Protect pager object list manipulation with a mutex.
It doesn't look possible to combine them under a single sx lock because
creation may block and we can't have the object list manipulation block
on anything other than a mutex because of interrupt requests.
available.
Only directory vnodes holding no child directory vnodes held in
v_cache_src are recycled, so that directory vnodes near the root of
the filesystem hierarchy remain in namecache and directory vnodes are
not reclaimed in cascade.
The period of vnode reclaiming attempt and the number of vnodes
attempted to reclaim can be tuned via sysctl(2).
Suggested by: tegge
Approved by: phk
Add TI4451 as well.
These are untested since I don't have the hardware to test against.
Also, some O2Micro devices are #define w/o numbers as place holders so that
I can encourage people to submit them when they appear in the channels.
parts. This is based on the newcard code that turns it off :-). We
can now reboot after NEWCARD or Windows and have OLDCARD work. Add
support for the RL5C466 while I'm at it.
Treat TI1031 the same as the CLPD6832. It doesn't work yet, but sucks
less than it did before.
Also add a few #defines for other changes in the pipe.
and __i386__ are defined rather than if SMP and BETTER_CLOCK are defined.
The removal of BETTER_CLOCK would have broken this except that kern_clock.c
doesn't include <machine/smptests.h>, so it doesn't see the definition of
BETTER_CLOCK, and forward_*clock aren't called, even on 4.x. This seems to
fix the problem where a n-way SMP system would see 100 * n clk interrupts
and 128 * n rtc interrupts.
and AS4100s into single user mode. This work was done jointly by jhb and
myself, and builds on dfr's earlier work.
smp_init_secondary() / smp_start_secondary()
- use the uniq val to pass the globalp (me)
- fancy footwork to take any pending machine checks (me)
- doing things the FreeBSD way and getting the per-cpu idleproc created
correctly, and synchronizing the startup of secondaries (jhb)
mp_start()
- better recognition of available cpus (jhb)
smp_rendezvous()
- if smp hasn't started, only run the rendezvous function on the current
cpu. Sleuthing and (prior) incorrect fix by me, correct fix by jhb
smp_handle_ipi()
- more verbose handling of console messages (jhb)
- grab sched lock around setting PS_ASTPENDING (jhb)
forward_*clock()
- commented out. Joint decision by dfr, jhb and myself
General synchronization improvements (more mb()s, etc) (jhb)
Printf cleanups (joint)
Whitespace cleanups (jhb)
- don't do the stack overflow sanity check on MP systems -- p->p_addr
will be malloc'ed memory (not K0SEG) and the check will fail.
- don't ignore clock interrupts on secondaries. Alphas apparently
roundrobin clock interrupts to all cpus, so we're going to take clock
interrupts on all CPUS and not forward them.
- use the unique value to save the per-cpu globalp struct like the
comment says
- don't lower the ipl to ALPHA_PSL_IPL_HIGH: we may have a pending machine
check to take and we're not prepared for that yet, as we haven't setup
our interrupt entry points. (this may only happen on sable/lynx)
- indicate the fact that the working version of smp_init_secondary() doesn't
return (this is tied up in other changes and hasn't yet been committed).
VOP_BWRITE() was a hack which made it possible for NFS client
side to use struct buf with non-bio backing.
This patch takes a more general approach and adds a bp->b_op
vector where more methods can be added.
The success of this patch depends on bp->b_op being initialized
all relevant places for some value of "relevant" which is not
easy to determine. For now the buffers have grown a b_magic
element which will make such issues a tiny bit easier to debug.
sized blocks. To enable this option, use: `sysctl -w debug.bigcgs=1'.
Add debugging option to disable background writes of cylinder
groups. To enable this option, use: `sysctl -w debug.dobkgrdwrite=0'.
These debugging options should be tried on systems that are panicing
with corrupted cylinder group maps to see if it makes the problem
go away. The set of panics in question are:
ffs_clusteralloc: map mismatch
ffs_nodealloccg: map corrupted
ffs_nodealloccg: block not in map
ffs_alloccg: map corrupted
ffs_alloccg: block not in map
ffs_alloccgblk: cyl groups corrupted
ffs_alloccgblk: can't find blk in cyl
ffs_checkblk: partially free fragment
The following panics are less likely to be related to this problem,
but might be helped by these debugging options:
ffs_valloc: dup alloc
ffs_blkfree: freeing free block
ffs_blkfree: freeing free frag
ffs_vfree: freeing free inode
If you try these options, please report whether they helped reduce your
bitmap corruption panics to Kirk McKusick at <mckusick@mckusick.com>
and to Matt Dillon <dillon@earth.backplane.com>.
ACL_USER_OBJ and ACL_GROUP_OBJ fields, believing that modification of the
access ACL could be used by privileged processes to change file/directory
ownership. In fact, this is incorrect; ACL_*_OBJ (+ ACL_MASK and
ACL_OTHER) should have undefined ae_id fields; this commit attempts
to correct that misunderstanding.
o Modify arguments to vaccess_acl_posix1e() to accept the uid and gid
associated with the vnode, as those can no longer be extracted from
the ACL passed as an argument. Perform all comparisons against
the passed arguments. This actually has the effect of simplifying
a number of components of this call, as well as reducing the indent
level, but now seperates handling of ACL_GROUP_OBJ from ACL_GROUP.
o Modify acl_posix1e_check() to return EINVAL if the ae_id field of
any of the ACL_{USER_OBJ,GROUP_OBJ,MASK,OTHER} entries is a value
other than ACL_UNDEFINED_ID. As a temporary work-around to allow
clean upgrades, set the ae_id field to ACL_UNDEFINED_ID before
each check so that this cannot cause a failure in the short term
(this work-around will be removed when the userland libraries and
utilities are updated to take this change into account).
o Modify ufs_sync_acl_from_inode() so that it forces
ACL_{USER_OBJ,GROUP_OBJ,MASK,OTHER} ae_id fields to ACL_UNDEFINED_ID
when synchronizing the ACL from the inode.
o Modify ufs_sync_inode_from_acl to not propagate uid and gid
information to the inode from the ACL during ACL update. Also
modify the masking of permission bits that may be set from
ALLPERMS to (S_IRWXU|S_IRWXG|S_IRWXO), as ACLs currently do not
carry none-ACCESSPERMS (S_ISUID, S_ISGID, S_ISTXT).
o Modify ufs_getacl() so that when it emulates an access ACL from
the inode, it initializes the ae_id fields to ACL_UNDEFINED_ID.
o Clean up ufs_setacl() substantially since it is no longer possible
to perform chown/chgrp operations using vop_setacl(), so all the
access control for that can be eliminated.
o Modify ufs_access() so that it passes owner uid and gid information
into vaccess_acl_posix1e().
Pointed out by: jedger
Obtained from: TrustedBSD Project
panic_cpu shared variable. I used a simple atomic operation here instead
of a spin lock as it seemed to be excessive overhead. Also, this can avoid
recursive panics if, for example, witness is broken.
can happen if witness runs out of resources during initialization or if
witness_skipspin is enabled.
Sleuthing by: Peter Jeremy <peter.jeremy@alcatel.com.au>
"inside" of locked regions. That is, an acquire atomic operation will
always enforce a memory barrier after the atomic operation and a release
operation will always enforce a memory barrier before the atomic
operation.
- Explicitly use 'mb' instead of 'wmb' in release atomic operations. The
'wmb' memory barrier is not strong enough to guarantee coherence with
other processors. This is effectively a nop since alpha_wmb() actually
performs a 'mb' and not a 'wmb', but I wanted the code to be more
correct since at some point in the future alpha_wmb()'s implementation
may switch to being a real 'wmb'.
we should call ast(). This allows us to branch to a separate Lkernelret
label so we can fixup the saved t7 register in the trapframe. Otherwise
we can run into a problem on SMP systems where a process is interrupted by
a trap or interrupt on one CPU, migrates to another CPU, and then returns
with the t7 in the stack clobbering the CPU's t7. As a result, two CPU's
would both point to the same per-CPU data and things would go downhill from
there.
Sleuthing help by: gallatin
- Add a new ddb command: 'show pcpu' similar to the i386 command added
recently. By default it displays the current CPU's info, but an optional
argument can specify the logical ID of a specific CPU to examine.
bcopy would go off the end of the array by two elements, which sometimes
causes a panic if it happens to cross into a page that isn't mapped.
Submitted by: gibbs
Reviewed by: peter
