Commit Graph

106328 Commits

Author SHA1 Message Date
Hartmut Brandt
47a4e0e50d Document the correct use of MAKEOBJDIRPREFIX and MAKEOBJDIR.
Requested by: kris
2004-08-11 07:14:11 +00:00
Hartmut Brandt
2f29b4440a Yet another place where we can document that MAKEOBJDIRPREFIX and
MAKEOBJDIR are, and have always been, environment variables.

Requested by: kris
2004-08-11 07:09:43 +00:00
Dmitry Sivachenko
4fc5e85a2f Correct the name of the country I was born in. 2004-08-11 06:44:36 +00:00
Ruslan Ermilov
8fb60283b8 I was born in the USSR. 2004-08-11 06:17:02 +00:00
Marcel Moolenaar
3a00930042 In set_regs(), flush the dirty registers onto the backingstore before
we update the registers. That way we don't have any dirty registers to
worry about and also know that bsp=bspstore, which makes updating the
RSE related registers predictable.
This is not the end of it. We need more validity checks, but for now
this allows us to complete the gdb testsuite without crashing the
kernel.
2004-08-11 05:29:13 +00:00
Bruce A. Mah
7dfdb3c965 Fix a few nits. Mostly grammar and punctuation changes, although some
minor content changes were made to the acpi_asus(4) and
acpi_toshiba(4) notes.
2004-08-11 05:20:25 +00:00
Robert Watson
bf029145fb Add 'axe' interface to NOTES so it is built with LINT as with other USB
network interface device drivers.
2004-08-11 04:44:49 +00:00
Robert Watson
27f74fd0ed Assert the locks of inpcbinfo's and inpcb's passed into in_pcbconnect()
and in_pcbconnect_setup(), since these functions frob the port and
address state of inpcbs.
2004-08-11 04:35:20 +00:00
Scott Long
8ab79fb0e1 Revert rev 1.93 and replace it by grabbing the vr lock before calling
mii_pollstat().  The previous was causing the vr lock to recurse.

PR:	kern/70189
2004-08-11 04:30:49 +00:00
Robert Watson
217a4b6e4e Replace a reference to splnet() with a reference to locking in a comment. 2004-08-11 03:43:10 +00:00
Robert Watson
1510469e95 Mark USB ethernet devices as IFF_NEEDSGIANT, since the USB framework
if_start routines cannot currently be entered without Giant.  When
the kernel is running with debug.mpsafenet != 0, this will defer
if_start execution to a task queue thread holding Giant, which may
introduce additional latency, but avoid incorrect execution.

Suggested by:	dfr
2004-08-11 03:38:55 +00:00
Robert Watson
38c9c1708b Perform a lockless read to test whether an entropy havesting fifo is
full, avoiding the cost of mutex operations if it is.  We re-test
once the mutex is acquired to make sure it's still true before doing
the -modify-write part of the read-modify-write.  Note that due to
the maximum fifo depth being pretty deep, this is unlikely to improve
harvesting performance yet.

Approved by:	markm
2004-08-11 03:33:32 +00:00
Marcel Moolenaar
4da47b2fec Add __elfN(dump_thread). This function is called from __elfN(coredump)
to allow dumping per-thread machine specific notes. On ia64 we use this
function to flush the dirty registers onto the backingstore before we
write out the PRSTATUS notes.

Tested on: alpha, amd64, i386, ia64 & sparc64
Not tested on: arm, powerpc
2004-08-11 02:35:06 +00:00
Robert Watson
b505f47bef Add ADAPTIVE_GIANT to GENERIC on i386, with the intent of making it
a standard configuration similar to [NO_]ADAPTIVE_MUTEXES.  This
feature causes Giant to be included in the set of mutexes adaptively
spun on.  It appears to have a positive effect on performance on SMP
across several workloads, including measurements of a 16% improvement
on buildworld, and 30%+ improvement for MySQL using the supersmack
benchmark with Giant over the network stack; a 6% improvement without
Giant on the network stack (as a result of less giant contention).
2004-08-11 01:34:18 +00:00
Robert Watson
87e83e7d4c In v_addpollinfo(), we allocate storage to back vp->v_pollinfo. However,
we may sleep when doing so; check that we didn't race with another thread
allocating storage for the vnode after allocation is made to a local
pointer, and only update the vnode pointer if it's still NULL.  Otherwise,
accept that another thread got there first, and release the local storage.

Discussed with:	jmg
2004-08-11 01:27:53 +00:00
Maksim Yevmenkin
0209f41086 Update links to the bluez-firmware package
Update md5 hash
2004-08-11 00:22:23 +00:00
Maksim Yevmenkin
285b72aa78 Set IFF_RUNNING flag on the interface as soon as the control device is opened. 2004-08-11 00:12:27 +00:00
Robert Watson
39dfb406e1 Modify vnode locking key: the v_pollinfo pointer itself is protected
by Giant; the contents are protected by the pollinfo mutex.  We rely
on Giant to prevent races in assigning the value of v_pollinfo.
2004-08-10 23:52:45 +00:00
Simon L. B. Nielsen
640c70d92a Add id tags to sections which does not already have one to make it
simpler to link directly into the Hardware Notes.
2004-08-10 22:33:21 +00:00
Simon L. B. Nielsen
f36894b3b5 Auto generate device listings the following drivers: mlx, mly, and ncv. 2004-08-10 22:19:57 +00:00
Simon L. B. Nielsen
930a9a22b0 Add a HARDWARE section which lists supported devices. 2004-08-10 22:17:01 +00:00
Nate Lawson
c7f88fc386 Don't call DEVICE_RESUME a second time if DEVICE_SUSPEND fails. The
bus_generic_suspend method does this for us.  Disable interrupts before
entering S1.  This may help some systems suspend to S1 successfully.
2004-08-10 22:02:52 +00:00
Alan Cox
fad44deea3 Eliminate the acquisition and release of Giant within physio(). Remove
the spl calls.

Reviewed by: phk@
Discussed with: scottl@
2004-08-10 21:47:11 +00:00
Alan Cox
6306df6b89 Add a comment describing pmap_extract_and_hold() noting that the protection
check still needs implementation on arm.
2004-08-10 21:43:40 +00:00
Simon L. B. Nielsen
80efc187ed Add a HARDWARE section which lists supported devices. Clean up device
lists a bit while I'm here anyway.
2004-08-10 21:07:27 +00:00
Alan Cox
2c0680e659 Add pmap locking to many of the functions.
Implement the protection check required by the pmap_extract_and_hold()
specification.

Remove the acquisition and release of Giant from pmap_extract_and_hold() and
pmap_protect().

Many thanks to Ken Smith for resolving a sparc64-specific initialization
problem in my original patch.

Tested by: kensmith@
2004-08-10 20:53:26 +00:00
Lukas Ertl
92f49a969d If we kill the worklist thread of a RAID5 plex we can destroy
the worklist mutex at the same time, so move the mtx_destroy() call
to gv_kill_thread().
2004-08-10 20:51:48 +00:00
Lukas Ertl
ecffb8e64b Lock the topology before calling gv_parse_config, not afterwards. 2004-08-10 20:15:12 +00:00
Pawel Jakub Dawidek
6b2b3e8745 - Recognize HARDCODED flag when dumping consumer configuration.
- Improve code readabilty a bit.
2004-08-10 19:53:31 +00:00
Pawel Jakub Dawidek
c38d2f4eca Forgot to commit those: introduce hardcoded provider functionality,
which allow to store provider's name in the metadata and avoid
problems when few providers share the same last sector.
2004-08-10 19:52:12 +00:00
Marcel Moolenaar
03e62bf373 Comment-out the debugging printf I left in in case there were some
packet related problems. No problems have been reported.
2004-08-10 19:32:33 +00:00
Pawel Jakub Dawidek
4ffa3fef69 Fix one of the lastest commit. This bio_caller1 should also be changed to
bio_driver1 (as all the rest).
This introduced a small memory leak, but it wasn't really critical,
because maximum memory for g_stripe_zone is always set, so after few
requests gstripe was working in "economic" mode.
2004-08-10 19:07:55 +00:00
Wilko Bulte
ce18a76c38 typo 2004-08-10 19:07:41 +00:00
Wilko Bulte
87e469043b There is nothing but real hardware to verify things: 164sx can really
run on non-ECC, plain vanilla PC133 PC SDRAM DIMMs.

Thanks to: obrien@ for the donation of a 164sx mlb.
2004-08-10 19:03:59 +00:00
Colin Percival
d87a987086 Teach sysinstall about the "srescue" distribution, which contains the
contents of /usr/src/rescue.  Until now, the files were shipped with
releases but sysinstall would ignore them (resulting in a non-buildable
source tree).

Sanity checked by:	jhb
2004-08-10 18:18:42 +00:00
John Baldwin
274f8f48e8 Synchronize the extra SA threading checks and return value handling of
condition variables with that of msleep().

Reviewed by:	davidxu
2004-08-10 17:42:59 +00:00
Brian Feldman
ea84c8dc30 Update "documentation date" fields. 2004-08-10 16:38:19 +00:00
Brian Feldman
2a1bb291d5 Document exactly how vslock(9) is broken. 2004-08-10 15:01:00 +00:00
Brian Feldman
831bc6f574 Update mlock(2) manpage to cross-reference m{,un}lockall(2), remove
a case where ENOMEM could be returned by munlock(2), and add possible
system deadlock to the BUGS section.
2004-08-10 14:52:42 +00:00
Brian Feldman
5b2bbd83fc Update contigmalloc(9)'s manpage to reflect usage of the malloc_type
argument and that allocation occurs from the end of the address space
backward (still first-fit).
2004-08-10 14:47:12 +00:00
Brian Feldman
0ada205ee6 Back out all behavioral chnages. 2004-08-10 14:42:48 +00:00
Ruslan Ermilov
de0d0233b8 Describe better what the initial /usr/obj is expected to be populated with.
Prodded by:	grehan
2004-08-10 13:25:29 +00:00
Hartmut Brandt
de5b5e45a0 Fix recent breakage in rescue. We need to build a new crunchgen
that will not emit the bad MAKE=make line that caused the breakage.

Submitted by:	ru
2004-08-10 13:18:05 +00:00
David Xu
4eb32c7e19 Initialize thread_db module. 2004-08-10 12:20:00 +00:00
David Xu
767d9fcf7c As AMD64 architecture volume 1 chapter 3.1.2 says, high 32 bits of %rflags
are resevered, they can be written with anything, but they always read
as zero, we should simulate it in set_regs() as we are reading/writting
real hardware %rflags register.
2004-08-10 12:15:27 +00:00
Hartmut Brandt
0a9d66ca0d Fix the 4.X -> 5.X upgrade path by include <inttypes.h> instead of
stdint.h.
2004-08-10 11:05:25 +00:00
Hartmut Brandt
11eb5b4589 This commit was generated by cvs2svn to compensate for changes in r133429,
which included commits to RCS files with non-trunk default branches.
2004-08-10 11:05:25 +00:00
Joerg Wunsch
0da40ab229 Add documentation for log(9).
MFC after:	1 week
2004-08-10 09:19:08 +00:00
Jeff Roberson
2454aaf51c - Use a new flag, KEF_XFERABLE, to record with certainty that this kse had
contributed to the transferable load count.  This prevents any potential
   problems with sched_pin() being used around calls to setrunqueue().
 - Change the sched_add() load balancing algorithm to try to migrate on
   wakeup.  This attempts to place threads that communicate with each other
   on the same CPU.
 - Don't clear the idle counts in kseq_transfer(), let the cpus do that when
   they call sched_add() from kseq_assign().
 - Correct a few out of date comments.
 - Make sure the ke_cpu field is correct when we preempt.
 - Call kseq_assign() from sched_clock() to catch any assignments that were
   done without IPI.  Presently all assignments are done with an IPI, but I'm
   trying a patch that limits that.
 - Don't migrate a thread if it is still runnable in sched_add().  Previously,
   this could only happen for KSE threads, but due to changes to
   sched_switch() all threads went through this path.
 - Remove some code that was added with preemption but is not necessary.
2004-08-10 07:52:21 +00:00
Marcel Moolenaar
a6c0289214 Favor building the cdrtools port over fetching the package. There
hasn't been any package build for ia64 for a long time and in this
case it means that the cdrtools package on the FTP sites is one that
doesn't have mkisofs. This breaks the release build. By trying to
build the port first, we protect ourselves a bit more against this.
2004-08-10 05:43:40 +00:00