Commit Graph

110 Commits

Author SHA1 Message Date
Nick Hibma
1976c8437b Include libusb in the build 2000-07-02 14:54:22 +00:00
Josef Karthauser
a04f2acdec Disconnect libm from the build tree. It's broken, not being
maintained, and has been replaced by msun.  The libm sources
shouldn't be removed just yet as there are parts that should be
merged into msun first.

PR:		misc/17848
Discussed with:	phk & bde
2000-05-02 14:16:19 +00:00
Kris Kennaway
14b42810e1 Document the libpam dependency on libopie
Reminded by:	bde
2000-04-18 06:13:06 +00:00
Kris Kennaway
bb49f794f5 Buildworld fixes for NO_OPENSSH and NO_OPENSSL
Approved by:	jkh
2000-03-09 06:29:05 +00:00
Bruce Evans
a7c9f05a71 Oops, The dependency of libcrypt on libmd went away before it was "fixed"
here.

Reported by:	peter
2000-01-21 02:00:53 +00:00
Bruce Evans
5f34a652e0 Fixed bitrot in library build order. libmd was not built before
libcrypt and libutil was not built before libpam.

The order here is currently unimportant, but ../Makefile should
descend here to build everything (which currently doesn't work
right) or at least to get the order using `make -V SUBDIR'.
2000-01-17 01:32:39 +00:00
Bruce Evans
c5da4b13a5 Fixed stray backslash in previous commit.
Fixed bitrot in comments about library dependencies.  The list has been
maintained better in ../Makefile.inc1, except it has been uninverted
there so it is hard to use manually.
2000-01-16 04:43:11 +00:00
Robert Watson
cd7249ff6a Enable the building of libposix1e
Reviewed by:	eivind
2000-01-15 19:47:01 +00:00
Yoshinobu Inoue
9a4365d0e0 libipsec and IPsec related apps. (and some KAME related man pages)
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
2000-01-06 12:40:54 +00:00
Peter Wemm
83b8ab27b9 Turn libbind back on, it should be ok now. 1999-11-30 06:13:10 +00:00
Peter Wemm
072355e049 oops, forgot to disconnect libbind while it's broken. 1999-11-30 04:22:25 +00:00
Julian Elischer
4cf49a4355 Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from:  Whistle CVS tree
1999-10-21 09:06:11 +00:00
Boris Popov
f24bb3a4b3 Make libncp actually compiled.
Reviewed by:	mdodd
1999-10-14 06:40:46 +00:00
Mark Murray
f05d1ad2e3 Allow for another telnet in secure (SRA telnet).
Submitted by:	Nick Sayer
1999-10-07 20:02:45 +00:00
Peter Wemm
32d1ebac77 Connect libform/libpanel/libmenu. 1999-09-05 07:55:37 +00:00
Bruce Evans
fac91f241e Fixed disorder in comments.
Build libncurses early again (it had drifted into set of libraries that
have no ordering requirements, but it must be built before libedit here
and before some gnu libraries in ../Makefile.inc1).
1999-09-04 13:08:35 +00:00
Mark Murray
7b2d810a97 Make the libcrypt's build in the correct order. 1999-09-01 09:12:16 +00:00
Peter Wemm
68db232834 Update a comment regarding dependencies on libtermcap and curses etc. 1999-09-01 06:21:52 +00:00
Peter Wemm
430299d4e7 Don't build libtermcap, libcurses, libmytinfo, just libncurses. 1999-08-30 08:15:02 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
David E. O'Brien
94d3e4cb5c Turn off libf2c. Superseeded by EGCS's libg2c. 1999-04-18 09:50:58 +00:00
David E. O'Brien
09ee9e267c Remove references to libg++ and libf2c that aren't needed post-EGCS. 1999-04-14 23:59:09 +00:00
Mark Murray
f3fc2030ea Build libwrap - the core to tcp_wrappers. 1999-03-14 17:56:11 +00:00
Doug Rabson
12e25f330b Enable building libio on the alpha. 1998-12-17 23:02:11 +00:00
Bruce Evans
d14e80a4d3 Fixed SUBDIR order. 1998-11-29 02:47:52 +00:00
John Polstra
60da54eec3 Make sure libskey is built before libpam. It is required for one of
the PAM modules.

Fix the comments describing the PAM dependencies to be consistent
with other related comments.

Restructure the library-building loop slightly, per suggestion from
bde.
1998-11-20 02:03:45 +00:00
John Polstra
4820dc85d6 Enable the building of libpam. Move libradius and libtacplus up in
the list, because they are prerequisites for libpam.
1998-11-18 02:02:27 +00:00
John Polstra
468662e864 Enable libradius and libtacplus. 1998-11-13 01:01:37 +00:00
Bruce Evans
47acf5563c Updated library order and comments about it. This fixes libm not
being built before libf2c and libmd not being built before libatm.
1998-10-13 16:48:43 +00:00
Jordan K. Hubbard
e886e3bd22 Add libdisk back to alpha build. 1998-10-01 14:49:57 +00:00
Justin T. Gibbs
c3deaba902 libscsi is obsoleted by CAM. 1998-09-17 03:56:23 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
9bb268091e Hook up libcam and libdevstat. 1998-09-15 10:22:54 +00:00
Bruce Evans
54020d8a7b Fixed SUBDIR order (libm is no longer a prerequisite for libtcl). 1998-09-07 13:59:15 +00:00
Satoshi Asami
ff5fcc93d4 Remove tcl from /usr/src, according to prior agreement. BTW, tcl-8.0 *is*
a port so there is nothing to be done on that side now.

Approved by:	jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700

>decision is, I'll respect it.

   Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
   Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
   As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
   Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.

-DG

David Greenman
Core-team/Principal Architect, The FreeBSD Project
1998-09-05 12:25:55 +00:00
Bruce Evans
0f09aefa00 csu must be built before all shared libaries for ELF, since ELF shared
libraries are linked to at least crti.o.  Always build it first.
1998-09-02 15:02:18 +00:00
John Birrell
8deb7ff0b0 BINFORMAT -> OBJFORMAT ready for E-day. 1998-08-30 01:57:55 +00:00
Gary Palmer
d78dcde236 Building `compat' on alpha is meaningless (they are i386 libraries) 1998-08-22 14:31:39 +00:00
Mike Smith
a8d0d4d632 Add libstand. 1998-08-20 08:24:07 +00:00
Dag-Erling Smørgrav
163074e1ca Cross my fingers and enable libfetch. 1998-08-17 09:32:07 +00:00
John Birrell
18381dac5f Build libkvm on alpha too. 1998-08-15 12:36:42 +00:00
Peter Wemm
c932f88612 If building and installing libdescrypt, do it first so that the symlinks
point to it rather than libscrypt.

This was how it was done prior to libscrypt being added in.  This should
stop more people getting burnt with the /usr/lib -> /usr/lib/aout
transition, and the same when the ELF libs come online.
1998-05-27 18:42:36 +00:00
John Birrell
d788c4fb65 libtcl now builds (with lots of pointer to int cast warnings) on alpha. 1998-05-13 22:54:03 +00:00
Peter Wemm
8e3465ed9f Add libbind 1998-05-03 05:06:13 +00:00
Mark Murray
efa3929e79 Build both libscrypt and libdescrypt. There is no point in letting
libscrypt stagnate, even if it is superceded by libdescrypt. It is
a tiny library anyway, and building it is inexpensive.
1998-03-21 08:18:57 +00:00
Bruce Evans
c9811e98d6 Build the libraries in a correct order. Reorganized the ifdefs so
that the order is easy to see.
1998-03-19 16:56:58 +00:00
John Birrell
5f160d1454 Can build libc and libc_r on alpha now.
Changed MACHINE to MACHINE_ARCH with the expectation that pc98 will
use elf the same as i386.

Nuked tahoe and vax 'cause the files they reference aren't in the
tree. If you want vax goto NetBSD. If you want tahoe... tough.
1998-03-08 23:24:05 +00:00
John Polstra
f0a8e032c6 Enable csu/i386-elf under the appropriate conditions. 1998-03-07 20:30:18 +00:00
John Birrell
fdbac8827e We can now build libm on Alpha. There is very little MD alpha code. 1998-01-10 22:51:51 +00:00
John Birrell
6a7a98c954 Bruce says that ${.CURDIR}/csu/${MACHINE} will prevent finding a
stale obj directory and we wouldn't want to do that! I trust he knows
what he's talking about. 8-)

Also avoid building libm at all until the NetBSD asm code is imported.
I wrongly commented this out last time. Oops.
1998-01-10 09:09:24 +00:00