Modern GCC and Clang simply ignore the qualifier, while the old base GCC
produces a warning (treated as an error in the kernel build).
Approved by: cem
MFC after: 5 days
it in emergency in sc_cnputc().
Locking fixes in sc_cnputc() previously turned off normal output in
near-deadlock conditions and added deferred output which might never
be completed. Emergency output goes to the frame buffer using
sufficiently atomic non-blocking writes if the console is in text
mode (in graphics mode, nothing is done, modulo races setting the
graphics mode bit). Screen updates overwrite the emergency output
if the emergency condition clears enough to reach them.
ec_putc() also works for "early" console output in normal x86 text
mode as soon as this mode is initialized (if ever). This uses a
hard-coded x86 frame buffer address before cninit() and a hopefully
MI address after cninit(). But non-x86 is more likely to not support
text mode, when ec_putc() will be null. ec_putc() has no dependencies
of syscons before cninit(), and only has them later to track syscons'
mode changes. This commit doesn't attach ec_putc() for early use.
To test emergency use, put a breakpoint in central syscons output code
like sc_puts() and do some user output. The system used to race or
deadlock in ddb output soon after entry to ddb. The locking fixes
deferred the output until after leaving ddb, so ddb was unusable and
you had to try typing c[ontinue] blindly until it exited, or better use
a serial console in parallel. Now the output goes to a window in the
middle 2/3 of the screen. Scrolling is circular and there is no cursor,
but otherwise ec_putc() provides full dumb terminal functionality and
very fast output that hides artificates from dumb overwrites.
by the CPU number.
This was originally for debugging near-deadlock conditions where
multiple CPUs either deadlock or scramble each other's output trying
to report the problem, but I found it interesting and sometimes
useful for ordinary kernel messages. Ordinary kernel messages
shouldn't be interleaved, but if they are then the colorization
makes them readable even if the interleaving is for every character
(provided the CPU printing each message doesn't change).
The default colors are 8-15 starting at 15 (bright white on black)
for CPU 0 and repeating every 8 CPUs. This works best with 8 CPUs.
Non-bright colors and nonzero background colors need special
configuration to avoid unreadable and ugly combinations so are not
configured by default. The next bright color after 15 is 8 (bright
black = dark gray) is not very readable but is the only other color
used with 2 CPUs. After that the next bright color is 9 (bright
blue) which is not much brighter than bright black, but is used with
3+ CPUs. Other bright colors are brighter.
Colorization is configured by default so that it gets tested. It can
only be turned off by configuring SC_KERNEL_CONS_ATTR to anything other
than FG_WHITE. After booting, all colors can be changed using the
syscons.kattr sysctl. This is a SYSCTL_OPAQUE, and no utility is
provided to change it (sysctl only displays it).
The default colors work in all VGA modes that I could test. In 2-color
graphics modes, all 8 bright colors are displayed as bright white, so
the colorization has no effect, but anything with a nonzero background
gives white on white unless the foreground is zero. I don't have an
mono or VGA grayscale hardware to test on. Support for mono mode seems
to have never worked right in syscons (I think bright white gives white
underline with either bold or bright), but VGA grayscale should work
better than 2-color graphics.
I imagine that the module would be useful only to a very limited number
of developers, so that's my excuse for not writing any documentation.
On a more serious note, please see DRAM Error Injection section of BKDGs
for families 10h - 16h. E.g. section 2.13.3.1 of BKDG for AMD Family 15h
Models 00h-0Fh Processors.
Many thanks to kib for his suggestions and comments.
Discussed with: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9824
ULPs can set a qp's state to ERROR and then post a work request on the
sq and/or rq. When the reply for that work request comes back it is
guaranteed that all previous work requests posted on that queue have
been drained.
Obtained from: Chelsio Communications
MFC after: 3 days
Sponsored by: Chelsio Communications
registered. T4/5/6 have no internal limit on this size. This is
probably a copy paste from the T3 iw_cxgb driver.
MFC after: 3 days
Sponsored by: Chelsio Communications
TW_CL_MAX_NUM_LUNS should not be 16 but I presume 255. I have a 3ware
controller with more than 16 volumes (LUN's) and otherwise all LUN's
above the 16'th are not working.
Submitted by: jcatrysse <j.catrysse@proximedia.be>
Pull Request: https://github.com/freebsd/freebsd/pull/100
left-click event. It can be disabled setting the new
hw.usb.wsp.enable_single_tap_clicks sysctl to 0.
Submitted by: K Staring <qdk@quickdekay.net>
Pull Request: https://github.com/freebsd/freebsd/pull/97
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Sockets representing the TCP endpoints for iWARP connections are
allocated by the ibcore module. Before this revision they were closed
either by the ibcore module or the iw_cxgbe hardware driver depending on
the state transitions during connection teardown. This is error prone
and there were cases where both iw_cxgbe and ibcore closed the socket
leading to double-free panics. The fix is to let ibcore close the
sockets it creates and never do it in the driver.
- Use sodisconnect instead of soclose (preceded by solinger = 0) in the
driver to tear down an RDMA connection abruptly. This does what's
intended without releasing the socket's fd reference.
- Close the socket in ibcore when the iWARP iw_cm_id is destroyed. This
works for all kinds of sockets: clients that initiate connections,
listeners, and sockets accepted off of listeners.
Reviewed by: Steve Wise @ Open Grid Computing, hselasky@
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9796
SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution would be to look on maximal ORB size supported by the target.
MFC after: 1 week
RSS hash type will be used to identify the CPU on to which, a receive packet
will be queued. This patch extracts the "RSS hash type" from the receive
completion and sends it to the stack.
Submitted by: Venkatkumar Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed by: shurd
Approved by: sbruno
MFC after: 1 week
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D9685
2. add sysctl to set pause frame parameters
3. increase max segs for TSO packets to BXE_TSO_MAX_SEGMENTS (32)
4. add debug messages for PHY
5. HW LRO support restricted to FreeBSD versions 8.x and above.
Submitted by:Vaishali.Kulkarni@cavium.com
MFC after:5 days
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.
This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.
Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785
vm_map_lookup_done should only be called when the gntdev has finished poking at
the entry.
Reported by: alc
Reviewed by: alc
MFC after: 1 week
Sponsored by: Citrix Systems R&D
During acpi_cmbat_attach() the acpi_cmbat_init_battery() notification
handler is registered. It has been observed this notification handler
can be called instantly, before the attach routine has returned. In
the notification handler there is a call to device_is_attached() which
returns false. Because the softc is set we know an attach is in
progress and the fix is simply to wait and try again in this case.
Reviewed by: avg @
MFC after: 1 week
The pl011 UART has a 16 entry Tx FIFO and a 16 entry Rx FIFO that
have not been used so far. Update the driver to enable the FIFOs
and use them in transmit and receive.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D8819
directly from the node.
- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups
Tested with:
- Intel 6205 (iwn(4)), STA mode;
- WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9811
Its more important for SPI HBAs, as they don't support CDBs above 12 bytes.
The new error code makes CAM to fall back to alternative commands.
MFC after: 2 weeks
This allows to properly handle cases when target wants to receive or send
more data then initiator wants to send or receive. Previously in such
cases isp(4) returned CAM_DATA_RUN_ERR, while now it returns resid > 0.
MFC after: 2 weeks
This change removes limitation of single S/G list entry and limitation on
maximal I/O size, using multiple data transfers per I/O if needed. Also
it removes code duplication between send and receive paths, which are now
completely equal.
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
pcib_request_feature allows drivers to request the firmware (ACPI)
release certain features it may be using. ACPI normally manages things
like hot plug, advanced error reporting and other features until the
OS requests ACPI to relenquish control since it is taking over.
Sponsored by: Netflix
- Check return code from initialization path; otherwise, vap state
may be wrong after an error.
- Do not try to run iwn_stop() / iwn_init() multiple times.
- Merge iwn_radio_on/off() and move RFKILL bit check into the task.
- Try to handle possible RF switch state change in S3 state (PR 181694).
PR: 181694
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9797
On Core2 and older Intel CPUs, where TSC stops in C2, system does not
allow C2 entrance if timecounter hardware is TSC. This is done by
tc_windup() which tests for TC_FLAGS_C2STOP flag of the new
timecounter and increases cpu_disable_c2_sleep if flag is set. Right
now init_TSC_tc() only sets the flag if cpu_deepest_sleep >= 2, but
TSC is initialized too early for this variable to be set by
acpi_cpu.c.
There is no reason to require that ACPI reported C2 and deeper states
to set TC_FLAGS_C2STOP, so remove cpu_deepest_sleep test from
init_TSC_tc() condition. And since this is the only use of the
variable, remove it at all.
Reported and submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Suggested by: jhb
MFC after: 2 weeks
