optimize away these loops. Change boolean to int to match what atomic
API supplies. Remove wmb() since the atomic_store_rel() on status.done
ensure the prior writes to status. It also fixes the fact that there
wasn't a rmb() before reading done. This should also be more efficient
since wmb() is fairly heavy weight.
Sponsored by: Netflix
Reviewed by: kib@, jim harris
Differential Revision: https://reviews.freebsd.org/D14053
I suppose it should make this code NUMA-aware with recent NUMA drop-in,
trying to allocate shared memory buffers from domain closer to NT-bridge.
MFC after: 2 weeks
Build with rtl8366rb has been broken due to incorrect retrieval of pointer
to device_t.
Reported by: lwhsu
Differential Revision: https://reviews.freebsd.org/D14044
This patch is cosmetic. It checks if allocation of ifnet structure failed.
It's better to have this check rather than assume positive scenario.
Submitted by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Properly honor the lack of the CRD_F_IV_PRESENT flag in the GCM
software fallback case for encryption requests.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
In particular, this avoids edge cases where a generated IV might be
written into the output buffer even though the request is failed with
an error.
Sponsored by: Chelsio Communications
- Extend ccr_gcm_soft() to handle requests with a non-empty payload.
While here, switch to allocating the GMAC context instead of placing
it on the stack since it is over 1KB in size.
- Allow ccr_gcm() to return a special error value (EMSGSIZE) which
triggers a fallback to ccr_gcm_soft(). Move the existing empty
payload check into ccr_gcm() and change a few other cases
(e.g. large AAD) to fallback to software via EMSGSIZE as well.
- Add a new 'sw_fallback' stat to count the number of requests
processed via the software fallback.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
This works around an issue in the T6 that can result in DMA engine
stalls if an error occurs while processing a DSGL entry with a length
larger than 2KB.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Most crypto requests will not trigger this condition, but a request
with a highly-fragmented data buffer (and a resulting "large" S/G
list) could trigger it.
Sponsored by: Chelsio Communications
The T6 can hang when processing certain AEAD requests if the request
sets a flag asking the crypto engine to discard the input IV and AAD
rather than copying them into the output buffer. The existing driver
always discards the IV and AAD as we do not need it. As a workaround,
allocate a single "dummy" buffer when the ccr driver attaches and
change all AEAD requests to write the IV and AAD to this scratch
buffer. The contents of the scratch buffer are never used (similar to
"bogus_page"), and it is ok for multiple in-flight requests to share
this dummy buffer.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
The T6 crypto engine's control messages only support a total AAD
length (including the prefixed IV) of 511 bytes. Reject requests with
large AAD rather than returning incorrect results.
Sponsored by: Chelsio Communications
Combined authentication-encryption and GCM requests already stored the
IV in the immediate explicitly. This extends this behavior to block
cipher requests to work around a firmware bug. While here, simplify
the AEAD and GCM handlers to not include always-true conditions.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The recursive ownership support added in r321584 was unconditionally in
effect all the time -- whenever a given i2c slave device instance tried to
lock the i2c bus for exclusive use when it already owned the bus, the call
returned immediately without waiting. However, many i2c slave drivers use
bus ownership to enforce that only a single thread at a time can be using
the slave device. The recursive locking changes broke this use case.
Now there is a new flag, IIC_RECURSIVE, which can be mixed in with the
other flags passed to iicbus_acquire_bus() to allow drivers to indicate
when recursive locking is desired. Using the flag implies that the driver
is managing concurrent access to the device by different threads in some way.
This immediately fixes all existing i2c slave drivers except for the two
i2c RTC drivers which use the recursive locking feature; those will be
fixed in a followup commit.
In iflib, the device-specific init() function isn't supposed to edit
the struct ifnet driver flags. If it does, it'll cause an MPASS() assert
in iflib to fail.
PR: 225312
Reported by: bhughes@
These functions deal the same type of overflows we do with mallocarray(9).
Using our mallocarray will panic, which different from the previous
behavior (returning NULL), but neither behavior is more correct.
As a sidenote, drm_calloc_large() is not currently used at all.
Reviewed by: dumbbell
Differential Revision: https://reviews.freebsd.org/D13835
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Similarly as other extres pseudo-drivers, implement phy by using kobj model.
This detaches it from provider device, so single device driver can export
multiple different phys. Additionally, this allows phy to be subclassed to
more specialized drivers, like is USB OTG phy, or PCIe phy with hot-plug
capability.
Tested by: manu (previous version, on Allwinner board)
MFC after: 1 month
During set_freq a clknode might have reparent (using a better parent that
have a higher frequency for example), before refreshing the cache, re-get
the parent frequency.
Reviewed by: mmel
possible to change string and numeric vendor and product identifiers,
as well as anything else there might be to change for a particular
device side template, eg the MAC address.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13920
This fixes a panic when `EVDEV_SUPPORT` is enabled: if a trackpoint
packet was detected but there was no trackpoint, we still tried to emit an
evdev event even though the associated relative evdev device (`evdev_r`)
was not initialized.
PR: 225339
MFC after: 1 week
In psmprobe(), we set the initial `syncmask` to the vendor default value
if the `PSM_CONFIG_NOCHECKSYNC` bit is unset. However, we currently only
set it for the Elantech touchpad later in psmattach(), thus `syncmask`
is always configured.
Now, we check `PSM_CONFIG_NOCHECKSYNC` and skip sync check if it is set.
This fixes Elantech touchpad support for units which have `hascrc` set.
To clarify that, when we log the `syncmask` and `syncbits` fields, also
mention if they are actually used.
Finally, when we set `PSM_CONFIG_NOCHECKSYNC`, clear `PSM_NEED_SYNCBITS`
flag.
PR: 225338
MFC after: 1 week
any children prior to detach.
With the newbus child deletion ordering changes introduced in r307518,
parent devices are now detached (and their driver set to NULL) prior to
detaching and deleting child devices; child-related bus methods (e.g.
BUS_CHILD_DETACHED, BUS_CHILD_DELETED) are no longer be dispatched to the
parent device driver after it returns 0 (success) from DEVICE_DETACH.
Sponsored by: The FreeBSD Foundation
addressing. The host addressing constraint does not apply to device address
space, and shouldn't be passed to bhnd_get_dma_translation() as the
maximum supported device address width.
Sponsored by: The FreeBSD Foundation
- Extend the probe method to accept devclasses that inherit from the pci
devclass (e.g. cardbus).
- Some BCM4306-based CardBus adapters appear to advertise 4K SPROM, but
only the first 2K is mapped into BAR0. We can safely assume that the
SPROM data fits within the first 2K of the SPROM, rather than rejecting
the SPROM mapping as invalid.
Sponsored by: The FreeBSD Foundation
- Do not panic on siba(4) detach when the bhnd(4) bus calls
bhnd_get_pmu_info() on a PMU-less device.
- Fix bhnd_pwrctl attach/detach on fixed-clock devices:
- Treat bhnd_pwrctl_updateclk() as a no-op on fixed-clock devices.
- Use bhnd_pwrctl_updateclk() to perform the appropriate clock
transition on detach.
Sponsored by: The FreeBSD Foundation
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
r326454.
bwn(4)/bhnd(4) has been tested with most chipsets currently supported by
bwn(4), and this change should be transparent to existing bwn(4) users;
please report any regressions that you do encounter.
To revert to using siba_bwn(4) instead of bhnd(4), place the following
lines in loader.conf(5):
hw.bwn_pci.preferred="0"
Once we're satisfied that the switch to bhnd(4) has seen sufficient broader
testing, bwn(4) will be migrated to use the native bhnd(9) interface
directly, and support for siba_bwn(4) will be dropped (see D13518).
Sponsored by: The FreeBSD Foundation
pmcstat request for close will generate a close event.
This event will be in turn received by pmcstat to close the file.
Reviewed by: kib
Tested by: pho
MFC after: 1 week
Sponsored by: Stormshield
The implementation of the Kernel Page Table Isolation (KPTI) for
amd64, first version. It provides a workaround for the 'meltdown'
vulnerability. PTI is turned off by default for now, enable with the
loader tunable vm.pmap.pti=1.
The pmap page table is split into kernel-mode table and user-mode
table. Kernel-mode table is identical to the non-PTI table, while
usermode table is obtained from kernel table by leaving userspace
mappings intact, but only leaving the following parts of the kernel
mapped:
kernel text (but not modules text)
PCPU
GDT/IDT/user LDT/task structures
IST stacks for NMI and doublefault handlers.
Kernel switches to user page table before returning to usermode, and
restores full kernel page table on the entry. Initial kernel-mode
stack for PTI trampoline is allocated in PCPU, it is only 16
qwords. Kernel entry trampoline switches page tables. then the
hardware trap frame is copied to the normal kstack, and execution
continues.
IST stacks are kept mapped and no trampoline is needed for
NMI/doublefault, but of course page table switch is performed.
On return to usermode, the trampoline is used again, iret frame is
copied to the trampoline stack, page tables are switched and iretq is
executed. The case of iretq faulting due to the invalid usermode
context is tricky, since the frame for fault is appended to the
trampoline frame. Besides copying the fault frame and original
(corrupted) frame to kstack, the fault frame must be patched to make
it look as if the fault occured on the kstack, see the comment in
doret_iret detection code in trap().
Currently kernel pages which are mapped during trampoline operation
are identical for all pmaps. They are registered using
pmap_pti_add_kva(). Besides initial registrations done during boot,
LDT and non-common TSS segments are registered if user requested their
use. In principle, they can be installed into kernel page table per
pmap with some work. Similarly, PCPU can be hidden from userspace
mapping using trampoline PCPU page, but again I do not see much
benefits besides complexity.
PDPE pages for the kernel half of the user page tables are
pre-allocated during boot because we need to know pml4 entries which
are copied to the top-level paging structure page, in advance on a new
pmap creation. I enforce this to avoid iterating over the all
existing pmaps if a new PDPE page is needed for PTI kernel mappings.
The iteration is a known problematic operation on i386.
The need to flush hidden kernel translations on the switch to user
mode make global tables (PG_G) meaningless and even harming, so PG_G
use is disabled for PTI case. Our existing use of PCID is
incompatible with PTI and is automatically disabled if PTI is
enabled. PCID can be forced on only for developer's benefit.
MCE is known to be broken, it requires IST stack to operate completely
correctly even for non-PTI case, and absolutely needs dedicated IST
stack because MCE delivery while trampoline did not switched from PTI
stack is fatal. The fix is pending.
Reviewed by: markj (partially)
Tested by: pho (previous version)
Discussed with: jeff, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On a SPROM-less device, the PCI(e) bridge core will be initialized with its
power-on-reset defaults; this can leave the SPROM-derived BHND_PCI_SRSH_PI
value pointing to the wrong backplane address. This value is used by the
PCI core when performing address translation between the static register
windows in BAR0 that map the PCI core's register block, and backplane
address space.
Previously, bhndb_pci(4) incorrectly used the potentially invalid static
BAR0 PCI register windows when attempting to correct the BHND_PCI_SRSH_PI
value in the PCI core's SPROM shadow.
Instead, we now read/update BHND_PCI_SRSH_PI by fetching the PCI core's
backplane address from the core enumeration table, and then using a dynamic
register window to explicitly map the PCI core's register block into BAR0.
Sponsored by: The FreeBSD Foundation
The implementation will follow (D12723). For now, get the changes to
commit-protected files out of the way.
Approved by: secteam (gordon)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13925
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Since we have no control over the name, the MAKEDEV_CHECKNAME flag must be
used to return an error on an invalid (to devfs) name instead of panicing.
r305900 that originally added this feature also introduced a few other bugs:
- Proper locking not performed
- Theoretically broke the expectation that the control event buffer would
not span more than one pages, but did not update the CTASSERT that was
in place to prevent this. However, since the struct virtio_console_control
and the bulk buffer together were quite small, this could not have happened.
Also workaround an QEMU VirtIO spec violation in that it includes the NUL
terminator in the buffer length when the spec says it is not included.
PR: 223531
MFC after: 1 week
Attaching syscon_generic earlier than BUS_PASS_DEFAULT makes it more
difficult for specific syscon drivers to attach to the syscon node and to
get ordering right. Further discussion yielded the following set of
decisions:
- Move syscon_generic to BUS_PASS_DEFAULT
- If a platform needs a syscon with different attach order or probe
behavior, it should subclass syscon_generic and match on the SoC specific
compat string
- When we come across a need for a syscon that attaches earlier but only
specifies compatible = "syscon", we should create a syscon_exclusive driver
that provides generic access but probes earlier and only matches if "syscon"
is the only compatible. Such fdt nodes do exist in the wild right now, but
we don't really use them at the moment.
Additionally:
- Any syscon provider that has needs any more complex than a spinlock solely
for syscon access and a single memory resource should subclass syscon
directly rather than attempting to subclass syscon_generic or add complexity
to it. syscon_generic's attach/detach methods may be made public should the
need arise to subclass it with additional attach/detach behavior.
We introduce aw_syscon(4) that just subclasses syscon_generic but probes
earlier to meet our requirements for if_awg and implements #2 above for this
specific situation. It currently only matches a64/a83t/h3 since these are
the only platforms that really need it at the time being.
Discussed with: ian
Reviewed by: manu, andrew, bcr (manpages, content unchanged since review)
Differential Revision: https://reviews.freebsd.org/D13793
that userland doesn't switch partitions on its own, compare against
the partition mmcsd_ioctl_cmd() is going to switch to (based on the
device node used) rather than the currently selected partition.
executed, the interrupt aggregation code might have disabled the
SDHCI_INT_DMA_END and/or SDHCI_INT_RESPONSE bits in slot->intmask
and the SDHCI_SIGNAL_ENABLE register respectively. So when restoring
the interrupt masks based on the previous contents of slot->intmask
in sdhci_exec_tuning(), ensure that the SDHCI_INT_ENABLE register
doesn't lose these two bits.
While at it and in the spirit of r327339, let sdhci_tuning_intmask()
set the tuning error and re-tuning interrupt bits based on the
SDHCI_TUNING_ENABLED rather than the SDHCI_TUNING_SUPPORTED flag
being set, i. e. only when (re-)tuning is actually used. Currently,
this changes makes no net difference, though.
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
The value written to E1000_TARC(0) wasn't intended to have every bit but
E1000_TARC0_CB_MULTIQ_3_REQ cleared; a ~ was missing.
Also change the referenced spec update section in the comment to the correct
section.
Sponsored by: Intel Corporation
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
Unconditional 32-bit shift is not endianness-safe.
Modify the logic to work both on LE and BE.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13102
The driver now fully observes watchdog(9) protocol.
Previously a too large timeout was silently clamped while the correct
behavior is to disable the watchdog and leave the error as is
(i.e. to not report success).
Also, previously a too small value caused the timer to stop while the
correct behavior is to use the minimal supported value.
MFC after: 2 weeks
RTC chips that have a control register bit for am/pm mode, the DS13xx series
uses one of the high bits in the hour register. Thus, when setting the time
in am/pm mode, the am/pm mode flag has to be ORed into the hour.
If the MD_VERIFY flag is set, we should use O_VERIFY. If the MD_VERIFY flag
is not set, we should not.
Reviewed by: stevek
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13814
ian@ pointed out that BUS_PASS_DEFAULT + $anything is bogus, given that
BUS_PASS_DEFAULT is defined as __INT_MAX. Instead, we take a page out of
imx6_usbphy's book and use BUS_PASS_DEFAULT - 1000 to achieve the desired
effect of syscon_generic attaching before if_awg and other potential
consumers, but late enough that more specialized implementations should have
no problem attaching instead.
Reported by: ian
It still needs to be before if_awg at least in order to be available for
other operations, but it should not be attaching before interrupt
controllers at the very least.
This should make errors involving syscon register space colliding with other
devices a little more innocent, but these conflicts should really be tracked
down and resolved. One such conflict is with the Raspberry Pi 3 local
interrupt controller, noticed by tuexen@
Reported by: tuexen
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
Apply the fix from r327499 to additional ioctl handlers.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
MFC after: 1 week
MFC with: r327499
Sponsored by: The FreeBSD Foundation
The ath_btcoex_ioctl handler allocated a buffer without M_ZERO and
returned it to userland without writing to it.
The device has permissions only for root so this is not urgent, and the
fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: adrian
MFC after: 1 week
The hpt{nr,rr} ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27{nr,rr} device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
The same issue was reported in the hpt27xx driver by Ilja Van Sprundel.
Reviewed by: jhb, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The hpt27xx ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27xx device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com> (M_ZERO)
Reviewed by: jhb, kib
MFC after: 3 days
Security: info leak in root-only ioctl
Sponsored by: The FreeBSD Foundation
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
During review iterations function signature has changed in definition
but not in actual call. Fix call to match the definition.
Reported by: Herbert J. Skuhra
Pointyhat to: gonzo
MFC after: 2 weeks
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
Fully subclass the dwmmc driver and split every driver into multiple files.
There is still a few quirks in the dwmmc driver that will need some work.
Tested On: Pine64 Rock64
Differential Revision: https://reviews.freebsd.org/D13615
The ep(4) driver is the only consumer of the two functions from
elink.c. I removed the standalone module as well, and most likely,
the module metadata is not needed anywhere, but this is for later
cleanup.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation
to recover from that, especially when something goes wrong.
- When userland changes EXT_CSD, update the kernel copy before using
relevant EXT_CSD bits in mmcsd_switch_part().
enabled (though, no interrupt generation enabled for them) all the
time as soon as (re-)tuning is supported; only enable them and let
them generate interrupts when actually using (re-)tuning.
- Also disable all interrupts except SDHCI_INT_DATA_AVAIL ones while
executing tuning and not just their signaling.
Resolve a minor mismatch: TXP_CMD_READ_VERSION instead of
TXP_CMD_VERSIONS_READ.
Curiously the later is defined but not used in OpenBSD.
Obtained from: OpenBSD (CVS 1.31-1.34)
MFC after: 1 week
r327106 introduced kobj to syscon so it can be subclassed and fit in with
the rest of the syscon framework. The diff for syscon.c was misapplied in a
clean tree prior to commit, so bring it back to what was included in the
review and tested. The entire file has basically been rewritten from what
was present prior to the kobj work.
Pointy hat to: me
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
This should help reduce confusion between syscon/syscons a little bit.
syscon is a resource generally modeled by FDT platforms, and not to be
confused with syscons.
Allow more flexibility by kobj'ifying syscon and splitting out fdt specific
bits in preparation of a move to the extres framework.
The generic fdt driver has been moved to syscon_generic.c and the fdt
requirement has been removed from the syscon interface, as is common to the
extres framework.
Reviewed by: strejda
Differential Revision: https://reviews.freebsd.org/D13521
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
about CIS3/CIS4, including studies I've done on my large collection of
PC Cards bought off e-bay over the years since the original entry as
well as conversations I've had at conferences.
leaves the firmware event queue (fwq) as the only queue that can take
interrupts for others.
This simplifies cfg_itype_and_nqueues and queue allocation in the driver
at the cost of a little (never?) used configuration. It also allows
service_iq to be split into two specialized variants in the future.
MFC after: 2 months
Sponsored by: Chelsio Communications
While the BSD-2-Clause license is there, the GPLv2 is also present.
I am unsure of the implications of having both licenses as they are here.
I'll just leave it untagged and open for interpretation.
This allows one to specify, for example, that if there's an igb card
in bus 12, slot 0, function 0, it should be assigned igb5. If there
isn't, or there's one in a different slot, normal numbering rules
apply (hinted units are skipped). Adding 'hint.igb.5.at="pci12:0:0"'
or 'hint.igb.5.at="pci0:12:0:0"' to /boot/device.hints will accomplish
this. The double quotes are important.
The kernel only accepts the strings (in shell notation):
pci$d:$b:$s:$f
and pci$b:$s:$f
where $d is the pci domain, $b is the pci bus number, $s is the slot
number and $f is the function number. A string compare is done with
the current device to avoid another string parser in the kernel. All
numbers are unsigned decimal without leading zeros.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13546
MD_READONLY flag for the md device automatically instantiated during
kernel init for an mdroot filesystem.
Note that there is specifically and by design no tunable or sysctl
control over this feature. Without this option, you already have control
over whether the mdroot fs is writeable using vfs.root.mountfrom.options
from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /"
or equivelent on the fly. This option is being added to provide a way
to make the mdroot fs truly immutable before userland code begins running.
Differential Revision: https://reviews.freebsd.org/D13411
Initial update to the ixgbe PF and VF drivers to support the iflib interface.
The PF driver version is bumped to 4.0.0, and the VF driver version is bumped to 2.0.0.
Special thanks to sbruno@ for the support in helping make this conversion happen.
Submitted by: Jeb Cramer <cramerj@intel.com>, Krzysztof Galazka (Chris) <krzysztof.galazka@intel.com>, Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: sbruno@, shurd@, #IntelNetworking
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>, Sergey Kozlov <kozlov.sergey.404@gmail.com>
Sponsored by: Limelight Networks, Intel Corporation
Differential Revision: https://reviews.freebsd.org/D11727
Previously, it silently only supported auto, instead, log a message
indicating why only auto is supported.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13358
It's possible to change the SFP module when link is down, which would
change the available media types. This is part of D13358.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
New Stratus bnxt devices require support for short HWRM commands for VFs
to function. Enable their use, but only use them if it's both supported
and required... prefer the long HWRM commands when possible.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13269?id=36180
The firmware is always in little endian, use htole*() for all request fields
larger than one byte.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
The IA32 memory model guarantees that all writes are seen in the program
order. Also, any access to the uncacheable memory flushes the store
buffers. As the consequence, SFENCE instruction is (almost) never needed,
in particular, it is not needed to ensure the correct order of updates as
seen by a PCIe device.
Use atomic_thread_fence_rel() instead of wb() to only emit compiler barriers
on x86 there. Other architectures get the right barrier instruction as
well.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies
MFC after: 1 week
By the ACPI standard (ACPI 5 chapter 8.4 Declaring Processors) Processors
can be implemented in 2 distinct ways:
* Through a Processor object type (which provides P_BLK)
* Through a Device object type
Prior to this change, the FreeBSD driver only supported the former. AMD
Epyc / Poweredge systems we are testing both implement the latter only. Add
the missing support.
Because P_BLK is not defined in the device object case, C-states entering
must be completely controlled via _CST methods rather than P_LVL2/3.
John Baldwin points out that ACPI 6.0 formally deprecates the Processor
keyword, so eventually processors will only be enumerated as Device objects.
Submitted by: attilio
Reviewed by: jhb, markj, Anton Rang <rang AT acm.org>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13457
bug that requires 'hands off' for a period of time (2.3s) before we
check the RDY bit. Sicne this is a very odd quirk for a very limited
selection of drives, do this as a quirk. This prevented a successful
reset of the card when the card wedged.
Also, make sure that we comply with the advice from section 3.1.5 of
the 1.3 spec says that transitioning CC.EN from 0 to 1 when CSTS.RDY
is 1 or transitioning CC.EN from 1 to 0 when CSTS.RDY is 0 "has
undefined results". Short circuit when EN == RDY == desired state.
Finally, fail the reset if the disable fails. This will lead to a
failed device, which is what we want. (note: nda device needs
work for coping with a failed device).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13389
- Fix reference of uninitialized error value in bhndb_generic_resume() if
the dynamic window count is 0.
- Fix incorrect bhnd_pmu(4) UPTME_MASK and PLL0_PC2_WILD_INT_MASK
constants.
- Variable definitions referenced by our generated SPROM layouts will never
be NULL, but add explicit asserts to make that clear.
- Add missing variable initialization in bhnd_nvram_sprom_ident().
- Fix leak of driver array in bhnd_erom_probe_driver_classes().
- Fix zero-length memset() in bhndb_pci_eio_init().
- Fix an off-by-one error and potential invalid OOBSEL bit shift operation
in bcma_dinfo_init_intrs().
- Remove dead code in siba_suspend_hw().
- Fix duplicate call to bhnd_pmu_enable_regulator() in both the enable and
disable code paths of bhnd_compat_cc_pmu_set_ldoparef().
Reported by: Coverity
CIDs: 1355194, 1362020, 1362022, 1373114, 1366563, 1373115,
1381569, 1381579, 1383555, 1383566, 1383571
Sponsored by: The FreeBSD Foundation
- Add the BCM4322X D11 core revision and missing BCM43224 PCI device ID to
our device tables.
- Disable the DMA engine parity check (rather than adding parity support
to the to-be-replaced bwn(4) DMA implementation).
Currently, N-PHY support in bwn(4) is GPL licensed, and is not included by
default. Until this is replaced with Broadcom's ISC-licensed N-PHY
implementation, bwn(4) must be rebuilt to enable N-PHY support.
To build bwn(4) with N-PHY support, add the following lines to your kernel
configuration file and rebuild the kernel (and modules):
options BWN_GPL_PHY
To test bwn(4) with a BCM43224/BCM43225 device, install the firmware from
the net/bwn-firmware-kmod port, and place the following lines in
loader.conf(5):
hw.bwn_pci.preferred="1"
if_bwn_pci_load="YES
bwn_v4_ucode_load="YES"
bwn_v4_n_ucode_load="YES"
bwn_v4_lp_ucode_load="YES"
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Official Linux dts's put the individual portals under a simple-bus, rather
than under a '*-portals' grouping. This adds a hack to permit that, which
gets us closer to using stock device trees for DPAA-based devices.
- The window target must always be updated when stealing a register window.
- Fix missing initialization of bhndb(4) region alloc_flags when
registering statically mapped port regions (caught by scan-build).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Upstream dts for allwinner will require a syscon driver, since the emac node
coming in 4.15 will be using xref to /soc/syscon for configuring the emac
clock. Add a generic syscon driver to attach to /soc/syscon for use by
if_awg, providing basic read/write functionality to consumers.
syscon driver will also be used by arm64 at least for A64+H5 emac/if_awg.
Written by: mmel
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13295
during startup. When a brand new chip leaves the factory, it is in a
special power-saving mode that disables most functions on the chip to
save battery power. The chip is stuck in this mode until the first write
to the time registers, which automatically clears the special power-saving
mode and starts the oscillator.
Also, the day-of-week register in this chip counts 1-7, not 0-6, so write
the values accordingly.
These changes are based on the patch submitted by Brian Scott, but I
elimated warnings since this condition is expected, and added some comments,
and so in general blame me for any mistakes.
PR: 223642
These were made redundant in r325841.
Reviewed by: hselasky
MFC after: 1 week (hselasky will MFC)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13401
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
Summary:
As in /dev/fb, allow the framebuffer driver to override the default memattr for
mmap(2). This is analogous to the change in 306555.
Reviewed By: ray
Differential Revision: https://reviews.freebsd.org/D13331
Previously we set the csum_l3 flag for IPv4 and IPv6, but only IPv4
should have header checksumming applied.
Prompted by Linux commit fa6d7cb5d76cf0467c61420fc9238045aedfd379.
Reviewed by: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13366
Some bnxt devices do not correctly send frames smaller than
52 bytes (without CRC), so add a quirk that will pad frames to an
arbitrary size before passing off to the encap routine.
Reported by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13269
Currently, bwn(4) relies on the siba_bwn(4) bus driver to provide support
for the on-chip SSB interconnect found in Broadcom's older PCI(e) Wi-Fi
adapters. Non-PCI Wi-Fi adapters, as well as the newer BCMA interconnect
found in post-2009 Broadcom Wi-Fi hardware, are not supported by
siba_bwn(4).
The bhnd(4) bus driver (also used by the FreeBSD/MIPS Broadcom port)
provides a unified kernel interface to a superset of the hardware supported
by siba_bwn; by attaching bwn(4) via bhnd(4), we can support both modern
PCI(e) Wi-Fi devices based on the BCMA backplane interconnect, as well as
Broadcom MIPS WiSoCs that include a D11 MAC core directly attached to their
SSB or BCMA backplane.
This diff introduces opt-in bwn(4) support for bhnd(4) by providing:
- A small bwn(4) driver subclass, if_bwn_bhnd, that attaches via
bhnd(4) instead of siba_bwn(4).
- A bhndb(4)-based PCI host bridge driver, if_bwn_pci, that optionally
probes at a higher priority than the siba_bwn(4) PCI driver.
- A set of compatibility shims that perform translation of bwn(4)'s
siba_bwn function calls into their bhnd(9) API equivalents when bwn(4)
is attached via a bhnd(4) bus parent. When bwn(4) is attached via
siba_bwn(4), all siba_bwn function calls are simply passed through to
their original implementations.
To test bwn(4) with bhnd(4), place the following lines in loader.conf(5):
hw.bwn_pci.preferred="1"
if_bwn_pci_load="YES
bwn_v4_ucode_load="YES"
bwn_v4_lp_ucode_load="YES"
To verify that bwn(4) is using bhnd(4), you can check dmesg:
bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 15> ... on bhnd0
... or devinfo(8):
pcib2
pci2
bwn_pci0
bhndb0
bhnd0
bwn0
...
bwn(4)/bhnd(4) has been tested for regressions with most chipsets currently
supported by bwn(4), including:
- BCM4312
- BCM4318
- BCM4321
With minimal changes to the DMA code (not included in this commit), I was
also able to test support for newer BCMA devices by bringing up basic
working Wi-Fi on two previously unsupported, BCMA-based N-PHY chipsets:
- BCM43224
- BCM43225
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation & Plausible Labs
Differential Revision: https://reviews.freebsd.org/D13041
- Add missing call to device_delete_children() in bhndb_detach(), without
which we're left with stale child devices on module unload.
- Pass the parent PCI device to pci_release_msi(), not the bhndb_pci(4)
child.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
bhnd_chipc's children may hold strong provider references to their parent;
we must detach any children before attempting to deregister the bhnd_chipc
device as a bus service provider.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Driver support is only provided for ConnectX4/5.
System-time timestamp is calculated based on the free-running counter
timestamp provided by hardware. Driver periodically samples the
counter to calibrate it against the system clock and uses linear
interpolation to convert. Stability of the crystal which drives the
clock is +-50 ppm at the operational temperature, which makes the
algorithm good enough.
The calculation is somewhat delicate because all values are 64bit and
overflow the naive formula for linear interpolation. The calculation
drops the least significant bits in advance, see the PREC shift in
mlx5_mbuf_tstmp().
Hardware stamps can be turned off by 'ifconfig mceN -hwrxtsmp'. Buggy
firmware might result in small but visible errors in the reported
timestamps, detectable e.g. by nonsensical (negative) RTT values for
LAN pings.
Reviewed by: gallatin, hselasky
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D12638
Very early BHND Wi-Fi devices (e.g. BCM4318) do not support any form of
dynamic clock control; on these devices, any PMU requests that cannot be
met by the device's fixed clock state will return an appropriate error
code.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Very early (PCI_V0) Broadcom PCI Wi-Fi chipsets have a few quirks when
compared to later PCI(e) core revisions:
- The standard static BAR0 mapping of the PCI core registers is discontiguous,
with siba's cfg0 register block mapped distinctly from the other core
registers.
- No dedicated ChipCommon register mapping is provided; instead, the
single configurable register window must be used to access both
ChipCommon and D11 core registers. The D11 core's operational semantics
guarantee the safety of -- after disabling interrupts -- borrowing
the single dynamic register window to perform the few ChipCommon
operations required by a driver.
To support these early PCI devices:
- Allow defining multiple discontiguous BHNDB_REGWIN_T_CORE register
windows that map a single port/region, and producing bridged resource
allocations backed by those discontiguous windows.
- Support stealing existing register window allocations to fulfill indirect
bhnd(4) bus I/O requests within address ranges tagged with
BHNDB_ALLOC_FULFILL_ON_OVERCOMMIT.
- Fix an inverted test of bhndb_is_pcie_attached() that disabled
PCI-only clock bring-up required by these devices.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
The SIBA_QUIRK_PCIE_D11_SB_TIMEOUT quirk should match on all BCM4312
revisions, and backplane service timeouts must also be disabled.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Add missing support for specifying I/O control flags during core reset,
and resolve a number of siba(4)-specific reset issues:
- Add missing check for target reject flags in siba_is_hw_suspended().
- Remove incorrect wait on SIBA_TMH_BUSY when modifying any target state
register; this should only be done when waiting for initiated
transactions to clear.
- Add missing wait on SIBA_IM_BY when asserting SIBA_IM_RJ.
- Overwrite any previously set SIBA_TML_REJ flag when bringing the core
out of reset. This fixes a lockup that occured when we brought up a core
(after reboot) that had previously been placed into RESET by siba_bwn(4).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13039
This includes a number of copyedits for the inline code documentation
comments, updates to the existing bhnd(4), bhndb(4), bcma(4), and siba(4)
man pages, and new man pages for bhnd_chipc(4), bhnd_pmu(4), bhndb_pci(4),
bhnd(9), and bhnd_erom(9).
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13021
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This logic is still imperfect, since it allows at most 15 bidirectional
streams out of 30 allowed by specification, but at least now those should
work better. On the other side I don't remember I ever saw controller
supporting the bidirectional streams, so this is likely a nop change.
MFC after: 1 month
can be used prior to the ISCSIDHANDOFF IOCTL which set the negotiated values.
Else the login PDU will fail when passing the "-r" option to "iscsictl" which
means iSCSI over RDMA instead of TCP/IP.
Discussed with: np@ and trasz@
Sponsored by: Mellanox Technologies
MFC after: 1 week
The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.
These changes add support for:
- Writing raw voltage register values to PHY-specific LDO regulator
registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.
Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:
- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12664
BHND Wi-Fi chipsets and SoCs share a common DMA engine, operating within
backplane address space. To support host DMA on Wi-Fi chipsets, the bridge
core maps host address space onto the backplane; any host addresses must
be translated to their corresponding backplane address.
- Defines a new bhnd_get_dma_translation(9) API to support querying DMA
address translation parameters from the bhnd(4) bus.
- Extends bhndb(4) to provide DMA translation descriptors from a DMA
address translation table defined in the host bridge-specific
bhndb_hwcfg.
- Defines bhndb(4) DMA address translation tables for all supported host
bridge cores.
- Extends mips/broadcom's bhnd_nexus driver to return an identity (no-op)
DMA translation descriptor; no translation is required when addressing
the SoC backplane.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12582
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.
On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).
The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12518
the system time.
As we seem to only read this time on boot, and this is the only source of
time on many arm64 machines we need to enable this by default there. As
this is not always the case with U-Boot firmware, or when we have been
booted from a non-UEFI environment we only enable the device driver when
the Runtime Services are present and reading the time doesn't result in an
error.
PR: 212185
Reviewed by: imp, kib
Tested by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12650
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
XX_VirtToPhys(), by way of pmap_kextract(), is an expensive operation.
Profiling via dtrace during a series of iperf tests I found 16111 / 30432
stack frames were located in mmu_booke_kextract(), so eliminating this
expensive call should improve performance slightly. XX_PhysToVirt() is not
as expensive, but redundant calls in this context is wasteful.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
tunables. Add num_vis to the intrs_and_queues structure as it affects
the number of interrupts requested and queues created. In future
cfg_itype_and_nqueues might lower it incrementally instead of going
straight to 1 when enough interrupts aren't available.
Sponsored by: Chelsio Communications
Background:
The coming ibcore update forces an update of mlx4ib(4) which in turn requires
an updated mlx4 core module. This also affects the mlx4en(4) module because
commonly used APIs are updated. This commit is a middle step updating the
mlx4 modules towards the new ibcore.
This change contains no major new features.
Changes in mlx4:
a) Improved error handling when mlx4 PCI devices are
detached inside VMs.
b) Major update of codebase towards Linux 4.9.
Changes in mlx4ib(4):
a) Minimal changes needed in order to compile using the
updated mlx4 core APIs.
Changes in mlx4en(4):
a) Update flow steering code in mlx4en to use new APIs for
registering MAC addresses and IP addresses.
b) Update all statistics counters to be 64-bit.
c) Minimal changes needed in order to compile using the
updated mlx4 core APIs.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The setbit/clearbit pair casts the bitfield pointer
to uint8_t* which effectively treats its contents as
little-endian variable. The ffs() function accepts int as
the parameter, which is big-endian. Use uint8_t here to
avoid mismatch, as we have only 4 doorbells.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D13084
No longer return ENXIO when trying to send an IPv6 packet in
nicvf_sq_add_hdr_subdesc().
Restructure the code so that the upper layer protocol parts are
agnostic of the L3 protocol (and no longer specific to IPv4).
With this basic IPv6 packets go through. We are still seeing
weird behaviour which needs further diagnosis.
PR: 223669
In collaboration with: emaste
MFC after: 3 days
The driver is currently hardcoded to force promiscuous mode, so all of
the MAC filtering code is presently unused and multicast should "just
work." Report to the higher layers that multicast is supported.
PR: 223573
Reported by: bz
Sponsored by: The FreeBSD Foundation, Packet.net (hardware)
Different compilers may optimise the enum type in different ways. This ensures
coherency when range checking the value of enums in ibcore.
Sponsored by: Mellanox Technologies
MFC after: 1 week
information for that and XPT_PATH_INQ. Provide macros to encode/decode
major/minor versions. Read the link speed and lane count to compute
the base_transfer_speed for XPT_PATH_INQ.
Sponsored by: Netflix
