* Disable bgscan - for now, bgscan will interfere with AMPDU TX/RX,
so until we correctly handle it in software driven scans, disable.
* Add null 11n methods for channel width / ampdu_enable.
the firmware can apparently handle ampdu tx (and hopefully block-ack
handling and retransmission) so I'll go review the linux code and
figure it out.
* Set the number of tx/rx streams. I /hope/ that nchains == nstreams
here.
* Add 11n channels in the call to ieee80211_init_channels().
* Don't enable HT40 for now - I'll have to verify the channel set command
and tidy it up a bit first.
* Teach the RX path about M_AMPDU for 11n nodes. Kinda wonder why
we aren't just doing this in net80211 already, this is the fourth
driver I've had to do this to.
* Teach rate2ridx() about MCS rates and what hardware rates to use.
* Teach the urtwn_tx_data() routine about MCS/11ng transmission.
It doesn't know about short-gi and 40MHz modes yet; that'll come
later.
* For 8192CU firmware, teach the rate table code about MCS rates.
* Ensure that the fixed rate transmit sets the right transmit flag
so the firmware obeys the driver transmit path.
* Set the default transmit rate to MCS4 if no rate control is available.
* Add HT protection (RTS-CTS exchange) support.
* Add appropriate XXX TODO entries.
TODO:
* 40MHz, short-gi, etc - channel tuning, TX, RX;
* teach urtwn_tx_raw() about (more) 11n stuff;
* A-MPDU TX would be nice!
Thanks to Andriy (avos@) for reviewing the code and testing it on IRC.
Tested:
* RTL8188EU - STA (me)
* RTL8192CU - STA (me)
* RTL8188EU - hostap (avos)
* RTL8192CU - STA (avos)
Reviewed by: avos
- Replace sc_reinittask() by ieee80211_restart_all() (mostly the same).
- Revert r282377 (seems to be unneeded now).
Tested with Intel 3945BG, STA mode.
Differential Revision: https://reviews.freebsd.org/D5056
First, update the return types of aio_return() and aio_waitcomplete() to
ssize_t.
POSIX requires aio_return() to return a ssize_t so that it can represent
all return values from read() and write(). aio_waitcomplete() should use
ssize_t for the same reason.
aio_return() has used ssize_t in <aio.h> since r31620 but the manpage and
system call entry were not updated. aio_waitcomplete() has always
returned int.
Note that this does not require new system call stubs as this is
effectively only an API change in how the compiler interprets the return
value.
Second, allow aio_nbytes values up to IOSIZE_MAX instead of just INT_MAX.
aio_read/write should now honor the same length limits as normal read/write.
Third, use longs instead of ints in the aio_return() and aio_waitcomplete()
system call functions so that the 64-bit size_t in the in-kernel aiocb
isn't truncated to 32-bits before being copied out to userland or
being returned.
Finally, a simple test has been added to verify the bounds checking on the
maximum read size from a file.
None of lstat(2), fstat(2), fstatat(2) were tracked either.
The other filemon implementations also do not track stat(2), nor
does bmake utilize it. The act of opening a file for read should
be enough to decide that a file is a dependency. There could be
rare cases where just having a file would cause a dependency but it
is unlikely.
MFC after: 2 weeks
Also noted by: sjg
Sponsored by: EMC / Isilon Storage Division
- proc.p_filemon is added which is protected by PROC_LOCK. This improves
performance and avoids double-fork issues, taking allproc_lock
while in syscalls, and walking the process tree in syscalls. A
particular proc.p_filemon can only be changed to NULL or another
filemon, or the filemon inherited, while the filemon->lock is held.
- Filemon are reference counted. On the last reference the log will be closed.
- When closing the devfs file handle, the filemon will be detached from all
processes and inheritance prevented.
- Disallow attaching to a process already being traced since filemon is
typically intended to be used on children only. This is allowed for
curproc as bmake relies on this behavior for rare cases when combining
.MAKE with .META.
- Detach any previously tracked process on ioctl(FILEMON_SET_PID).
- Handle error from devfs_set_cdevpriv() in filemon_open().
- The global filemon lock and lists are removed.
- A free list is no longer kept. Previously this list was
forever-expanding and never garbage cleaned.
- No longer loses track of double-forks. If the process holding the filemon
handle closes it will close the log rather than wait on a daemonized process,
but it will log all activity until it closes its handle. The filemon
will be removed from the process and not inherited.
- A separate process count is kept only as an optimization for
forced detachment to avoid taking allproc_lock and walking the entire
process tree.
- struct filemon access is protected by sx(9) filemon->lock as it was before.
- Add more comments and KASSERTS.
MFC after: 2 weeks
Reviewed by: kib, mjg, markj (all on previous versions)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5520
to the boot.netif.mtu env var, which will be picked up by pre-existing code
in nfs_mountroot() and used to configure the interface accordingly.
This should bring the same functionality when the bootp/dhcp work is done
by loader(8) as r297150 does for the in-kernel BOOTP case.
set that mtu on the interface.
These changes are based on the patch submitted by Robert Blayzor in the
PR, but I changed things around a bit, so the blame for any mistakes
belongs to me.
PR: 187094
Submitted by: Ju Sun <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5651
This write came from Linux commit b4ae3f22d238 which has been implicated
in Sandy Bridge power consumption issues (albeit under different
conditions on Linux). Disabling it restores normal power consumption on
my Sandy Bridge laptop (Thinkpad X220).
PR: 207889
Reviewed by: cem, dumbbell
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5665
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc. This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).
(Thanks to jilles@ for providing the vital clue about the kernel linker.)
ahci.c had one signed long, which was passed into rman, rather than u_long.
After the switch of rman_res_t from size u_long to size uintmax_t, the sign
extension caused ranges to get messed up, and ahcich* to not attach.
There may be more signed longs used in this way, which will be fixed as they're
reported.
Reported by: pho
1. Limit secs to INT32_MAX / 2 to avoid errors from kern_setitimer().
Assert that kern_setitimer() returns 0.
Remove bogus cast of secs.
Fix style(9) issues.
2. Increment the return value if the remaining tv_usec value more than 500000 as a Linux does.
Pointed out by: [1] Bruce Evans
MFC after: 1 week
There's some upcoming work to add new chipset support here and I'd
like to only add 802.11n support to one driver, instead of both
urtwn and rtwn.
There's also missing support for things like 802.11n, some powersave
work, bluetooth integration/coexistence, etc, and also newer parts
(like 8192EU, maybe some 11ac parts, not sure yet.)
So, this is hopefully the first step in a longer set of steps to unify
rtwn/urtwn and extend it with more interesting chipset and functionality
support.
Reviewed by: kevlo
An IPI cannot be sent via the local APIC if a previous IPI is still
being delivered. Attempts to send an IPI will wait for a pending IPI
to clear. Prior to r278325 these checks used a spin loop with a
hardcoded maximum count which broke AP startup on some systems.
However, r278325 also enforced a minimum latency of 5 microseconds if an
IPI was still pending which resulted in a measurable performance hit.
This change reduces that minimum latency to 1 microsecond.
Tested by: stas
MFC after: 3 days
For the !unmap case it may happen that pbuf gets called unreferenced
when vm_fault_quick_hold_pages() fails.
Initialize it so it doesn't cause trouble.
CID: 1352776
Reviewed by: jhb
MFC after: 1 week
This is a subset of what's in the linux 802.11ac implementation.
I've verified that the bits that mention an 802.11ac draft are
still the same in 802.11ac-2013 and noted it accordingly.
This is for the most part one big no-op.
Obtained from: 802.11ac-2013.pdf
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
This allows some simplification of its callers. No functional change
intended.
Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month
pointer isn't NULL, it is safe, because we are handling IPV6_PKTINFO
socket option in this block of code. Also, use in6ifa_withaddr() instead
of ifa_withaddr().
We changed the ABI for ARM in 10, an removed support for the old ABI in 11,
as such binaries from these releases are unable to be run on a head kernel.
Reviewed by: bz, emast
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5652
