machdep.guessed_bootdev, and add code to sysctl to parse its value
and give a (not necessarily correct) name to the device we booted
from (the main motivation for this code is to use the info in the
PicoBSD boot scripts, and the impact on the kernel is minimal).
NOTE: the information available in bootdev is not always reliable,
so you should not trust it too much. The parsing code is the same
as in boot2.c, and cannot cover all cases -- as it is, it seems to
work fine with floppies and IDE disks recognised by the BIOS. It
_should_ work as well with SCSI disks recognised by the BIOS.
Booting from a CDROM in floppy emulation will return /dev/fd0 (because
this is what the BIOS tells us).
Booting off the network (e.g. with etherboot) leaves bootdev unset so
the value will be printed as "invalid (0xffffffff)".
Finally, this feature might go away at some point, hopefully when we
have a more reliable way to get the same information.
MFC-after: 5 days
src/contrib/isc-dhcp/includes/minires/resolv.h has a 'extern' definition
but it makes an error when linking crunched binary just like this:
dhclient.lo: In function `MRres_nquery':
dhclient.lo(.text+0x2dcce): undefined reference to `__h_errno_set'
dhclient.lo(.text+0x2dd5b): undefined reference to `__h_errno_set'
dhclient.lo: In function `MRres_nquerydomain':
dhclient.lo(.text+0x2de53): undefined reference to `__h_errno_set'
The author understands this will be a problem (see comments in resolv.h).
Murray said that the author will fix this, but as a temporary solution,
modifying the source code and not to use __h_errno_set.
BTW, I'm sorry that previous commitlog in src/sbin/dhclient/Makefile should
read "Found by:" instead of "Confirmed by"; I just found that rev 1.15
has a typo so fixed.
Tested on: ushi.jp.FreeBSD.org with today's 5-current source code.
(belive me, "make release.4" works fine now)
spares (the size of the field was changed from u_short to u_int to
reflect what it really ends up being). Accordingly, change users of
xucred to set and check this field as appropriate. In the kernel,
this is being done inside the new cru2x() routine which takes a
`struct ucred' and fills out a `struct xucred' according to the
former. This also has the pleasant sideaffect of removing some
duplicate code.
Reviewed by: rwatson
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
after an EOT-terminated volume. We keep track of the current record
number, and synchronise it with the c_tapea field each time we read
a header. Avoid the use of c_firstrec because some bugs in dump can
cause it to be set incorrectly.
Move the initialisation of some variables to avoid compiler warnings.
volume if we missed some earlier tapes (the user can still enter
'none' later if the tapes are unavailable). Previously with 'x'
restores, we might not ask for all tapes if the tapes are supplied
in reverse order.
Clarify the message that describes what volume should be mounted
first; reverse order is only efficient when extracting a few files.
for monitoring automated backups. This is based on a patch by Mikhail
Teterin, with some changes to make its operation clearer and to
update the proctitle more frequently.
PR: bin/32138
volumes are available, instead of getting stuck in a loop calling
getvol(). Normally restore in 'x' or 'i' modes will ask for a new
(earlier) volume when the current inode number on the tape is greater
than the last inode to be restored, since there can be no further
inodes of interest on that volume. However we don't want to change
volumes in this case either if the user explicitly said that there
are no more tapes, or if we are looking at the first volume.
When no more volumes are available but there are still inodes that
we have not found, we now just fall through to the code that prints
out a list of any missing files, so the restore completes normally.
Also simplify the logic a bit by always returning to the start of
the main for(;;) loop whenever the volume has changed.
This should completely fix the "Changing volumes on pipe input" bug
that is often observed when restoring dumps of active filesystems.
PR: bin/4176, bin/34604, misc/34675
to multi-volume restores:
- In findinode(), keep a copy of header->c_type so that we don't
exit the do-while loop until we have processed the current header.
Exiting too early leaves curfile.ino set to 0, which confuses
the logic in createfiles(), so multi-volume restores with the
'x' command don't work if you follow the instructions and supply
the tapes in reverse order. This appears to have been broken
by CSRG revision 5.33 tape.c (Oct 1992).
- The logic in getvol() for deciding how many records to skip after
the volume header was confused; sometimes it would skip too few
records and sometimes too many, leading to "resync restore"
warnings and missing files. Skip to the next header only when
the current action is not `USING'. Work around a dump bug that
sets c_count incorrectly in the volume header of the first tape.
Some of the problems here date back to at least 1991.
- Back out revision 1.23. This appeared to avoid warnings about
missing files in the 'rN' verification case, but it made the
problems with the 'x' command worse by stopping getvol() from
even attempting to find the first inode number on the newly
inserted tape. The bug it addressed is fixed by correcting the
skipping logic as described above.
- Save the value of `tpblksread' in case the wrong volume is
supplied, because it is incremented each time we read a volume
header. We already saved `blksread' for the same reson.
Normally trewind() performs a close-open-close cycle to rewind the
tape when closing the device, but this is not ideal for fifos. We
now skip the final open-close if the output descriptor is a fifo.
PR: bin/25474
Submitted by: Alex Bakhtin <bakhtin@amt.ru>
MFC after: 1 week
blocks allocated by some inode. Indirect blocks are printed
recursively, so beware :), the list could become lengthy...
(We should probably add some output pager to fsdb.)
MFC after: 1 month
bloats the resulting binary file by forcing them out of .bss into
.data, while the C standard already guarantees them to become
initialized to 0 at program startup.
MFC after: 1 week
Cure the "lets put everything in registers" ailment.
Set WARNS=2
Fix two problems where casting messed up large quotafiles.
PR: 34108
Submitted by: Maxim Katargin <kmv@asplinux.ru>
MFC after: 3 weeks
This works by retokenizing a line with a split limit so that if the
argument count for a command is greater than the number of arguments
formed by splitting apart the line of user input, the last argument
is instead all of the remainder of the input line.
Yes, I needed this capability at one point to fix a filesystem manually,
which happened to break with a problematic space-containing directory
entry.
