- The MD functions critical_enter/exit are renamed to start with a cpu_
prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
count and a per-thread critical section saved state set when entering
a critical section while at nesting level 0 and restored when exiting
to nesting level 0. This moves the saved state out of spin mutexes so
that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
cpu_critical_enter/exit. MI code such as device drivers and spin
mutexes use the MI wrappers. Note that since the MI wrappers store
the state in the current thread, they do not have any return values or
arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
assigned to curthread->td_savecrit during fork_exit().
Tested on: i386, alpha
- The MI portions of struct globaldata have been consolidated into a MI
struct pcpu. The MD per-CPU data are specified via a macro defined in
machine/pcpu.h. A macro was chosen over a struct mdpcpu so that the
interface would be cleaner (PCPU_GET(my_md_field) vs.
PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead. In a UP kernel,
this data was stored as global variables which is where the original name
came from. In an SMP world this data is per-CPU and ideally private to each
CPU outside of the context of debuggers. This also included combining
machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
fields.
- The globaldata_register() function was renamed to pcpu_init() and now
init's MI fields of a struct pcpu in addition to registering it with
the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
internal array and list.
Tested on: alpha, i386
Reviewed by: peter, jake
o Hide nonstandard functions and types in <netinet/in.h> when
_POSIX_SOURCE is defined.
o Add some missing types (required by POSIX.1-200x) to <netinet/in.h>.
o Restore vendor ID from Rev 1.1 in <netinet/in.h> and make use of new
__FBSDID() macro.
o Fix some miscellaneous issues in <arpa/inet.h>.
o Correct final argument for the inet_ntop() function (POSIX.1-200x).
o Get rid of the namespace pollution from <sys/types.h> in
<arpa/inet.h>.
Reviewed by: fenner
Partially submitted by: bde
in asm files.
2. Temporarily cause subnormal operands in floating point operations
to be treated as zeros so that comlpetion of the operation does not
need to be emulated.
3. Catch fp_exception_other and correctly skip over the unfinished
instruction, but basically ignore them. Emulating the instruction
is not yet supported.
4. Zero td_retval[1] as well in syscall().
Submitted by: tmm (2, 3)
2. Add a TF_DONE macro, which fiddles a trapframe to make the retry on
return from traps act like a done (advance past the trapping
instruction instead of re-executing).
3. Flush the windows before entering the debugger, since it is no
longer done in the breakpoint trap vector.
4. Print a warning if trace <pid> is attempted, it is not yet implemented.
5. Print traps better and decode system calls in traces.
Submitted by: rwatson (4)
to determine if a process is using floating point. in order to avoid
sign extending a 13 bit immediate.
2. We don't need to context switch cwp anymore, it is better to just
fiddle the save tstate on return from traps. See exception.s 1.10
and 1.12.
3. Completely remove pcb_cwp.
4. Implement vmapbuf, vunmapbuf and vm_fault_quick. Completely remove
TODOs from vm_machdep.c (yay!).
Submitted by: tmm (1, 3, 4)
Obtained from: existing archs (4)
space from kernel space and from an alternate address space to kernel
space.
2. Remove the unused and unprototyped physcopy() and physzero() and replace
with the more versatile ascopy() and aszero(), inspired by the above.
These can be used to copy and zero physical pages of memory without mapping
them into kernel space first.
3. Use magic numbers for the offsets in the jmpbuf structure like other
platforms.
4. Use SET.
Submitted by: tmm (1, 4)
in the window trap vectors were mixed up. All this did is cause unnecesary
traps and look wierd in traces. Superfluous traps happen a lot in normal
operation, so we are rather good at recovering from them.
2. Store the arguments for a ktr trace in the right place.
3. Use a generic trap vector for breakpoints. It should not be special.
4. Save the frame pointer in the trap frame for kernel traps if DDB is compiled
in, otherwsie we don't save the out registers for kernel traps and stack
traces can't go through nested traps.
5. Apply the same fix to the return from kernel mode trap code as for user
mode traps. Ensure that the window we're returning to is the same one
that we restore to by fiddling the cwp in the saved tstate. This requires
that we transfer the values loaded from the trap frame into alternate
globals before restore-ing, but doing so is not very expensive and not
worth worrying about. Not changing the saved cwp can result in the register
values magically changing on return from traps if we happen to have slept
and the windows don't work out exactly the same. Fix the trace just before
the retry to account for different register usage.
6. Use a SET macro for loading address constants rather than a variation of
set and setx. set only works for 32 bit constants, while setx works for
64 bit constants as well, but produces bloated code when unnecessary.
Gas always generates the canonical 2 register, 6 instruction form, even
when it could be optimized; set uses 1 register and 2 instructions. At
the moment we assume that the kernel binary is below 4GB so set is
always sufficient, but the macro allows it to be configured. Note that
this has nothing to do with 32 vs. 64 bit address space, it only applies
to addresses of symbols which are known at compile/link time.
Submitted by: tmm (6)
this case, the firmware trap table needs to be restored). Make use of
it in cpu_halt() and cpu_reset(), and make cpu_reset() reboot the kernel
that was used previously insead of behaving like cpu_halt().
Add a shutdown_final event handler that turns the power off if requested.
unaligned accesses, and instr.h, which contrains definitions for the
sparc64 instruction set (partly from NetBSD).
Make use of some definitions from instr.h in db_disasm.c.
o Make <stdint.h> a symbolic link to <sys/stdint.h>.
o Move most of <sys/inttypes.h> into <sys/stdint.h>, as per C99.
o Remove <sys/inttypes.h>.
o Adjust includes in sys/types.h and boot/efi/include/ia64/efibind.h
to reflect new location of integer types in <sys/stdint.h>.
o Remove previously symbolicly linked <inttypes.h>, instead create a
new file.
o Add MD headers <machine/_inttypes.h> from NetBSD.
o Include <sys/stdint.h> in <inttypes.h>, as required by C99; and
include <machine/_inttypes.h> in <inttypes.h>, to fill in the
remaining requirements for <inttypes.h>.
o Add additional integer types in <machine/ansi.h> and
<machine/limits.h> which are included via <sys/stdint.h>.
Partially obtain from: NetBSD
Tested on: alpha, i386
Discussed on: freebsd-standards@bostonradio.org
Reviewed by: bde, fenner, obrien, wollman
userland. The per thread ucred reference is immutable and thus needs no
locks to be read. However, until all the proc locking associated with
writes to p_ucred are completed, it is still not safe to use the per-thread
reference.
Tested on: x86 (SMP), alpha, sparc64
{set,fill}_{,fp,db}regs() fixup:
- Add dummy {set,fill}_dbregs() on architectures that don't have them.
- KSEfy the powerpc versions (struct proc -> struct thread).
- Some architectures had the prototypes in md_var.h, some in reg.h, and
some in both; for consistency, move them to reg.h on all platforms.
These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.
Run-tested on i386, build-tested on Alpha, untested on other platforms.
was used. This resulted in bogus bad window traps (invalid wstate).
Add a trace to sfsr traps (alignment among other things).
Use KTR_TRAP instead of KTR_CT1.
Use the right registers when storing the values of various
mmu registers into the trap frame. This fixes a bug where sometimes
the context number reported by a fault would be garbage. Sometimes
it would be zero for faults on user address space so the kernel would
wrongly think that it was a fault on kernel address space and fail.
Use the preloaded registers in the vectored interrupt trap instead
of reading pointers from memory. Remove traces due to register
pressure and excess verbosity. We can probably still sneak in one
trace. Remove some debug code.
Go back to using the tsb register during kernel page table lookups.
This is the best way to not have to have the address of the kernel tsb be
a compile time constant. We lie and say we have 1 page tsb when really
its much larger. This way the hardware provides bits 13-22 of the
virtual address (the lower 9 bits of the virtual page number) in the
form of the address of the tte corresponding to the fault address in
the (1 page) kernel tsb. With some clever arithmetic we can then get
bits 22 and up from the tte tag and add them to the tte address in
order to index massive tsbs (basically unlimited).
Add traps for physical address hardware watchpoints.
Don't try to pass the window state from the trap table entry point
all the way down to the common trap code. Its too easy to clobber
and reading it again doesn't cost much.
Fixup some traces.
Fiddle the cwp bits on return from the kernel to user mode so that
the window we are returning to is always the same as the one we
restore to in the trap code. Strictly speaking this is not necessary,
it only affects return from fork and exec, but setting up the windows
right would require hard coding the right cwp values in cpu_fork and
setregs, basically hard coding the number of frames between syscall and
tl0_ret. The result of getting it wrong is usually a spill to an invalid
stack pointer; either 0 or pointing into kernel space. This should also
alleviate the need to context switch the cwp.
Transfer the trap state from locals to alternate globals in the trap
return code so that we can do a restore and rotate the windows before
reloading the trap registers. If the restore fails we'll trap back
into the kernel, so there's no point in loading the trap registers
before hand. Its is crucial that the window trap recovery code not
clobber the alternate globals.
