By updating function arguments for ipsec_kmod_ctlinput() which is used
when loading IPSEC support via kernel modules.
Differential Revision: https://reviews.freebsd.org/D36731
Sponsored by: NVIDIA Networking
In the original design of the network stack from the protocol control
input method pr_ctlinput was used notify the protocols about two very
different kinds of events: internal system events and receival of an
ICMP messages from outside. These events were coded with PRC_ codes.
Today these methods are removed from the protosw(9) and are isolated
to IPv4 and IPv6 stacks and are called only from icmp*_input(). The
PRC_ codes now just create a shim layer between ICMP codes and errors
or actions taken by protocols.
- Change ipproto_ctlinput_t to pass just pointer to ICMP header. This
allows protocols to not deduct it from the internal IP header.
- Change ip6proto_ctlinput_t to pass just struct ip6ctlparam pointer.
It has all the information needed to the protocols. In the structure,
change ip6c_finaldst fields to sockaddr_in6. The reason is that
icmp6_input() already has this address wrapped in sockaddr, and the
protocols want this address as sockaddr.
- For UDP tunneling control input, as well as for IPSEC control input,
change the prototypes to accept a transparent union of either ICMP
header pointer or struct ip6ctlparam pointer.
- In icmp_input() and icmp6_input() do only validation of ICMP header and
count bad packets. The translation of ICMP codes to errors/actions is
done by protocols.
- Provide icmp_errmap() and icmp6_errmap() as substitute to inetctlerrmap,
inet6ctlerrmap arrays.
- In protocol ctlinput methods either trust what icmp_errmap() recommend,
or do our own logic based on the ICMP header.
Differential revision: https://reviews.freebsd.org/D36731
where struct ipsec_methods is defined. Not a functional change.
Allows further modification of method prototypes without breaking
compilation of other ipsec compilation units.
Differential revision: https://reviews.freebsd.org/D36730
The netinet/ipprotosw.h and netinet6/ip6protosw.h were KAME relics, with
the former removed in f0ffb944d2 in 2001 and the latter survived until
today. It has been reduced down to only one useful declaration that
moves to ip6_var.h
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36726
o Assert that every protosw has pr_attach. Now this structure is
only for socket protocols declarations and nothing else.
o Merge struct pr_usrreqs into struct protosw. This was suggested
in 1996 by wollman@ (see 7b187005d1), and later reiterated
in 2006 by rwatson@ (see 6fbb9cf860).
o Make struct domain hold a variable sized array of protosw pointers.
For most protocols these pointers are initialized statically.
Those domains that may have loadable protocols have spacers. IPv4
and IPv6 have 8 spacers each (andre@ dff3237ee5).
o For inetsw and inet6sw leave a comment noting that many protosw
entries very likely are dead code.
o Refactor pf_proto_[un]register() into protosw_[un]register().
o Isolate pr_*_notsupp() methods into uipc_domain.c
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36232
The protosw KPI historically has implemented two quite orthogonal
things: protocols that implement a certain kind of socket, and
protocols that are IPv4/IPv6 protocol. These two things do not
make one-to-one correspondence. The pr_input and pr_ctlinput methods
were utilized only in IP protocols. This strange duality required
IP protocols that doesn't have a socket to declare protosw, e.g.
carp(4). On the other hand developers of socket protocols thought
that they need to define pr_input/pr_ctlinput always, which lead to
strange dead code, e.g. div_input() or sdp_ctlinput().
With this change pr_input and pr_ctlinput as part of protosw disappear
and IPv4/IPv6 get their private single level protocol switch table
ip_protox[] and ip6_protox[] respectively, pointing at array of
ipproto_input_t functions. The pr_ctlinput that was used for
control input coming from the network (ICMP, ICMPv6) is now represented
by ip_ctlprotox[] and ip6_ctlprotox[].
ipproto_register() becomes the only official way to register in the
table. Those protocols that were always static and unlikely anybody
is interested in making them loadable, are now registered by ip_init(),
ip6_init(). An IP protocol that considers itself unloadable shall
register itself within its own private SYSINIT().
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36157
This makes key socket implementation self contained and removes one
of the last dependencies on the raw socket code and pr_output method.
There are very subtle API visible changes:
- now key socket would return EOPNOTSUPP instead of EINVAL on
syscalls that are not supposed to be called on a key socket.
- key socket buffer sizes are now controlled by net.key sysctls instead
of net.raw. The latter were not documented anywhere, and even Internet
search doesn't find any references or discussions related to them.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36123
Currently there is no upper bound on the PMTU value that is accepted.
Update hostcache only if the new pmtu is smaller than the current entry
and the link MTU.
Approved by: mw(mentor)
Sponsored by: Stormshield
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D35872
With clang 15, the following -Werror warning is produced:
sys/netipsec/key_debug.c:923:9: error: variable 'j' set but not used [-Werror,-Wunused-but-set-variable]
int i, j;
^
The 'j' variable was in key_debug.c when it was first added, but it
appears to have been a debugging aid that has never been used, so remove
it.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/netipsec/key.c:6432:15: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
key_getcomb_ah()
^
void
sys/netipsec/key.c:6489:19: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
key_getcomb_ipcomp()
^
void
This is because key_getcomb_ah() and key_getcomb_ipcomp() are declared
with (void) argument lists, but defined with empty argument lists. Make
the definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/netipsec/ipsec_mbuf.c:93:24: error: variable 'alloc' set but not used [-Werror,-Wunused-but-set-variable]
int todo, len, done, alloc;
^
The 'alloc' variable appears to have been a debugging aid that has never
been used for anything, so remove it.
MFC after: 3 days
This mutex is a significant point of contention in the ipsec code, and
can be relatively trivially replaced by a read-mostly lock.
It does require a separate lock for the replay protection, which we do
here by adding a separate mutex.
This improves throughput (without replay protection) by 10-15%.
MFC after: 3 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D35763
key_delsav used to conditionally dereference vnet, leading to panics as
it was getting unset too early.
While the particular condition was removed, it makes sense to handle all
operations of the sort with correct vnet set so change it.
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34313
When TCP_MD5SIG is set on a socket, all packets are dropped that don't
contain an MD5 signature. Relax this behavior to accept a non-signed
packet when a security association doesn't exist with the peer.
This is useful when a listen socket set with TCP_MD5SIG wants to handle
connections protected with and without MD5 signatures.
Reviewed by: bz (previous version)
Sponsored by: nepustil.net
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33227
Return ENOENT from tcp_ipsec_input() when a security association is not
found. This allows callers of TCP_MD5_INPUT() to differentiate between a
security association not found and receiving a bad signature.
Also return ENOENT from tcp_ipsec_output() for consistency.
Reviewed by: ae
Sponsored by: nepustil.net
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33226
The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.
Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537
When adding an SPD entry that already exists, a refcount wraparound
panic is encountered. This was caused from dropping a reference on the
wrong security policy.
Fixes: 4920e38fec ("ipsec: fix race condition in key.c")
Reviewed by: wma
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33100
Same comparison problem as in key_do_getnewspi.
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32827
SPIs get allocated and inserted in separate steps. Prior to the change
there was nothing preventing 2 differnet threads from ending up with the
same one.
PR: 258849
Reported by: Herbie.Robinson@stratus.com
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32826
The 'count' variable would end up being -1 post loop, while the
following condition would check for 0 instead.
PR: 258849
Reported by: Herbie.Robinson@stratus.com
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32826
Discard and send ICMPv6 Packet Too Big to sender when we try to encapsulate
and forward a packet which total length exceeds the PMTU.
Logic is based on the IPv4 implementation.
Common code was moved to a separate function.
Differential revision: https://reviews.freebsd.org/D31771
Obtained from: Semihalf
Sponsored by: Stormshield
If we fail to find to PMTU in hostcache, we assume it's equal
to link's MTU.
This patch prevents packets larger then link's MTU to be dropped
silently if there is no PMTU in hostcache.
Differential revision: https://reviews.freebsd.org/D31770
Obtained from: Semihalf
Sponsored by: Stormshield
pfil_run_hooks which eventually can get called asserts on it.
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32007
key_allocsa() expects to handle only IPSec protocols and has an
assertion to this effect. However, ipsec4_ctlinput() has to handle
messages from ICMP unreachable packets and was not validating the
protocol number. In practice such a packet would simply fail to match
any SADB entries and would thus be ignored.
Reported by: syzbot+6a9ef6fcfadb9f3877fe@syzkaller.appspotmail.com
Reviewed by: ae
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31890
If we matched SP to a packet, but no associated SA was found
ipsec4_allocsa will return NULL while setting error=0.
This resulted in use after free and potential kernel panic.
Return EINPROGRESS if the case described above instead.
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D30994
If an encapsulated frame is going to have DF bit set check its desitnitions'
PMTU and if it won't fit drop it and:
Generate ICMP 3/4 message if the packet was to be forwarded.
Return EMSGSIZE error otherwise.
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D30993
SO_RERROR indicates that receive buffer overflows should be handled as
errors. Historically receive buffer overflows have been ignored and
programs could not tell if they missed messages or messages had been
truncated because of overflows. Since programs historically do not
expect to get receive overflow errors, this behavior is not the
default.
This is really really important for programs that use route(4) to keep
in sync with the system. If we loose a message then we need to reload
the full system state, otherwise the behaviour from that point is
undefined and can lead to chasing bogus bug reports.
Reviewed by: philip (network), kbowling (transport), gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26652
Creation of a zone is expensive and there is no need to have one for
every vnet. Moreover, this wastes memory as these separate zones
cannot use the same per-cpu caches. Finally, this is a step towards
replacing the custom zone with pcpu-16.
Two counter_u64_zero calls induce back-to-back IPIs to zero everything
out. Instead, pass the M_ZERO flag to let uma just iterate all buffers.
The counter(9) API abstraction is already violated by not using
counter_u64_alloc.
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30916
Several protocol methods take a sockaddr as input. In some cases the
sockaddr lengths were not being validated, or were validated after some
out-of-bounds accesses could occur. Add requisite checking to various
protocol entry points, and convert some existing checks to assertions
where appropriate.
Reported by: syzkaller+KASAN
Reviewed by: tuexen, melifaro
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29519
Historically receive buffer overflows have been ignored and programs
could not tell if they missed messages or messages had been truncated
because of overflows. Since programs historically do not expect to get
receive overflow errors, this behavior is not the default.
This is really really important for programs that use route(4) to keep in sync
with the system. If we loose a message then we need to reload the full system
state, otherwise the behaviour from that point is undefined and can lead
to chasing bogus bug reports.
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194