Debug data files are now built by default with 'make buildworld' and
installed with 'make installworld'. This facilitates debugging but
requires more disk space both during the build and for the installed
world. Debug files may be disabled by setting WITHOUT_DEBUG_FILES=yes
in src.conf(5).
Reviewed by: bdrewery, eadler, vangyzen
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4018
Say it with me, "I will not chain commands with && in Makefiles"
This was originally fixed and explained quite well by bde@ in r36074. The
initial bmake integration caused 'set -e' to stop being used which lead to
r252419. Later 'set -e' expectations were fixed with bmake in r254980.
Because of the && here, errors would be ignored when building in parallel and
a dependency failed. Such as bootstrap-tools since it builds everything in
parallel. If any tool failed in obj/depend/all, it would just ignore the error
and continue to build. This later would result in cascaded errors that only
confused the real issue. This could also cause commands after the failed
command to still execute, leading to more confusion.
This should be fine if the command is in a sub-shell such as: (cmd1 && cmd2)
This reverts r252419.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
inconsistency when installing new locales and may also result in failures
when reinstalling after having run make delete-old (due to previous
inconsistencies) for now recommand removing all locales until install(1) is
fixed
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
target. This is the feeder for mergemaster / etcupdate. This change
makes installworld/mergemaster/etcupdate behave the same regardless of
whether SENDMAIL_MC or SENDMAIL_CF is used.
If you use a custom SENDMAIL_MC/CF in make.conf and excluded it from
mergemaster.rc/etcupdate.conf to work around the conflicts, you may wish
to revert that or change it from 'ignore' to 'always install'.
If you do not use a custom SENDMAIL_MC/CF, there should be no change in
behavior.
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.
Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.
Reviewed by: gnn, eri
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3466
if desired.
Retire randomdev_none.c and introduce random_infra.c for resident
infrastructure. Completely stub out random(4) calls in the "without
DEV_RANDOM" case.
Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten
algorithm. Add a skeleton "other" algorithm framework for folks
to add their own processing code. NIST, anyone?
Retire the RANDOM_DUMMY option.
Build modules for Yarrow, Fortuna and "other".
Use atomics for the live entropy rate-tracking.
Convert ints to bools for the 'seeded' logic.
Move _write() function from the algorithm-specific areas to randomdev.c
Get rid of reseed() function - it is unused.
Tidy up the opt_*.h includes.
Update documentation for random(4) modules.
Fix test program (reviewers, please leave this).
Differential Revision: https://reviews.freebsd.org/D3354
Reviewed by: wblock,delphij,jmg,bjk
Approved by: so (/dev/random blanket)
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files
PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176
As ZFS requires a more kernel stack pages than is the default on some
architectures e.g. i386, warn if KSTACK_PAGES is less than
ZFS_MIN_KSTACK_PAGES (which is 4 at the time of writing).
MFC after: 3 days
Sponsored by: Multiplay
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
really need it can find it in the devel/fmake port or pkg install fmake.
Note: This commit is orthogonal to the question 'can we fmake buildworld'.
Differential Revision: https://reviews.freebsd.org/D2840
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).
Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update
GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3
On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is
Differential Revision: https://reviews.freebsd.org/D2146
Reviewed by: rpaulo, ian, Michal Meloun, Svatopluk Kraus
executables. The goal here, not yet accomplished, is to let the e500 kernel
run under QEMU by setting KERNBASE to something that fits in low memory and
then having the kernel relocate itself at runtime.
it processes its own ELF relocations and can be loaded and run in place at
any physical/virtual address.
NB: This requires an updated loader to boot!
Relnotes: yes
These tools are now from the ELF Tool Chain project:
* addr2line
* elfcopy (strip)
* nm
* size
* strings
The binutils versions are available by setting in src.conf:
WITHOUT_ELFTOOLCHAIN_TOOLS=yes
Thanks to antoine@ for multiple exp-runs and diagnosing many of the
failures.
PR: 195561 (ports exp-run)
Sponsored by: The FreeBSD Foundation
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
vt(4) is a new console driver which brings features such as:
o Support for Unicode and double-width characters
o Integration with the KMS kernel video drivers
o Support for UEFI
You may need to update your console settings in /etc/rc.conf, most
probably the keymap. During boot, /etc/rc.d/syscons will indicate what
you need to do.
vt(4) still has issues and lacks some features compared to syscons(4).
See the wiki for up-to-date information:
https://wiki.freebsd.org/Newcons
If you want to keep using syscons(4), you can do so by adding the
following line to /boot/loader.conf:
kern.vty=sc
Differential Revision: https://reviews.freebsd.org/D1005
Discussed with: emaste@, nwhitehorn@, ray@
Relnotes: yes
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
framebuffer drivers. This lets ofwfb work with xf86-video-scfb and makes
the driver much more generic and less PCI-centric. This changes some
user-visible behavior and will require updates to the xorg-server port
on PowerPC when using ATI graphics cards.
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
UPDATING. This is the first step towards the removal of ia64 from
head. A buildworld for ia64 will now yield:
% make buildworld
make[1]: "/usr/src/Makefile.inc1" line 151: Unknown target ia64:ia64.
While here, trim the ia64-specific additions from ObsoleteFiles.inc
Discussed at: BSDcan
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
Suggested by: imp, wblock
MFC after: 1 week
workaround. Magic ".../share/mk" (search directories up to /)
does not work for f.e. /usr/src/gnu/lib/libgcc because the path
inside is starting from /usr/obj hierarchy and ends up in
/usr/share/mk, not in the /usr/src/share/mk where src.opts.mk is.
IMHO proper fixing of incremental build is needed urgently.
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
The libatf-* major version numbers in FreeBSD were one version ahead of
upstream because, when atf was first imported into FreeBSD, the upstream
numbers were not respected. This is just confusing and bound to cause
problems down the road.
Fix this by taking advantage of the fact that libatf-* are now private
and that atf is not yet built by default. However, and unfortunately, a
clean build is needed for tests to continue working once "make
delete-old-libs" has been run; hence the note in UPDATING.
been installed in the first place, and it must be removed ASAP or
weird build errors may start happening in the future if this file is
ever taken from the installed system. Add note to UPDATING.
versions. With its movement to src.opts.mk, bsd.prog.mk was testing
COMPILER_TYPE without including the bsd.compiler.mk anymore. In the
source tree, this caused no problems, for reasons that aren't clear,
but does cause problems outside of the source tree. Allow
bsd.compiler.mk to be included multiple times safely, and always
include bsd.compiler.mk at the top of bsd.prog.mk. Resist the urge to
put it in bsd.init.mk, since that would reintroduce the implicit
include.
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
Reported by: jkim
all FreeBSD versions, not just 10.x and earlier. Apparently too many
people seem to have trouble with post-1993 formats.
Also remove the related notes about messing with kernel configuration
files from UPDATING, which are now superfluous.
Requested by: many
MFC after: 3 days
CLOCAL and HUPCL control flags. There are legit reasons for allowing
those to be changed. When /etc/ttys has the "3wire" type (without a
baudrate) for the serial port that is the low-level console, then
this change has no effect.
Obtained from: Juniper Networks, Inc.
add it in kern.mk, but only if we're using clang. While this
option is supported by both clang and gcc, in the future there
may be changes to clang which change the defaults that require
a tweak to build our kernel such that other tools in our tree
will work. Set a good example by forcing -gdwarf-2 only for
clang builds, and only if the user hasn't specified another
dwarf level already. Update UPDATING to reflect the changed
state of affairs. This also keeps us from having to update
all the ARM kernels to add this, and also keeps us from
in the future having to update all the MIPS kernels and is
one less place the user will have to know to do something
special for clang and one less thing developers will need
to do when moving an architecture to clang.
Reviewed by: ian@
MFC after: 1 week
new command line options -W, to enable it when needed.
On my tests this change by almost ten times improves rpcbind performance.
No objections: many, net@
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
When generating a Kyuafile in the KYUAFILE=auto case, use a filename
that is unlikely to clash with the filename used by explicitly-provided
Kyuafiles.
This allows a Makefile to set KYUAFILE=yes and provide a Kyuafile in
the same directory when such Makefile was previously relying on
KYUAFILE=auto.
Fixes issues with new Kyuafiles not being picked up in NO_CLEAN builds
(although manual intervention is required once, unfortunately, as
described in UPDATING).
Reviewed by: sjg
MFC after: 1 week
mentioned in UPDATING, you can even do it as an as-needed operation after
doing a buildworld/installworld. You can set WITH_LIB32=yes in make.conf
or src.conf.
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
- Update FreeBSD version in:
- UPDATING
- sys/conf/newvers.sh
- Add 11.0 FreeBSD version for manual pages
- Bump __FreeBSD_version to 1100000
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
command line options. The "jail_<jname>_*" rc.conf(5) variables for
per-jail configuration are automatically converted to
/var/run/jail.<jname>.conf before the jail(8) utility is invoked.
This is transparently backward compatible.
- Fix a minor bug in jail(8) which prevented it from returning false
when jail -r failed.
Approved by: re (glebius)
r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
Vendor update to [c]dialog-1.2-20130925 has fixed known problems.
Vendor update SVN revisions: 255917-255917, 255852, and 255958.
Reviewed by: gjb
Approved by: re (gjb)
process dies, the process descriptor will be closed and pdfork(2)ed child
will be killed, which is not the case when regular fork(2) is used.
The PROCDESC option is now part of the GENERIC kernel configuration, so we
can start depending on it.
Add UPDATING entry to inform that this option is now required and log
detailed instruction to syslog if pdfork(2) is not available:
The pdfork(2) system call is not available; recompile the kernel with options PROCDESC
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
Do this by forcing inclusion of
sys/cddl/compat/opensolaris/sys/debug_compat.h
via -include option into all source files from OpenSolaris.
Note that this -include option must always be after -include opt_global.h.
Additionally, remove forced definition of DEBUG for some modules and fix
their build without DEBUG.
Also, meaning of DEBUG was overloaded to enable WITNESS support for some
OpenSolaris (primarily ZFS) locks. Now this overloading is removed and
that use of DEBUG is replaced with a new option OPENSOLARIS_WITNESS.
MFC after: 17 days
Formerly, a command like find dir1/dir2 -delete would delete everything
under dir1/dir2 but not dir1/dir2 itself.
When -L is not specified and "." can be opened, the fts(3) code underlying
find(1) is careful to avoid following symlinks or being dropped in different
locations by moving the directory fts is currently traversing. If a
problematic concurrent modification is detected, fts will not enter the
directory or abort. Files found in the search are returned via the current
working directory and a pathname not containing a slash.
For paranoia, find(1) verifies this when -delete is used. However, it is too
paranoid about the root of the traversal. It is already assumed that the
initial pathname does not refer to directories or symlinks that might be
replaced by untrusted users; otherwise, the whole traversal would be unsafe.
Therefore, it is not necessary to do the check for fts_level ==
FTS_ROOTLEVEL.
Deleting the pathnames given as arguments can be prevented without error
messages using -mindepth 1 or by changing directory and passing "." as
argument to find. This works in the old as well as the new version of find.
Tested by: Kurt Lidl
Reviewed by: jhb
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
Before this change path matching had the following features:
- for device nodes the patterns were matched against full path
- in the above case '/' in a path could be matched by a wildcard
- for directories and links only the last component was matched
So, for example, a pattern like 're*' could match the following entries:
- re0 device
- responder/u0 device
- zvol/recpool directory
Although it was possible to work around this behavior (once it was spotted
and understood), it was very confusing and contrary to documentation.
Now we always match a full path for all types of devfs entries (devices,
directories, links) and a '/' has to be matched explicitly.
This behavior follows the shell globbing rules.
This change is originally developed by Jaakko Heinonen.
Many thanks!
PR: kern/122838
Submitted by: jh
MFC after: 4 weeks
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
to a memory-mapped file in the traced process's address space
even if neither the traced process nor the tracing process had
write access to that file.
Security: CVE-2013-2171
Security: FreeBSD-SA-13:06.mmap
Approved by: so
mergemaster. This allows bootstrap verions of tools to be used.
Add a note to UPDATING about this change.
Discussed with: jhb
Sponsored by: DARPA, AFRL
MFC after: 5 days
Turn on the CTL disable tunable by default.
This will allow GENERIC configurations to boot on small memory boxes, but
not require end users who want to use CTL to recompile their kernel. They
can simply set kern.cam.ctl.disable=0 in loader.conf.
tunable by default.
This will allow GENERIC configurations to boot on small memory boxes, but
not require end users who want to use CTL to recompile their kernel. They
can simply set kern.cam.ctl.disable=0 in loader.conf.
The eventual solution to the memory usage problem is to change the way
CTL allocates memory to be more configurable, but this should fix things
for small memory situations in the mean time.
UPDATING: Explain the change in the CTL configuration, and
how users can enable CTL if they would like to use
it.
sys/conf/options: Add a new option, CTL_DISABLE, that prevents CTL
from initializing.
ctl.c: If CTL_DISABLE is turned on, don't initialize.
i386/conf/GENERIC,
amd64/conf/GENERIC: Re-enable device ctl, and add the CTL_DISABLE
option.
It unfortunately steals a fair chunk of RAM at startup even if it's not
actively used, which prevents FreeBSD VMs of 128MB from successfully
booting and running.
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
* -M <metalog> Log metadata in mtree format.
* -D <destdir> Log paths relative to <destdir>.
* -h <hash> Log digest of type <hash>.
* -T <tags> Specify which mtree tags to log.
* -l <linkflag> Create hard or symbolic links (allows logging).
* -U Install without root privileges (owner, group, mode,
and flags can be logged via -M
NOTE: In the interest of compatibility with NetBSD and because it is the
obvious letter, the nearly useless -M option (disable mmap) has been
repurposed.
Sponsored by: DARPA, AFRL
Obtained from: NetBSD
Reviewed by: bz
'"'. Mangling is only done for label names read from file system
metadata. Encoding resembles URL encoding. For example, the space
character becomes %20.
Help by: kib
Discussed with: imp, kib, pjd
be kept around to the 10 most recent ones.
Add UPDATING entry with info how to return to the previous behaviour (no
limits).
Obtained from: WHEEL Systems
UPDATING by URL.
As there has been some confusion over the need to run "mergemaster -p",
part of our standard upgrade procedure, following the recent addition of
an "auditdistd" user, add a note about it to UPDATING explicitly.
