Some drives sometimes have errors for things like setting the number
of queue entries in the submission queue. The error paths taken for
these drives ensure a panic dereferencing uninialized data.
Sponsored by: Netflix
as kernel drivers and their dependency onto mmc(4); this allows for
incrementing the mmc(4) module version but also for entire omission
of these bridge declarations for mmccam(4) in a single place, i. e.
in dev/mmc/bridge.h.
Fix assumptions about name spaces in NVME driver. First, it assumes
cdata.nn is the number of configured devices. However, it is the
number of supported name spaces. Second, it assumes that there will
never be more than 16 name spaces supported, but a certain drive I'm
testing reports 1024. It assumes that name spaces are a tightly packed
namespace, but the standard seems to indicate otherwise. Finally, it
assumes that an error would be generated when quearying an
unconfigured namespace. Instead, it succeeds but the identify data is
all zeros.
Fix these by limiting the number of name spaces we probe to 16. Remove
aborting when we find one in error. When the size of the name space is
zero, ignore it.
This is admittedly a bandaide. The long term fix will be to
participate in the enumeration and name space change protocols
definfed in the NVNe standard.
Sponsored by: Netflix
This change tries to fix the most obvious locking problems.
sbp_cam_scan_lun() is never called with the sbp lock held, so the lock
needs to be acquired internally (if it's needed at all).
Without this change a kernel with INVARIANTS panics when a firewire disk
is connected:
panic: mutex sbp not owned at /usr/src/sys/dev/firewire/sbp.c:967
KDB: stack backtrace:
db_trace_self_wrapper() at 0xffffffff80420bbb = db_trace_self_wrapper+0x2b/frame 0xfffffe0504df0930
kdb_backtrace() at 0xffffffff80670359 = kdb_backtrace+0x39/frame 0xfffffe0504df09e0
vpanic() at 0xffffffff8063986c = vpanic+0x14c/frame 0xfffffe0504df0a20
panic() at 0xffffffff806395b3 = panic+0x43/frame 0xfffffe0504df0a80
__mtx_assert() at 0xffffffff8061c40d = __mtx_assert+0xed/frame 0xfffffe0504df0ac0
sbp_cam_scan_lun() at 0xffffffff80474667 = sbp_cam_scan_lun+0x37/frame 0xfffffe0504df0af0
xpt_done_process() at 0xffffffff802aacfa = xpt_done_process+0x2da/frame 0xfffffe0504df0b30
xpt_done_td() at 0xffffffff802ac2e5 = xpt_done_td+0xd5/frame 0xfffffe0504df0b80
fork_exit() at 0xffffffff805ff72f = fork_exit+0xdf/frame 0xfffffe0504df0bf0
fork_trampoline() at 0xffffffff8082483e = fork_trampoline+0xe/frame
0xfffffe0504df0bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
Also, I tried to reduce the scope of the sbp lock to avoid holding it
while doing bus_dma allocations.
The code badly needs some re-engineering. SBP really should implement
a CAM transport, so that it avoids control flow inversion when re-scanning
the bus. Also, the sbp lock seems to be too coarse.
Additionally, the commit includes some changes not related to locking.
- sbp_cam_scan_lun: restore CAM_DEV_QFREEZE before re-queueing the ccb
because xpt_setup_ccb resets ccb_h.flags
- sbp_post_busreset: call xpt_release_simq only if it's actually frozen
- don't place private SIMQ_FREEZED flag (sic, "freezed") into sim->flags,
use sbp->flags for that
- some style fixes and control flow enhancements
Reviewed by: sbruno
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9898
Currently netfront is setting the flags of inbound packets with the checksum
not present (offloaded) to (CSUM_IP_CHECKED | CSUM_IP_VALID | CSUM_DATA_VALID |
CSUM_PSEUDO_HDR). According to the mbuf(9) man page this is not the correct
combination of flags, it should instead be (CSUM_DATA_VALID |
CSUM_PSEUDO_HDR).
Reviewed by: Wei Liu <wei.liu2@citrix.com>
MFC after: 2 weeks
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D9831
Lock the xenstore request mutex when suspending user-space processes, in order
to prevent any process from holding this lock when going into suspension, or
else the xenstore suspend process is going to deadlock.
Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9638
When running on Xen, it's possible that a suspend request to the hypervisor
fails (return from HYPERVISOR_suspend different than 0). This means that the
suspend hasn't succeed, and the resume procedure needs to properly handle this
case.
First of all, when such situation happens there's no need to reset the vector
callback, hypercall page, shared info, event channels or grant table, because
it's state is preserved. Also, the PV drivers don't need to be reset to the
initial state, since the connection with the backed has not been interrupted.
Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9635
comments, marking unused parameters as such, style(9), whitespace,
etc.
o In the mmc(4) bridges and sdhci(4) (bus) front-ends:
- Remove redundant assignments of the default bus_generic_print_child
device method (I've whipped these out of the tree as part of r227843
once, but they keep coming back ...),
- use DEVMETHOD_END,
- use NULL instead of 0 for pointers.
o Trim/adjust includes.
This is mostly a version bump to stay in version number sync with firmware.
The only change there was cosmetic: Display degraded speed message upon
receiving Active Cable Exception Event with DEGRADED reason code.
Discussed with: slm@
MFC after: 1 week
all the clocks that they provide.
Each clocks are exported under the node 'clock.<clkname>' and have the following
children nodes :
- frequency
- parent (The selected parent, if any)
- parents (The list of parents, if any)
- childrens (The list of childrens, if any)
- enable_cnt (The enabled counter)
This give us the possibility to examine clocks at runtime and make graph of
the clock flow.
Reviewed by: mmel
MFC after: 2 month
Differential Revision: https://reviews.freebsd.org/D9833
For 4965 just extract 'is_chan_5ghz' flag from the RXON structure
(like it was done in r281287); for others it was never used.
Tested with Intel 6205, STA mode.
have been in the code all along, but were masked by having a fifo depth of
one byte at the hardware level, so everything kinda worked by accident.
The hardware interrupts when the TX fifo is half empty, so set
sc->sc_txfifosz to 8 bytes (half the hardware fifo size) to match. This
eliminates dropped characters on output.
Restructure the read loop to consume all the bytes in the fifo by using
the "rx fifo empty" bit of the flags register rather than the "rx ready"
bit of the interrupt status register. The rx-ready interrupt is cleared
when the number of bytes in the fifo fall below the interrupt trigger
level, leaving the fifo half full every time receive routine was called.
Now it loops until the fifo is completely empty every time (including
when the function is called due to a receive timeout as well as for
fifo-full).
Modern GCC and Clang simply ignore the qualifier, while the old base GCC
produces a warning (treated as an error in the kernel build).
Approved by: cem
MFC after: 5 days
it in emergency in sc_cnputc().
Locking fixes in sc_cnputc() previously turned off normal output in
near-deadlock conditions and added deferred output which might never
be completed. Emergency output goes to the frame buffer using
sufficiently atomic non-blocking writes if the console is in text
mode (in graphics mode, nothing is done, modulo races setting the
graphics mode bit). Screen updates overwrite the emergency output
if the emergency condition clears enough to reach them.
ec_putc() also works for "early" console output in normal x86 text
mode as soon as this mode is initialized (if ever). This uses a
hard-coded x86 frame buffer address before cninit() and a hopefully
MI address after cninit(). But non-x86 is more likely to not support
text mode, when ec_putc() will be null. ec_putc() has no dependencies
of syscons before cninit(), and only has them later to track syscons'
mode changes. This commit doesn't attach ec_putc() for early use.
To test emergency use, put a breakpoint in central syscons output code
like sc_puts() and do some user output. The system used to race or
deadlock in ddb output soon after entry to ddb. The locking fixes
deferred the output until after leaving ddb, so ddb was unusable and
you had to try typing c[ontinue] blindly until it exited, or better use
a serial console in parallel. Now the output goes to a window in the
middle 2/3 of the screen. Scrolling is circular and there is no cursor,
but otherwise ec_putc() provides full dumb terminal functionality and
very fast output that hides artificates from dumb overwrites.
by the CPU number.
This was originally for debugging near-deadlock conditions where
multiple CPUs either deadlock or scramble each other's output trying
to report the problem, but I found it interesting and sometimes
useful for ordinary kernel messages. Ordinary kernel messages
shouldn't be interleaved, but if they are then the colorization
makes them readable even if the interleaving is for every character
(provided the CPU printing each message doesn't change).
The default colors are 8-15 starting at 15 (bright white on black)
for CPU 0 and repeating every 8 CPUs. This works best with 8 CPUs.
Non-bright colors and nonzero background colors need special
configuration to avoid unreadable and ugly combinations so are not
configured by default. The next bright color after 15 is 8 (bright
black = dark gray) is not very readable but is the only other color
used with 2 CPUs. After that the next bright color is 9 (bright
blue) which is not much brighter than bright black, but is used with
3+ CPUs. Other bright colors are brighter.
Colorization is configured by default so that it gets tested. It can
only be turned off by configuring SC_KERNEL_CONS_ATTR to anything other
than FG_WHITE. After booting, all colors can be changed using the
syscons.kattr sysctl. This is a SYSCTL_OPAQUE, and no utility is
provided to change it (sysctl only displays it).
The default colors work in all VGA modes that I could test. In 2-color
graphics modes, all 8 bright colors are displayed as bright white, so
the colorization has no effect, but anything with a nonzero background
gives white on white unless the foreground is zero. I don't have an
mono or VGA grayscale hardware to test on. Support for mono mode seems
to have never worked right in syscons (I think bright white gives white
underline with either bold or bright), but VGA grayscale should work
better than 2-color graphics.
I imagine that the module would be useful only to a very limited number
of developers, so that's my excuse for not writing any documentation.
On a more serious note, please see DRAM Error Injection section of BKDGs
for families 10h - 16h. E.g. section 2.13.3.1 of BKDG for AMD Family 15h
Models 00h-0Fh Processors.
Many thanks to kib for his suggestions and comments.
Discussed with: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9824
ULPs can set a qp's state to ERROR and then post a work request on the
sq and/or rq. When the reply for that work request comes back it is
guaranteed that all previous work requests posted on that queue have
been drained.
Obtained from: Chelsio Communications
MFC after: 3 days
Sponsored by: Chelsio Communications
registered. T4/5/6 have no internal limit on this size. This is
probably a copy paste from the T3 iw_cxgb driver.
MFC after: 3 days
Sponsored by: Chelsio Communications
TW_CL_MAX_NUM_LUNS should not be 16 but I presume 255. I have a 3ware
controller with more than 16 volumes (LUN's) and otherwise all LUN's
above the 16'th are not working.
Submitted by: jcatrysse <j.catrysse@proximedia.be>
Pull Request: https://github.com/freebsd/freebsd/pull/100
left-click event. It can be disabled setting the new
hw.usb.wsp.enable_single_tap_clicks sysctl to 0.
Submitted by: K Staring <qdk@quickdekay.net>
Pull Request: https://github.com/freebsd/freebsd/pull/97
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Sockets representing the TCP endpoints for iWARP connections are
allocated by the ibcore module. Before this revision they were closed
either by the ibcore module or the iw_cxgbe hardware driver depending on
the state transitions during connection teardown. This is error prone
and there were cases where both iw_cxgbe and ibcore closed the socket
leading to double-free panics. The fix is to let ibcore close the
sockets it creates and never do it in the driver.
- Use sodisconnect instead of soclose (preceded by solinger = 0) in the
driver to tear down an RDMA connection abruptly. This does what's
intended without releasing the socket's fd reference.
- Close the socket in ibcore when the iWARP iw_cm_id is destroyed. This
works for all kinds of sockets: clients that initiate connections,
listeners, and sockets accepted off of listeners.
Reviewed by: Steve Wise @ Open Grid Computing, hselasky@
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9796
SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution would be to look on maximal ORB size supported by the target.
MFC after: 1 week
RSS hash type will be used to identify the CPU on to which, a receive packet
will be queued. This patch extracts the "RSS hash type" from the receive
completion and sends it to the stack.
Submitted by: Venkatkumar Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed by: shurd
Approved by: sbruno
MFC after: 1 week
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D9685
2. add sysctl to set pause frame parameters
3. increase max segs for TSO packets to BXE_TSO_MAX_SEGMENTS (32)
4. add debug messages for PHY
5. HW LRO support restricted to FreeBSD versions 8.x and above.
Submitted by:Vaishali.Kulkarni@cavium.com
MFC after:5 days
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.
This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.
Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785
vm_map_lookup_done should only be called when the gntdev has finished poking at
the entry.
Reported by: alc
Reviewed by: alc
MFC after: 1 week
Sponsored by: Citrix Systems R&D
During acpi_cmbat_attach() the acpi_cmbat_init_battery() notification
handler is registered. It has been observed this notification handler
can be called instantly, before the attach routine has returned. In
the notification handler there is a call to device_is_attached() which
returns false. Because the softc is set we know an attach is in
progress and the fix is simply to wait and try again in this case.
Reviewed by: avg @
MFC after: 1 week
The pl011 UART has a 16 entry Tx FIFO and a 16 entry Rx FIFO that
have not been used so far. Update the driver to enable the FIFOs
and use them in transmit and receive.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D8819