protocol entry points using functions named proto_getsockaddr and
proto_getpeeraddr rather than proto_setsockaddr and proto_setpeeraddr.
While it's true that sockaddrs are allocated and set, the net effect is
to retrieve (get) the socket address or peer address from a socket, not
set it, so align names to that intent.
directly to a merged model where only one callout, the next to fire,
is registered.
Instead of callout_reset(9) and callout_stop(9) the new function
tcp_timer_activate() is used which then internally manages the callout.
The single new callout is a mutex callout on inpcb simplifying the
locking a bit.
tcp_timer() is the called function which handles all race conditions
in one place and then dispatches the individual timer functions.
Reviewed by: rwatson (earlier version)
potential issues where the peer does not close, potentially leaving
thousands of connections in FIN_WAIT_2. This is controlled by a new sysctl
fast_finwait2_recycle, which is disabled by default.
Reviewed by: gnn, silby.
socket option TCP_INFO.
Note that the units used in the original Linux API are in microseconds,
so use a 64-bit mantissa to convert FreeBSD's internal measurements
from struct tcpcb from ticks.
Normally the socket buffers are static (either derived from global
defaults or set with setsockopt) and do not adapt to real network
conditions. Two things happen: a) your socket buffers are too small
and you can't reach the full potential of the network between both
hosts; b) your socket buffers are too big and you waste a lot of
kernel memory for data just sitting around.
With automatic TCP send and receive socket buffers we can start with a
small buffer and quickly grow it in parallel with the TCP congestion
window to match real network conditions.
FreeBSD has a default 32K send socket buffer. This supports a maximal
transfer rate of only slightly more than 2Mbit/s on a 100ms RTT
trans-continental link. Or at 200ms just above 1Mbit/s. With TCP send
buffer auto scaling and the default values below it supports 20Mbit/s
at 100ms and 10Mbit/s at 200ms. That's an improvement of factor 10, or
1000%. For the receive side it looks slightly better with a default of
64K buffer size.
New sysctls are:
net.inet.tcp.sendbuf_auto=1 (enabled)
net.inet.tcp.sendbuf_inc=8192 (8K, step size)
net.inet.tcp.sendbuf_max=262144 (256K, growth limit)
net.inet.tcp.recvbuf_auto=1 (enabled)
net.inet.tcp.recvbuf_inc=16384 (16K, step size)
net.inet.tcp.recvbuf_max=262144 (256K, growth limit)
Tested by: many (on HEAD and RELENG_6)
Approved by: re
MFC after: 1 month
upper-bounding it to the size of the initial socket buffer lower-bound it
to the smallest MSS we accept. Ideally we'd use the actual MSS information
here but it is not available yet.
For socket buffer auto sizing to be effective we need room to grow the
receive window. The window scale shift is determined at connection setup
and can't be changed afterwards. The previous, original, method effectively
just did a power of two roundup of the socket buffer size at connection
setup severely limiting the headroom for larger socket buffers.
Tested by: many (as part of the socket buffer auto sizing patch)
MFC after: 1 month
marked INP_DROPPED or INP_TIMEWAIT:
o return ECONNRESET instead of EINVAL for close, disconnect, shutdown,
rcvd, rcvoob, and send operations
o return ECONNABORTED instead of EINVAL for accept
These changes should reduce confusion in applications since EINVAL is
normally interpreted to mean an invalid file descriptor. This change
does not conflict with POSIX or other standards I checked. The return
of EINVAL has always been possible but rare; it's become more common
with recent changes to the socket/inpcb handling and with finer-grained
locking and preemption.
Note: there are other instances of EINVAL for this state that were
left unchanged; they should be reviewed.
Reviewed by: rwatson, andre, ru
MFC after: 1 month
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.
This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.
Reviewed by: gnn
( and where appropriate the destruction) of the pcb mutex to the init/finit
functions of the pcb zones.
This allows locking of the pcb entries and race condition free comparison
of the generation count.
Rearrange locking a bit to avoid extra locking operation to update the generation
count in in_pcballoc(). (in_pcballoc now returns the pcb locked)
I am planning to convert pcb list handling from a type safe to a reference count
model soon. ( As this allows really freeing the PCBs)
Reviewed by: rwatson@, mohans@
MFC after: 1 week
common pcb tear-down logic into tcp_detach(), which is called from
either. Invoke tcp_drop() from the tcp_usr_abort() path rather than
tcp_disconnect(), as we want to drop it immediately not perform a
FIN sequence. This is one reason why some people were experiencing
panics in sodealloc(), as the netisr and aborting thread were
simultaneously trying to tear down the socket. This bug could often
be reproduced using repeated runs of the listenclose regression test.
MFC after: 3 months
PR: 96090
Reported by: Peter Kostouros <kpeter at melbpc dot org dot au>, kris
Tested by: Peter Kostouros <kpeter at melbpc dot org dot au>, kris
immediately rather than jumping to the normal output handling, which
assumes we've pulled out the inpcb, which hasn't happened at this
point (and isn't necessary).
Return ECONNABORTED instead of EINVAL when the inpcb has entered
INP_TIMEWAIT or INP_DROPPED, as this is the documented error value.
This may correct the panic seen by Ganbold.
MFC after: 1 month
Reported by: Ganbold <ganbold at micom dot mng dot net>
disconnect for fully connected sockets was dropped, meaning that if
the socket was closed while the connection was alive, it would be
leaked. Structure tcp_usr_detach() so that there are two clear
parts: initiating disconnect, and reclaiming state, and reintroduce
the tcp_disconnect() call in the first part.
MFC after: 3 months
socket can have a tcp connection that has entered time wait
attached to it, in the event that shutdown() is called on the
socket and the FINs properly exchange before close(). In this
case we don't detach or free the inpcb, just leave the tcptw
detached and freed, but we must release the inpcb lock (which we
didn't previously).
MFC after: 3 months
pru_abort(), pru_detach(), and in_pcbdetach():
- Universally support and enforce the invariant that so_pcb is
never NULL, converting dozens of unnecessary NULL checks into
assertions, and eliminating dozens of unnecessary error handling
cases in protocol code.
- In some cases, eliminate unnecessary pcbinfo locking, as it is no
longer required to ensure so_pcb != NULL. For example, the receive
code no longer requires the pcbinfo lock, and the send code only
requires it if building a new connection on an otherwise unconnected
socket triggered via sendto() with an address. This should
significnatly reduce tcbinfo lock contention in the receive and send
cases.
- In order to support the invariant that so_pcb != NULL, it is now
necessary for the TCP code to not discard the tcpcb any time a
connection is dropped, but instead leave the tcpcb until the socket
is shutdown. This case is handled by setting INP_DROPPED, to
substitute for using a NULL so_pcb to indicate that the connection
has been dropped. This requires the inpcb lock, but not the pcbinfo
lock.
- Unlike all other protocols in the tree, TCP may need to retain access
to the socket after the file descriptor has been closed. Set
SS_PROTOREF in tcp_detach() in order to prevent the socket from being
freed, and add a flag, INP_SOCKREF, so that the TCP code knows whether
or not it needs to free the socket when the connection finally does
close. The typical case where this occurs is if close() is called on
a TCP socket before all sent data in the send socket buffer has been
transmitted or acknowledged. If INP_SOCKREF is found when the
connection is dropped, we release the inpcb, tcpcb, and socket instead
of flagging INP_DROPPED.
- Abort and detach protocol switch methods no longer return failures,
nor attempt to free sockets, as the socket layer does this.
- Annotate the existence of a long-standing race in the TCP timer code,
in which timers are stopped but not drained when the socket is freed,
as waiting for drain may lead to deadlocks, or have to occur in a
context where waiting is not permitted. This race has been handled
by testing to see if the tcpcb pointer in the inpcb is NULL (and vice
versa), which is not normally permitted, but may be true of a inpcb
and tcpcb have been freed. Add a counter to test how often this race
has actually occurred, and a large comment for each instance where
we compare potentially freed memory with NULL. This will have to be
fixed in the near future, but requires is to further address how to
handle the timer shutdown shutdown issue.
- Several TCP calls no longer potentially free the passed inpcb/tcpcb,
so no longer need to return a pointer to indicate whether the argument
passed in is still valid.
- Un-macroize debugging and locking setup for various protocol switch
methods for TCP, as it lead to more obscurity, and as locking becomes
more customized to the methods, offers less benefit.
- Assert copyright on tcp_usrreq.c due to significant modifications that
have been made as part of this work.
These changes significantly modify the memory management and connection
logic of our TCP implementation, and are (as such) High Risk Changes,
and likely to contain serious bugs. Please report problems to the
current@ mailing list ASAP, ideally with simple test cases, and
optionally, packet traces.
MFC after: 3 months
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.
soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.
Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.
In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.
netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.
MFC after: 3 months
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.
This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.
MFC after: 3 months
following the protocol pru_listen() call to solisten_proto(), so
that it occurs under the socket lock acquisition that also sets
SO_ACCEPTCONN. This requires passing the new backlog parameter
to the protocol, which also allows the protocol to be aware of
changes in queue limit should it wish to do something about the
new queue limit. This continues a move towards the socket layer
acting as a library for the protocol.
Bump __FreeBSD_version due to a change in the in-kernel protocol
interface. This change has been tested with IPv4 and UNIX domain
sockets, but not other protocols.
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME
needed only for implicit connect cases. Under load, especially on SMP,
this can greatly reduce contention on the tcbinfo lock.
NB: Ambiguities about the state of so_pcb need to be resolved so that
all use of the tcbinfo lock in non-implicit connection cases can be
eliminated.
Submited by: Kazuaki Oda <kaakun at highway dot ne dot jp>
a socket from a regular socket to a listening socket able to accept new
connections. As part of this state transition, solisten() calls into the
protocol to update protocol-layer state. There were several bugs in this
implementation that could result in a race wherein a TCP SYN received
in the interval between the protocol state transition and the shortly
following socket layer transition would result in a panic in the TCP code,
as the socket would be in the TCPS_LISTEN state, but the socket would not
have the SO_ACCEPTCONN flag set.
This change does the following:
- Pushes the socket state transition from the socket layer solisten() to
to socket "library" routines called from the protocol. This permits
the socket routines to be called while holding the protocol mutexes,
preventing a race exposing the incomplete socket state transition to TCP
after the TCP state transition has completed. The check for a socket
layer state transition is performed by solisten_proto_check(), and the
actual transition is performed by solisten_proto().
- Holds the socket lock for the duration of the socket state test and set,
and over the protocol layer state transition, which is now possible as
the socket lock is acquired by the protocol layer, rather than vice
versa. This prevents additional state related races in the socket
layer.
This permits the dual transition of socket layer and protocol layer state
to occur while holding locks for both layers, making the two changes
atomic with respect to one another. Similar changes are likely require
elsewhere in the socket/protocol code.
Reported by: Peter Holm <peter@holm.cc>
Review and fixes from: emax, Antoine Brodin <antoine.brodin@laposte.net>
Philosophical head nod: gnn
o Use SYSCTL_IN() macro instead of direct call of copyin(9).
Submitted by: ume
o Move sysctl_drop() implementation to sys/netinet/tcp_subr.c where
most of tcp sysctls live.
o There are net.inet[6].tcp[6].getcred sysctls already, no needs in
a separate struct tcp_ident_mapping.
Suggested by: ume
utility:
The tcpdrop command drops the TCP connection specified by the
local address laddr, port lport and the foreign address faddr,
port fport.
Obtained from: OpenBSD
Reviewed by: rwatson (locking), ru (man page), -current
MFC after: 1 month
This socket option allows processes query a TCP socket for some low
level transmission details, such as the current send, bandwidth, and
congestion windows. Linux provides a 'struct tcpinfo' structure
containing various variables, rather than separate socket options;
this makes the API somewhat fragile as it makes it dificult to add
new entries of interest as requirements and implementation evolve.
As such, I've included a large pad at the end of the structure.
Right now, relatively few of the Linux API fields are filled in, and
some contain no logical equivilent on FreeBSD. I've include __'d
entries in the structure to make it easier to figure ou what is and
isn't omitted. This API/ABI should be considered unstable for the
time being.
A complete rationale and discussion is given in this message
and the resulting discussion:
http://docs.freebsd.org/cgi/mid.cgi?4177C8AD.6060706
Note that this commit removes only the functional part of T/TCP
from the tcp_* related functions in the kernel. Other features
introduced with RFC1644 are left intact (socket layer changes,
sendmsg(2) on connection oriented protocols) and are meant to
be reused by a simpler and less intrusive reimplemention of the
previous T/TCP functionality.
Discussed on: -arch
