This reverts commit 8534e6be81, and adds
a cautionary note that there are dragons about that should be considered
when changing it.
PR: 267026
Reviewed by: dim, imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D36981
This reverts commit 76e6e4d72f.
Several programs in the tree use -1 instead of INT_MAX to use
the maximum value. Thanks to Eugene Grosbein for pointing this
out.
Ensure that a negative backlog argument is handled as it if was 0.
Reviewed by: markj@, glebius@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D31821
This reverts commit 1c2be25f60.
kib@ pointed out that it is perfectly fine to write at arbitrary regular
file offsets. For example, in a 4K block size character device, geom
doesn't support writing / reading 515 byte blocks. The description is
perhaps not applicable to all EINVALs returned.
The read system call will return EINVAL if the current file offset is
not a multiple of the block size. This also applies to write(2). Add an
entry for EINVAL about this error to both man pages.
PR: 91149
Event: Aberdeen Hackathon 2022
Differential Revision: https://reviews.freebsd.org/D24617
Rather than not including it on all 64-bit platforms, just include it on
32-bit ones.
Reviewed by: imp, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36422
The MACHINE_ABI and TARGET_ABI variables are used to set the middle of
the target triple (e.g., "-unknown-" or "-gnueabihf-"). They are not set
by any tool in the base system and I've only found the latter mentioned
in one review online. As such, rename them to to MACHINE_TRIPLE_ABI and
TARGET_TRIPLE_ABI to clear the way to use MACHINE_ABI as a supplement to
MACHINE_CPU, etc.
Reviewed by: imp, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36420
Use time_t rather than uint32_t to represent the timestamps. That means
we have 64 bits rather than 32 on all platforms except i386, avoiding
the Y2K38 issues on most platforms.
Reviewed by: Zhenlei Huang
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36837
From enh at google.com via openbsd-tech mailing list via pfg@:
The existing test is wrong for LP64, where size_t has twice as many
relevant bits as int, not just one. (Found by inspection by
rprichard.)
Division by zero triggers an arithmetic exception and should not be very
common. Predict this.
No functional change intended.
MFC after: 1 week
Sponsored by: NVIDIA Networking
DevPathToTextUsbWWID allocates a separate copy of the SerialNumber
string to append a null terminator if the original string is not
null terminated. However, by using AllocateCopyPool, it tries to
copy 'Length + 1' words from the existing string containing 'Length'
characters into the target string. Split the copy out to only
copy 'Length' characters instead.
Reviewed by: imp, emaste
Reported by: GCC 12 -Wstringop-overread
Differential Revision: https://reviews.freebsd.org/D36826
The length passed to strncpy is the length of the source string, not
the destination buffer. This triggers a non-fatal warning in GCC 12.
Hoewver, the code is also odd. It is really just a memcpy of the
string without its nul terminator. For that use case, memcpy is
clearer.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D36824
Use TAILQ_FOREACH_SAFE to walk to list of children mnemonics to free
them instead of TAILQ_FOREACH.
Reviewed by: emaste
Reported by: GCC 12 -Wuse-after-free
Differential Revision: https://reviews.freebsd.org/D36821
GCC 12 thinks ct_visual_string can reuse a pointer after it has been
reallocated, but in this case the warning appears false.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36820
The _xrealloc() function prints pointer values for internal assertion
failures and in one case does so after it has freed the pointer.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36819
This could use -fmax-errors on GCC, but tweaking the error limit is
unusual in the tree anyway. Just remove it.
Reviewed by: erj, imp, emaste
Differential Revision: https://reviews.freebsd.org/D36808
glibc-based interface.
Unfortunately, the glibc maintainers, despite knowing the existence
of the FreeBSD qsort_r(3) interface in 2004 and refused to add the
same interface to glibc based on grounds of the lack of standardization
and portability concerns, has decided it was a good idea to introduce
their own qsort_r(3) interface in 2007 as a GNU extension with a
slightly different and incompatible interface.
With the adoption of their interface as POSIX standard, let's switch
to the same prototype, there is no need to remain incompatible.
C++ and C applications written for the historical FreeBSD interface
get source level compatibility when building in C++ mode, or when
building with a C compiler with C11 generics support, provided that
the caller passes a fifth parameter of qsort_r() that exactly matches
the historical FreeBSD comparator function pointer type and does not
redefine the historical qsort_r(3) prototype in their source code.
Symbol versioning is used to keep old binaries working.
MFC: never
Relnotes: yes
Reviewed by: cem, imp, hps, pauamma
Differential revision: https://reviews.freebsd.org/D17083
Various RPC functions used a bare pointer in function prototypes to
describe fixed-length buffer arguments but used a fixed-length array
in the function definition. The manual page for these functions
describes the parameters as being fixed-length buffers, so update
the prototypes to match the definitions.
Reviewed by: imp, emaste
Reported by: GCC -Warray-parameter
Differential Revision: https://reviews.freebsd.org/D36757
The telnetd codebase is unmaintained and has a number of quality
issues. Telnet has been largely supplanted by ssh. If needed, a port is
available (net/freebsd-telnetd), but a more maintained implementation
should be prefered.
While the telnet client suffers from the same issues, it is deemed
to be of lower risk and is required to connect to legacy devices, so
it remains.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D36620
reflect that it is not alphasort-specific.
Reported by: emaste
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36708
Improvements and changes to integrate bsddialog(1) with scripts in BASE.
Overview:
* New options. --and-widget, --keep-tite, --calendar.
* Change output format. Menus and --print-maxsize.
* Redefine sizing. Fixed rows, cols and menurows became at the most.
* Add DIAGNOSTICS. Error messages for bad arguments and options.
* Add keys. Space for --menu, fast keys for --msgbox and --yesno.
* Text. Change default text modification, add --cr-wrap.
See /usr/src/contrib/bsddialog/CHANGELOG '2022-09-24 Version 0.4'
for more detailed information.
Merge commit '9f24fda5a8e7ab8243e71473c7e2dc98b4877e64'
Improvements and changes to integrate bsddialog(1) with scripts in BASE.
Overview:
* New options. --and-widget, --keep-tite, --calendar.
* Change output format. Menus and --print-maxsize.
* Redefine sizing. Fixed rows, cols and menurows became at the most.
* Add DIAGNOSTICS. Error messages for bad arguments and options.
* Add keys. Space for --menu, fast keys for --msgbox and --yesno.
* Text. Change default text modification, add --cr-wrap.
See /usr/src/contrib/bsddialog/CHANGELOG '2022-09-24 Version 0.4'
for more detailed information.
Long ago, ktr_tid was ktr_buffer which pointed to the buffer following
the header and was used internally in the kernel. Use was removed in
efbbbf570d and it was repurposed as ktr_kid in c6854c347f. For
ABI reasons, it stayed an intptr_t rather than becoming an lwpid_t at
the time. Since it doesn't hold a pointer any more (unless you have
a ktrace.out from 2005), change the type to long which is alwasy the
same size on all supported architectures. Add a suggestion to change
the type to lwpid_t (__int32_t) on a future ABI break.
Remove most remaining references to ktr_buffer, retaing a comment in
kdump.c explaining why negative values are treated as 0. While here,
accept that pid_t and lwpid_t are of type int and simplify casts in
printf.
This changed was motivated by CheriBSD where intptr_t is 16-bytes
in the pure-capability ABI.
Reviewed by: kib, markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36599
The mentioned document "Name Server Operations Guide for BIND" is
outdated, so remove it from the SEE ALSO section of hosts.5
and resolver.{3,5}.
PR: 266360
Reported by: Graham Perrin <grahamperrin at FreeBSD dot org>
Reviewed by: karels
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36557
Ensure that we always pass sane limits for the high and low watermark
values.
This is especially important if users do something silly, like set the
state limit to 1. In that case we wound up calculating 0/0 as a limit,
which gets rejected by the kernel.
While here also shift the calculation to use uint64_t, so we don't end
up with overflows (and subsequently higher low than high values) with
very large state limits.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36497
Summary:
This knob can be used to make buildsystem prefer generic C implentations of
various functions, instead of machine-specific assembler ones.
Test Plan: `make buildworld` on amd64
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D36076
MFC after: 3 days
Use calloc().
Walk the class list we get from kernel, so we will not add something
the kernel does not know about.
Avoid picking headers from /usr/include.
Differential Revision: https://reviews.freebsd.org/D36401
- s/modfied/modified/
- s/minimun/minimum/
While here, fix some mandoc warnings:
- whitespace at end of input line
- unusual Xr punctuation
- missing comma before name
Obtained from: NetBSD
MFC after: 5 days
New features overview:
* Unicode. User interface handles multi-column characters. API can
handle char* like a multibyte character string. Internally wide
characters are used for keyboard input, to adapt word wrapping and
dynamic text auto-sizing for multi-column characters.
* Forms refactoring. Complete rewrite deleting libformw dependency.
* Theme. New utility options to save and load custom theme at run-time.
* TUI navigation. Added keys to navigate input components. Changed
default focus behavior of input dialogs to be LGPL-dialog-like; a new
option can set the previous whiptail-like behavior.
See /usr/src/contrib/bsddialog/CHANGELOG '2022-08-29 Version 0.3'
for more detailed information.
The divert(4) is not a protocol of IPv4. It is a socket to
intercept packets from ipfw(4) to userland and re-inject them
back. It can divert and re-inject IPv4 and IPv6 packets today,
but potentially it is not limited to these two protocols. The
IPPROTO_DIVERT does not belong to known IP protocols, it
doesn't even fit into u_char. I guess, the implementation of
divert(4) was done the way it is done basically because it was
easier to do it this way, back when protocols for sockets were
intertwined with IP protocols and domains were statically
compiled in.
Moving divert(4) out of inetsw accomplished two important things:
1) IPDIVERT is getting much closer to be not dependent on INET.
This will be finalized in following changes.
2) Now divert socket no longer aliases with raw IPv4 socket.
Domain/proto selection code won't need a hack for SOCK_RAW and
multiple entries in inetsw implementing different flavors of
raw socket can merge into one without requirement of raw IPv4
being the last member of dom_protosw.
Differential revision: https://reviews.freebsd.org/D36379
o Undocument sockets that are no longer supported, or never were.
o Add AF_HYPERV. Note: PF_HYPERV isn't defined, no typo here.
o Point at ip(4) and ip6(4) instead of unwelcoming "not described here".
Reviewed by: gbe, markj
Differential revision: https://reviews.freebsd.org/D36284
Add a strverscmp(3) function to libc, a GNU extension I implemented by
reading its glibc manual page. It orders strings following a much more
natural ordering (e.g. "ent1 < ent2 < ent10" as opposed to
"ent1 < ent10 < ent2" with strcmp(3)'s lexicographic ordering).
Also add versionsort(3) for use as scandir(3)'s compar argument.
Update manual page for scandir(3) and add one for strverscmp(3).
Reviewed by: pstef, gbe, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35807
The new helper scandir_dirp() takes DIR *, i.e. a pre-opened directory,
instead of the directory name.
Reviewed by: emaste, imp, kevans, markj, Aymeric Wibo <obiwac@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36301
Apparently the TARGET_ARCH macro is not supposed to be used outside of
the top-level Makefiles. Directly use MACHINE_ARCH instead.
Noticed by: imp, jrtc27
MFC after: 1 week
into ffs_sbsearch() to allow use by other parts of the system.
Historically only fsck_ffs(8), the UFS filesystem checker, had code
to track down and use alternate UFS superblocks. Since fsdb(8) used
much of the fsck_ffs(8) implementation it had some ability to track
down alternate superblocks.
This change extracts the code to track down alternate superblocks
from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in
sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found
in ffs_subr.c, these functions can be used directly by the kernel
subsystems. Additionally they are exported to the UFS library,
libufs(8) so that they can be used by user-level programs. The new
functions added to libufs(8) are sbfind(3) that is an alternative
to sbread(3) and sbsearch(3) that is an alternative to sbget(3).
See their manual pages for further details.
The utilities that have been changed to search for superblocks are
dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8)
tool found in tools/diag/prtblknos searches for superblocks.
The UFS specific mount code uses the superblock search interface
when mounting the root filesystem and when the administrator doing
a mount(8) command specifies the force flag (-f). The standalone UFS
boot code (found in stand/libsa/ufs.c) uses the superblock search
code in the hope of being able to get the system up and running so
that fsck_ffs(8) can be used to get the filesystem cleaned up.
The following utilities have not been changed to search for
superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8),
dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and
glabel(8). When these utilities fail, they do report the cause of
the failure. The one exception is the tasting code used to try and
figure what a given disk contains. The tasting code will remain
silent so as not to put out a slew of messages as it trying to taste
every new mass storage device that shows up.
Reviewed by: kib
Reviewed by: Warner Losh
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D36053
Sponsored by: The FreeBSD Foundation
The default ones are install them to /usr/libdata/pkgconfig, and we can't
use this path for compat libraries, so we use /usr/lib<suffix>/pkgconfigi here.
Test Plan: grep -rn libdir= ./usr/lib32/pkgconfig/*.pc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34939
Previously, it would only ignore failures due to csmapper conversion
failure. It may be the case that the input string contains invalid
sequences that also need to be ignored.
A good example of //IGNORE application is sanitizing user- or remotely-
specified strings that are expected to be UTF-8; perhaps as part of a
pipeline that will feed the result into a system less tested against or
tolerant of illegal UTF-8 sequences.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34345
A future commit will actually implement //IGNORE so that applications
using base iconv can, e.g., sanitize UTF-8 strings. To do this, the
iconv_std module needs to be able to determine the minimum width for any
given encoding so that it can skip that many bytes in the input buffer.
This is mainly an issue for UTF-16 and UTF-32.
This commit bumps shlib versions to 5 for libiconv modules to reflect
the ABI change. It also fixes OptionalObsoleteFiles to remove the
libiconv modules if WITHOUT_ICONV is in use.
re: _ENCODING_MB_CUR_MIN, note that this file (citrus_stdenc_template.h)
is included at the bottom of an encoding *implementation*, so the
implementation is free to #define it prior. UTF1632 is a good example,
as it redefines the minimum to be a property on the encodinginfo, and
the minimum is set to 2 or 4 bytes for UTF-16 and UTF-32 respectively.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34344
Make it vaguely aware of options in the sense that it now knows that it
can zap any trailing //. It now copies the entire string in realsrc and
realdst, then terminates them at the options.
__bsd___iconv_open can now stop trying to allocate memory just for this
purpose, and the new version is technically more correct. GNU libiconv
will ignore options on the `in` codeset and still do the right thing.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34343
The main change was v1.57 by djm@:
Randomise the rekey interval a little. Previously, the chacha20
instance would be rekeyed every 1.6MB. This makes it happen at a
random point somewhere in the 1-2MB range.
Reviewed by: csprng (markm, cem)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36088
Recover application ability to supply fabricated PID
embedded into ident that was lost when libc switched
to generation of RFC 5424 log messages, for example:
logger -t "ident[$$]" -p user.notice "test"
It is essential for long running scripts.
Also, this change unbreaks matching resulted entries
by ident in syslog.conf:
!ident
*.* /var/log/ident.log
Without the fix, the log (and matching) was broken:
Aug 1 07:36:58 hostname ident[123][86483]: test
Now it works as expected and worked before breakage:
Aug 1 07:39:40 hostname ident[123]: test
Differential: https://reviews.freebsd.org/D36005
MFC after: 2 weeks
- missing comma before name
- possible typo in section name: Sh CAVEAT instead of CAVEATS
- useless macro: Tn
- blank line in fill mode, using .sp
- no blank before trailing delimiter: Dv NULL?
MFC after: 3 days
- cannot parse date, using it verbatim: Dec 15, 1997"
- sections out of conventional order: Sh SEE ALSO
- possible typo in section name: Sh EXAMPLE instead of EXAMPLES
- AUTHORS section without An macro
MFC after: 3 days
These all have my copyright so can be removed. Some also have FreeBSD
Foundation copyright so drop from there as has been done for previous
files.
Sponsored by: The FreeBSD Foundation
This has already been done for most files that have the Foundation as
the only listed copyright holder. Do it now for files that list
multiple copyright holders, but have the Foundation copyright in its own
section.
Sponsored by: The FreeBSD Foundation
Damian McGuckin <damianm at esi dot com dot au> noted that the accuracy
claims in the code for cbrt(3) and cbrtl(3) were incorrect. Fix the
comments to more accurately describe the accuracies.
PR: 265603
MFC after: 3 days
Summary:
This allows installing packages that depend on kerberos libraries
without pulling in all the binaries. It also moves libgssapi to runtime
to allow installing kerbereos libraries without adding a dependancy on
the large utilities package. It makes sense to put libgssapi in runtime
rather than kerberos-lib since this is a plugin layer which is intended
to support any GSS-API mechanisms, not just kerberos.
A good example of a package which uses kerberos libraries without
needing the kerberos utilities is sshd. This uses the kerberos GSS-API
libraries to implement its GSSAPIAuthentication option.
MFC after: 2 weeks
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D36028
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation