Commit Graph

645 Commits

Author SHA1 Message Date
Matt Jacob
c4270cb6d7 CAM_NEW_TRAN_CODE placeholders for SAS support.
Reviewed by:	nate, ken, justin
MFC after:	1 month
2006-01-20 19:21:38 +00:00
Matt Jacob
fba92123ac Fix ioctl to not get swallowed by ioctl code (i.e., make sure the darned
code sticks within 8 bits)

MFC after:	1 week
2006-01-18 08:37:27 +00:00
Matt Jacob
de8fa52e52 Incorporate the O_NONBLOCK open semantics of Linux and Solaris. This allows
an application to upon a tape (yea, even the non-control device) even if
it cannot establish a mount session. If the open cannot establish a mount
session and O_NONBLOCK was specified, the tape becomes 'open pending mount'.
All I/O operations that would require access to a tape thereafter until
a close attempt to initiate the mount session. If the mount session succeeds,
the tape driver transitions to full open state, else returns an appropriate
I/O error (ENXIO).

At the same time, add a change that remembers whether tape is being opened
read-only. If so, disallow 'write' operations like writing filemarks that
bypass the normal read-only filtering operations that happen in the write(2)
syscall.

Reviewed by:	ken, justin, grog
MFC after:	2 weeks
Suggested by:	The Bacula Team
2006-01-14 14:32:41 +00:00
Marcus Alves Grando
fa1d87f552 Allow to use Time DPA20B 1GB MP3 Player [1]
Allow to use Qware BeatZkey! Pro [2]

PR:             usb/81846 [1], usb/79164 [2]
Submitted by:   Ruben de Groot <rdg@bzerk.org> [1], Radek Kozlowski <radek@raadradd.com> [2]
Approved by:    njl
MFC:            1 week
2006-01-13 11:33:40 +00:00
Ian Dowse
d3ef345454 When deregistering a bus, attempt to flush out all outstanding
operations before returning. Point the bus at a dummy cam_sim
structure so that any CCBs will complete immediately with a
CAM_DEV_NOT_THERE status, and ensure that any xpt_schedule() calls
on the bus's devices will immediately call the peripheral's
periph_start() routine. Also repeat the async messages because
devices that were part of the way through being probed may appear
after the original AC_LOST_DEVICE was sent, and would otherwise
never go away.

These changes make it possible to deregister a bus and free the SIM
at most stages during bus probing without the usual crashes in
camisr(). In particular, plugging in a umass device and then
unplugging it as soon as the first probe messages appeared would
almost always result in a crash. Now the device just goes away with
a few CAM errors and all references to the CAM bus, target and
device are dropped correctly.
2006-01-11 02:06:08 +00:00
Ian Dowse
9a014e6f69 There should be no need to retry when the CCB status code is
CAM_LUN_INVALID or CAM_TID_INVALID. Retries were being triggered
here when a umass device was unplugged, and while the retries
themselves are probably harmless, they complicated finding the real
SIM removal problems.
2006-01-08 20:04:55 +00:00
Pawel Jakub Dawidek
1236085a67 Style nit. 2005-12-19 03:43:48 +00:00
Pawel Jakub Dawidek
ef5d77f464 Allow to use TransFlash drive, which can be found in Motorola E398 Mobile Phone.
PR:		usb/89889
Submitted by:	Wojciech A. Koszek <dunstan@freebsd.czest.pl>
MFC after:	1 week
2005-12-19 03:27:28 +00:00
John Polstra
a7e69e8b7d Fix a bug that caused some /dev entries to continue to exist after
the underlying drive had been hot-unplugged from the system.  Here
is a specific example.  Filesystem code had opened /dev/da1s1e.
Subsequently, the drive was hot-unplugged.  This (correctly) caused
all of the associated /dev/da1* entries to be deleted.  When the
filesystem later realized that the drive was gone it closed the
device, reducing the write-access counts to 0 on the geom providers
for da1s1e, da1s1, and da1.  This caused geom to re-taste the
providers, resulting in the devices being created again.  When the
drive was hot-plugged back in, it resulted in duplicate /dev entries
for da1s1e, da1s1, and da1.

This fix adds a new disk_gone() function which is called by CAM when a
drive goes away.  It orphans all of the providers associated with the
drive, setting an error condition of ENXIO in each one.  In addition,
we prevent a re-taste on last close for writing if an error condition
has been set in the provider.

Sponsored by:   Isilon Systems
Reviewed by:    phk
MFC after:      1 week
2005-11-18 02:43:49 +00:00
Matt Jacob
3b87a552e4 Make the exploring of all luns supported by an HBA more of a
tunable (until we get REPORT LUNS in place).

If we're probing luns, and each probe succeeds, we keep going past
lun 7 if we're a SCSI3 or better device (until we fail to probe).

If we're probing luns, and a probe fails, we only keep going if
we're quirked *for* it (CAM_QUIRK_HILUNS), and if we're not quirked
*against* it (CAM_QUIRK_NOHILUNS), or we're a SCSI3 or better device
and the tunable (kern.cam.cam_srch_hi) is set non-zero.

Reviewed by:	nate@rootlabs.org, gibbs@scsiguy.com, ken@kdm.com, scottl@samsco.org
MFC after:	1 week
2005-09-16 01:26:17 +00:00
Robert Watson
6a113b3de7 Merge the dev_clone and dev_clone_cred event handlers into a single
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do.  This avoids having multiple event handler types and
fall-back/precedence logic in devfs.

This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.

Requested by:	phk
MFC after:	3 days
2005-08-08 19:55:32 +00:00
Suleiman Souhlal
571dcd15e2 Fix the recent panics/LORs/hangs created by my kqueue commit by:
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.

- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.

Reviewed by:	jmg
Approved by:	re (scottl), scottl (mentor override)
Pointyhat to:	ssouhlal
Will be happy:	everyone
2005-07-01 16:28:32 +00:00
Tai-hwa Liang
362abc449c - Providing fine-grained malloc statistic by replacing M_DEVBUF with
module-specific malloc types.  These should help us to pinpoint the
  possible memory leakage in the future.
- Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based
  CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb.  Hopefully
  this would be helpful if someday we move the CCB allocator to use UMA
  instead of malloc().

Encouraged by:	jeffr, rwatson
Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
2005-07-01 15:21:30 +00:00
Tai-hwa Liang
7c20d5d795 Fixing a memory leak in xpt_release_device(), which can be quickly
(depends on how many memory you have) observed through "tar -tvf /dev/sa0."

   Without this patch, RELENG_5 and HEAD panics with something like:

     kmem_malloc(4096): kmem_map too small: 42258432 total allocated

   RELENG_4 doesn't panic but spews following errors:

     camq_init: - cannot malloc array!

Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
MFC after:	3 days
2005-06-24 08:09:05 +00:00
Pawel Jakub Dawidek
965d0c7edc Add a quirk for my pen-drive. 2005-06-09 17:35:04 +00:00
Alexander Kabaev
693937214b Do not initialize path variable with useless value just before
xpt_create_path overwrites it anyway.

Noticed by:     Coverity Prevent analysis tool
2005-05-11 17:39:33 +00:00
Doug White
2891ace6c8 Add quirk for TEAC USB floppy drives. 2005-05-05 18:48:41 +00:00
Matt Jacob
e3e16e9998 Make sure we look at the correct sub op codes when
deciding whether it's an operation we can perform
via the control device.

PR:		kern/72010
MFC after:	1 week
2005-04-14 04:51:18 +00:00
Matt Jacob
cd6640869b Take constructive advice from njl && reformat
previously added quirks slightly.
2005-04-14 04:46:46 +00:00
Nate Lawson
bc82a81ab5 Quirk for ZICPlay USB MP3 Player.
PR:		kern/75057
Submitted by:	Aurelien Nephtali <aurelien.nephtali wanadoo.fr>
2005-04-14 04:31:48 +00:00
Matt Jacob
4a296eb866 Apply quirk.
PR:		57469
Submitted by:	walter@pelissero.de
MFC after:	1 week
2005-04-14 04:12:45 +00:00
Matt Jacob
dbd93079d3 Applied conservative version of suggested quirk.
PR:		57468
Submitted by:	walter@pelissero.de
MFC after:	1 week
2005-04-14 04:05:00 +00:00
Matt Jacob
b1ce2b3e22 Apply quirk suggested by submitter.
PR:		75486
Submitted by:	no_bs@web.de
MFC after:	1 week
2005-04-14 03:59:48 +00:00
Matt Jacob
8b11740052 The divide by zero panic must have been due to a bogus
period value. I suppose the BT adapter driver should be
fixed, but more importantly we should protect against
dividing by zero.

PR:		kern/75603
MFC after:	1 week
2005-04-14 03:52:50 +00:00
Sam Leffler
aadbcea379 avoid use after free
Submitted by:	gibbs
Reviewed by:	mdodd
Approved by:	Coverity Prevent analysis tool
2005-03-31 21:43:19 +00:00
Sam Leffler
ec04feb21b avoid use after free
Submitted by:	gibbs
Reviewed by:	mdodd
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:42:49 +00:00
Poul-Henning Kamp
f4f6abcb4e Explicitly hold a reference to the cdev we have just cloned. This
closes the race where the cdev was reclaimed before it ever made it
back to devfs lookup.
2005-03-31 12:19:44 +00:00
Kenneth D. Merry
53372d3a6d Fix a problem with the cd(4) driver -- the CAMGETPASSTHRU ioctl wouldn't
succeed if there was no media in the drive.

This was broken in rev 1.72 when the media check was added to cdioctl().

For now, check the ioctl group to decide whether to check for media or not.
(We only need to check for media on CD-specific ioctls.)

Reported by:	bland
MFC after:	3 days
2005-03-26 06:05:06 +00:00
Kenneth D. Merry
b3b73720f2 Fix a place where we were referencing a pointer after it had been freed.
Submitted by:	"Henry Miller" <hank@blackhole.com>
MFC after:	3 days
2005-03-26 04:21:11 +00:00
Justin T. Gibbs
df8f908079 Restore queue depth settings across tag disable events. The system often
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices.  Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.

During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices.  The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.

MFC: 3 days
2005-03-23 16:43:29 +00:00
Scott Long
e3f3b2ed9f Don't free the SIM object twice.
Submitted by: Coverity Prevent analysis tool
2005-03-19 06:32:57 +00:00
Scott Long
38cedb4414 Reference a pointer correctly when copying to it's location.
Submitted by: Coverity Prevent analysis tool
2005-02-21 00:28:36 +00:00
Scott Long
01910bab7d Check the correct periph pointer after search for it.
Submitted by: Coverity Prevent analysis tool
2005-02-20 23:51:20 +00:00
Scott Long
661658a6fa Protect against trying to free a non-existant peripheral.
Submitted by: Coverity Prevent analysis tool
MFC After: 3 days
2005-02-20 23:45:49 +00:00
Scott Long
ac8be89de5 Remove a shadow declaration of 'error' that caused certain tests to be
pointless.

Submitted by: Coverity Prevent analysis tool
2005-02-12 04:51:19 +00:00
Scott Long
ef3cf714a4 Provide locking for the ccb_bioq. This allows xpt_done() to be called without
Giant held.  In camisr(), move the ccb_bioq elements to a temporary local list
and then process the elements off of that list.  This enables the list to be
processed by only taking the ccb_bioq_lock once and only for a very short
time.

ccb_bioq_lock is a leaf mutex, so it's fine to call xpt_done() with other
locks held.  This is just a very minor step in the work to lock CAM, but
it allows us to avoid some messy locking/unlock dances in certain drivers.
2005-02-09 11:44:15 +00:00
Maxim Sobolev
4379219537 Boot away another stackgap (one of the lest ones in linuxlator/i386) by
providing special version of CDIOCREADSUBCHANNEL ioctl(), which assumes that
result has to be placed into kernel space not user space. In the long run
more generic solution has to be designed WRT emulating various ioctl()s
that operate on userspace buffers, but right now there is only one such
ioctl() is emulated, so that it makes little sense.

MFC after:	2 weeks
2005-01-30 08:12:37 +00:00
Michael Reifenberger
8924340f2f Add quirk for easyRAID ER5 alias areca ARC-6010.
It reports itself as SCSI-3 but doesnt like getting probed on  high luns
because it hangs hard after finding itself again on lun 32...

Suggested by: Kenneth Merry
2005-01-25 08:59:06 +00:00
Matt Jacob
f4322bc884 This is a somewhat imperfect means to try and bring FreeBSD forward in
its ability to automatically scan and attach luns for modern storage
which has luns in the 0..1000 range, not 0..7.

The correct thing would be to do REPORT LUNS for devices whose LUN0
version shows a version >= SCSI3, but lacking that we should be able
to search higher than LUN 7 if we're >= SCSI3 with no ill effects.

This change keeps all of the QUIRK_HILUNS quirks, obeys the QUIRK_NOLUNS,
and introduces a QUIRK_NOHILUNS which will keep searches above LUN 7
happening for devices that report >= SCSI3 compliance. I doubt the latter
will be needed, but you never know.

This allowed me to randomly scan and attach  > 500 disks at a time in
a situation where quirking for QUIRK_HILUNS wasn't practical (the
vendor id and product id changes of the virtualization changes
constantly).

Reviewed by:	ken@freebsd.org, scottl@freebsd.org, gibbs@freebsd.org
MFC after:	2 weeks
2005-01-22 22:46:45 +00:00
Matt Jacob
c81d2c74ac Don't pass unadulterated unit numbers to make_dev and its ilk- if you
have more than 256 units, you die. Horribly. Convert them using
unit2minor.

MFC after:	1 week
2005-01-22 07:21:25 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Justin T. Gibbs
9a4f1a4dd4 Correct another location where inquiry length as calculated from the
inquiry additional length field is off by one.

MFC: 3 days
2004-11-18 07:24:29 +00:00
Justin T. Gibbs
709a936f1f Correct an off-by-one in the calculation of the inquiry buffer length
to request from devices during the "long inquiry" portion of our probe.
This same bug was fixed in the 4.x stream a few years ago, but the fix
was never propogated to -current.

This fix is slightly different than in -stable:

 o Use offsetof() instead of a hard coded constant so as the make
   the code more self-explainatory.

 o Round odd long inquiry lengths up so as to avoid tickling ignore
   wide residue bugs in broken parallel SCSI devices running with a
   wide transfer negotiation.

MFC: 3 days
2004-11-18 04:14:32 +00:00
Bruce M Simpson
23e0012d02 Remove references to the second byte of a CCB containing the LUN, as this
is valid only for SCSI-2 and older devices.
Rename the second byte of the VERIFY CCB from 'lun' to 'byte2'.

Submitted by:	ken
MFC after:	2 weeks
2004-10-13 09:31:04 +00:00
Bruce M Simpson
c68a9309c3 Add necessary data structures and definitions for the 12-byte SCSI
commands READ_FORMAT_CAPACITIES, WRITE_AND_VERIFY, and VERIFY.

Reviewed by:	ken, scottl
Source:		USB Mass Storage UFI Specification v1.0
MFC after:	2 weeks
2004-10-12 08:55:02 +00:00
Scott Long
2e8f0ae68c Remove the camnet swi and CAM_PERIPH_NET. It has never been used, and given
that netowrk-over-scsi never really took off, there is little chance that
it will ever be needed.
2004-10-05 04:22:20 +00:00
Poul-Henning Kamp
5ae652c0ed For removable devices without media we set a zero mediasize but a non-zero
sectorsize in order to avoid a lot of checks around various divisions etc.

Enforce the sectorsize being > 0 with a KASSERT on successful open.

Fix scsi_cd.c to return 2k sectors when no media inserted.
2004-09-05 21:15:58 +00:00
Justin T. Gibbs
74c91ec564 Correct a typo in a comment: alloation->allocation
Reported by: Jens Schweikhardt <schweikh@schweikhardt.net>
2004-08-30 20:14:21 +00:00
Dag-Erling Smørgrav
0eac4495db Remove the HW_WDOG option; it serves no purpose.
MFC after:	3 days
2004-08-29 11:10:09 +00:00
John-Mark Gurney
ad3b9257c2 Add locking to the kqueue subsystem. This also makes the kqueue subsystem
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers.  Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.

Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks.  Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).

Reviewed by:	green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00