The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
glibc-based interface.
Unfortunately, the glibc maintainers, despite knowing the existence
of the FreeBSD qsort_r(3) interface in 2004 and refused to add the
same interface to glibc based on grounds of the lack of standardization
and portability concerns, has decided it was a good idea to introduce
their own qsort_r(3) interface in 2007 as a GNU extension with a
slightly different and incompatible interface.
With the adoption of their interface as POSIX standard, let's switch
to the same prototype, there is no need to remain incompatible.
C++ and C applications written for the historical FreeBSD interface
get source level compatibility when building in C++ mode, or when
building with a C compiler with C11 generics support, provided that
the caller passes a fifth parameter of qsort_r() that exactly matches
the historical FreeBSD comparator function pointer type and does not
redefine the historical qsort_r(3) prototype in their source code.
Symbol versioning is used to keep old binaries working.
MFC: never
Relnotes: yes
Reviewed by: cem, imp, hps, pauamma
Differential revision: https://reviews.freebsd.org/D17083
The driver parsed the table to update the relevant resource map
registers, but failed to write the new register value after computing
it.
Reported by: -Wunused-but-set-variable
Reviewed by: landonf, imp
Differential Revision: https://reviews.freebsd.org/D34814
Add bus_topo_assert() and implmement it as GIANT_REQUIRED for the
moment. This will allow us to change more easily to a newbus-specific
lock int he future.
Sponsored by: Netflix
Reviewed by: wulf, mav, jhb
Differential Revision: https://reviews.freebsd.org/D31833
Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlocked with bus_topo_unlock(). If you need the topology lock for
some reason, bus_topo_mtx() will provide that.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D31831
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
bhnd_nv_strdup/bhnd_nv_strndup.
If malloc(9) failed during initial bhnd(4) attach, while allocating the root
NVRAM path string ("/"), the returned NULL pointer would be passed as the
destination to memcpy().
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Previously, the address regions described by disabled admatch entries would
be treated as being mapped to the given core; while incorrect, this was
essentially harmless given that the entries describe unused address space
on the few affected devices.
We now perform parsing of per-core admatch registers and interrupt flags in
siba_erom, correctly skip any disabled admatch entries, and use the
siba_erom API in siba_add_children() to perform enumeration of attached
cores.
- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13518
any children prior to detach.
With the newbus child deletion ordering changes introduced in r307518,
parent devices are now detached (and their driver set to NULL) prior to
detaching and deleting child devices; child-related bus methods (e.g.
BUS_CHILD_DETACHED, BUS_CHILD_DELETED) are no longer be dispatched to the
parent device driver after it returns 0 (success) from DEVICE_DETACH.
Sponsored by: The FreeBSD Foundation
- Extend the probe method to accept devclasses that inherit from the pci
devclass (e.g. cardbus).
- Some BCM4306-based CardBus adapters appear to advertise 4K SPROM, but
only the first 2K is mapped into BAR0. We can safely assume that the
SPROM data fits within the first 2K of the SPROM, rather than rejecting
the SPROM mapping as invalid.
Sponsored by: The FreeBSD Foundation
- Do not panic on siba(4) detach when the bhnd(4) bus calls
bhnd_get_pmu_info() on a PMU-less device.
- Fix bhnd_pwrctl attach/detach on fixed-clock devices:
- Treat bhnd_pwrctl_updateclk() as a no-op on fixed-clock devices.
- Use bhnd_pwrctl_updateclk() to perform the appropriate clock
transition on detach.
Sponsored by: The FreeBSD Foundation
On a SPROM-less device, the PCI(e) bridge core will be initialized with its
power-on-reset defaults; this can leave the SPROM-derived BHND_PCI_SRSH_PI
value pointing to the wrong backplane address. This value is used by the
PCI core when performing address translation between the static register
windows in BAR0 that map the PCI core's register block, and backplane
address space.
Previously, bhndb_pci(4) incorrectly used the potentially invalid static
BAR0 PCI register windows when attempting to correct the BHND_PCI_SRSH_PI
value in the PCI core's SPROM shadow.
Instead, we now read/update BHND_PCI_SRSH_PI by fetching the PCI core's
backplane address from the core enumeration table, and then using a dynamic
register window to explicitly map the PCI core's register block into BAR0.
Sponsored by: The FreeBSD Foundation
The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
- Fix reference of uninitialized error value in bhndb_generic_resume() if
the dynamic window count is 0.
- Fix incorrect bhnd_pmu(4) UPTME_MASK and PLL0_PC2_WILD_INT_MASK
constants.
- Variable definitions referenced by our generated SPROM layouts will never
be NULL, but add explicit asserts to make that clear.
- Add missing variable initialization in bhnd_nvram_sprom_ident().
- Fix leak of driver array in bhnd_erom_probe_driver_classes().
- Fix zero-length memset() in bhndb_pci_eio_init().
- Fix an off-by-one error and potential invalid OOBSEL bit shift operation
in bcma_dinfo_init_intrs().
- Remove dead code in siba_suspend_hw().
- Fix duplicate call to bhnd_pmu_enable_regulator() in both the enable and
disable code paths of bhnd_compat_cc_pmu_set_ldoparef().
Reported by: Coverity
CIDs: 1355194, 1362020, 1362022, 1373114, 1366563, 1373115,
1381569, 1381579, 1383555, 1383566, 1383571
Sponsored by: The FreeBSD Foundation
- The window target must always be updated when stealing a register window.
- Fix missing initialization of bhndb(4) region alloc_flags when
registering statically mapped port regions (caught by scan-build).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
