a driver during kldunload. Specifically, recursively walk the tree of
subclasses of a given driver attachment's bus device class detaching all
instances of that driver for each class and its subclasses.
Reported by: bschmidt
Reviewed by: imp
MFC after: 1 week
White list sysarch calls allowed in capability mode; arguably, there
should be some link between the capability mode model and the privilege
model here. Sysarch is a morass similar to ioctl, in many senses.
Submitted by: anderson
Discussed with: benl, kris, pjd
Sponsored by: Google, Inc.
Obtained from: Capsicum Project
MFC after: 3 months
If a system call wasn't listed in capabilities.conf, return ECAPMODE at
syscall entry.
Reviewed by: anderson
Discussed with: benl, kris, pjd
Sponsored by: Google, Inc.
Obtained from: Capsicum Project
MFC after: 3 months
Add a new system call flag, SYF_CAPENABLED, which indicates that a
particular system call is available in capability mode.
Add a new configuration file, kern/capabilities.conf (similar files
may be introduced for other ABIs in the future), which enumerates
system calls that are available in capability mode. When a new
system call is added to syscalls.master, it will also need to be
added here (if needed). Teach sysent parts to use this file to set
values for SYF_CAPENABLED for the native ABI.
Reviewed by: anderson
Discussed with: benl, kris, pjd
Obtained from: Capsicum Project
MFC after: 3 months
compiled conditionally on options CAPABILITIES:
Add a new credential flag, CRED_FLAG_CAPMODE, which indicates that a
subject (typically a process) is in capability mode.
Add two new system calls, cap_enter(2) and cap_getmode(2), which allow
setting and querying (but never clearing) the flag.
Export the capability mode flag via process information sysctls.
Sponsored by: Google, Inc.
Reviewed by: anderson
Discussed with: benl, kris, pjd
Obtained from: Capsicum Project
MFC after: 3 months
constant to indicate that a system call (or perhaps an operation requested
via a system call) is not permitted for a capability mode process.
Submitted by: anderson
Sponsored by: Google, Inc.
Obtained from: Capsicum Project
MFC after: 1 week
the RTT that a flow will build up in buffers in
transit. It is a slight modification to RFC2581
but is more friendly i.e. less aggressive.
MFC after: 3 months
- Use vm_paddr_t for pa in pmap_steal_memory()
- Use uintmax_t and %jx to ensure that physical address are printed
correctly in cpu_startup() and pmap_bootstrap()
operation. Previously ownership was transferred to hardware before
setting address of new RX buffer such that it was possible for
hardware to use wrong RX buffer address.
While here keep compiler from re-ordering instructions by declaring
descriptor members volatile. Memory barriers would do the same job
but volatile is supposed to be cheaper than using memory barriers,
especially on MP systems.
Submitted by: marius
MFC after: 1 week
Few new things available from now on:
- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
transaction group.
- Possibility to import pool in read-only mode.
MFC after: 1 month
It used to choke on the notation "inb (%dx),%al" for "inb %dx,%al"; GNU
as accepts both forms. Which notation is more 'correct' is an open
question. :)
1) Add four new points that allow you to get more information
to cc algo's
2) Fix the case where user changes module on a existing TCB, in
such a case, the initialization module needs to be called on all nets.
3) Move htcp_cc structure to a union that other modules can use.
4) Add 5th point for get/set socket options for cc_module specific options
MFC after: 2 months
traced process by adding two new events which records value of process
sv_flags to the trace file at process creation/execing/exiting time.
MFC after: 1 Month.
1) do not take a lock around the single atomic operation.
2) do not lose the invariant of lock by dropping/acquiring
ktrace_mtx around free() or malloc().
MFC after: 1 Month.
mps.c: Hide the 'out of chain frames' warning behind MPS_INFO.
mps_sas.c: Hide the SIM queue freeze/unfreeze messages behind MPS_INFO.
mpsvar.h: Bump the number of chain frames from 1024 to 2048. From
testing, it looks like this makes it less likely that we'll
run out of chain frames, and it doesn't cost much memory
(32K).
MFC after: 3 days
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: silence on geom@ during 2 weeks
X-MFC after: to be determined in last commit with code from this project
PMC/SYSV/...).
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: arch@ (parts by rwatson, trasz, jhb)
X-MFC after: to be determined in last commit with code from this project
Now when one does 'make kernel ; make kernel' the second invocation
only does: `kernel.ko' is up to date.
rather than reproduce all the binary microcode files and relink the kernel.
[continuation of r212429]
As it was pointed out by Alan Cox, that no longer serves its purpose with
the modern UMA allocator compared to the old one used in 4.x days.
The removal of sysctl eliminates max_proc_mmap type overflow leading to
the broken mmap(2) seen with large amount of physical memory on arches
with factually unbound KVA space (such as amd64). It was found that
slightly less than 256GB of physmem was enough to trigger the overflow.
Reviewed by: alc, kib
Approved by: avg (mentor)
MFC after: 2 months
means of allowing vendor specific interface class for audio and MIDI devices.
- Add new quirks for this. The vendor and product list in OpenBSD's
dev/usb/umidi_quirks.c was used as reference.
MFC after: 14 days
Approved by: thompsa (mentor)
resource - the layout of cprd_port is identical but using cprd_mem
makes the code easier to understand.
PR: kern/118493
Submitted by: Weongyo Jeong <weongyo.jeong at gmail.com>
MFC after: 3 days
file where they are used. Declare the kern.threads sysctl node at the
same location. Since no external use for the variables exists, make them
static.
Discussed with: dchagin
MFC after: 1 week
different processes that happen to use the same user address in the
separate processes will now be treated as distinct futexes rather than the
same futex. We can now honor shared futexes properly by mapping them to a
PROCESS_SHARED umtx_key. Private futexes use THREAD_SHARED umtx_key
objects.
In conjunction with: dchagin
Reviewed by: kib
MFC after: 1 week
causing the size calculation to be truncated to the size of an int
(32-bits on all current architectures).
Submitted by: Anish akgupt3 of gmail
MFC after: 1 week
link flips during alias address insertion or dhclient operation.
While I'm here remove dc_reset() in DC_ISR_BUS_ERR case. Device is
fully reinitialized again in dc_init_locked().
file's last accessed, modified, and changed times:
TMPFS_NODE_ACCESSED and TMPFS_NODE_CHANGED should be set unconditionally
in tmpfs_remove() without regard to the number of hard links to the file.
Otherwise, after the last directory entry for a file has been removed, a
process that still has the file open could read stale values for the last
accessed and changed times with fstat(2).
Similarly, tmpfs_close() should update the time-related fields even if all
directory entries for a file have been removed. In this case, the effect
is that the time-related fields will have values that are later than
expected. They will correspond to the time at which fstat(2) is called.
In collaboration with: kib
MFC after: 1 week
In sys/boot/i386/boot2/boot2.c, change the type of the 'opts' variable
from uint16_t back to uint32_t. The actual option bitmasks (RB_* and
RBX_*) assume at least a 32 bit variable.
Submitted by: rdivacky
* Turn ath_tx_calc_ctsduration() into a function that
returns the ctsduration, or -1 for HT rates;
* add a printf() to ath_tx_calc_ctsduration() which will be
very loud if somehow that function is called with an MCS
rate;
* Add ath_tx_get_rtscts_rate() which returns the RTS/CTS
rate to use for the given data rate, incl. the short
preamble flag;
* Only call ath_tx_calc_ctsduration() for non-11n chipsets;
11n chipsets don't require the rtscts duration to be
calculated.
clean up parts of the *_recv_mgmt() functions.
- make sure appropriate counters are bumped and debug messages are printed
- order the unhandled subtypes by value and add a few missing ones
- fix some whitespace nits
- remove duplicate code in adhoc_recv_mgmt()
- remove a useless comment, probably left in while c&p
It's used to calculate:
* the initial per-rate entries for short/long preamble ACK durations;
* packet durations for TDMA slot decisions;
* RTS/CTS protection durations;
* updating the duration field in the 802.11 frame header
This way invalid durations will generate a warning, prompting for it to be
fixed.
The current code transmits management and multicast frames at MCS 0.
What it should do is check whether the negotiated basic set is zero (and
the MCS set is not) before making this decision.
For now, simply default to the lowest negotiated rate, rather than
MCS 0. This fixes the behaviour with at least the DLINK DIR-825, which
ACKs but silently ignores block-ack (BA) response frames.
vfs_export() fails. Restoring old options and flags after successful
VFS_MOUNT(9) call may cause the file system internal state to become
inconsistent with mount options and flags. Specifically the FFS super
block fs_ronly field and the MNT_RDONLY flag may get out of sync.
PR: kern/133614
Discussed on: freebsd-hackers
respectively and fix all bus_dma(9) issues seen when bounce buffers
are used.
o Setup frame handling had no bus_dmamap_sync(9) which prevented
driver from configuring RX filter. Add missing bus_dmamap_sync(9)
in both dc_setfilt_21143()/dc_setfilt_xircom() and dc_txeof().
o Use bus_addr_t for DMA segment instead of using u_int32_t.
o Introduce dc_dma_alloc()/dc_dma_free() functions to allocate/free
DMA'able memory.
o Create two DMA descriptor list for each TX/RX lists. This change
will minimize the size of bounce buffers that would be used in
each TX/RX path. Previously driver had to copy both TX/RX lists
when bounce buffer is active.
o 21143 data sheet says descriptor list requires 4 bytes alignment.
Remove PAGE_SIZE alignment restriction and use
sizeof(struct dc_dec).
o Setup frame requires 4 bytes alignment. Remove PAGE_SIZE
alignment restriction and use sizeof(struct dc_dec).
o Add missing DMA map unload for both setup frame and TX/RX
descriptor list.
o Overhaul RX handling logic such that make driver always allocate
new RX buffer with dc_newbuf(). Previously driver allowed to
copy received frame with m_devget(9) after passing the
descriptor ownership to controller. This can lead to passing
wrong frame to upper stack.
o Introduce dc_discard_rxbuf() which will discard received frame
and reuse loaded DMA map and RX mbuf.
o Correct several wrong bus_dmamap_sync(9) usage in dc_rxeof and
dc_txeof. The TX/RX descriptor lists are updated by both driver
and HW so READ/WRITE semantics should be used.
o If driver failed to allocate new RX buffer, update if_iqdrops
counter instead of if_ierrors since driver received the frame
without errors.
o Make sure to unload loaded setup frame DMA map in dc_txeof and
clear the mark of setup frame of the TX descriptor in dc_txeof().
o Add check for possible TX descriptor overruns in dc_encap() and
move check for free buffer to caller, dc_start_locked().
o Swap the loaded DMA map and the last DMA map for multi-segmented
frames. Since dc_txeof() assumes the last descriptor of the
frame has the DMA map, driver should swap the first and the last
DMA map in dc_encap(). Previously driver tried to unload
not-yet-loaded DMA map such that the loaded DMA map was not
unloaded at all for multi-segmented frames.
o Rewrite DC_RXDESC/DC_TXDESC macro to simpler one.
o Remove definition of ETHER_ALIGN, it's already defined in
ethernet.h.
With this changes, dc(4) works with bounce buffers and it shall
also fix issues which might have shown in PAE environments.
Tested by: marius
Previously dc(4) always checked whether there is pending interrupts
and this consumed a lot of CPU cycles in interrupt handler. Limit
the number of processing for TX/RX frames to 16. Also allow sending
frames in the loop not to starve TX under high RX load.
Reading DC_ISR register should be protected with driver lock,
otherwise interrupt handler could be run(e.g. link state change)
before the completion of dc_init_locked().
While I'm here remove unneeded code.
as well as controller has enough free TX descriptors.
Remove check for number of queued frames before attempting to
transmit. I guess it was added to allow draining queued frames
even if there is no link. I'm under the impression this type of
check should be done in upper layer. No other drivers in tree do
that.
ownership to controller before completion of access to the
descriptor. Driver is faking up status word so it should not give
ownership to controller until it completes RX processing.
