Commit Graph

78 Commits

Author SHA1 Message Date
Conrad Meyer
e2e050c8ef Extract eventfilter declarations to sys/_eventfilter.h
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.

EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).

As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions.  The remainder of the patch addresses
adding appropriate includes to fix those files.

LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).

No functional change (intended).  Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed.  __FreeBSD_version has been bumped.
2019-05-20 00:38:23 +00:00
Andrey V. Elsukov
699281b545 Rework locking in BPF code to remove rwlock from fast path.
On high packets rate the contention on rwlock in bpf_*tap*() functions
can lead to packets dropping. To avoid this, migrate this code to use
epoch(9) KPI and ConcurrencyKit's lists.

* all lists changed to use CK_LIST;
* reference counting added to bpf_if and bpf_d;
* now bpf_if references ifnet and releases this reference on destroy;
* each bpf_d descriptor references bpf_if when it is attached;
* new struct bpf_program_buffer introduced to keep BPF filter programs;
* bpf_program_buffer, bpf_d and bpf_if structures are freed by
  epoch_call();
* bpf_freelist and ifnet_departure event are no longer needed, thus
  both are removed;

Reviewed by:	melifaro
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D20224
2019-05-13 13:45:28 +00:00
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Xin LI
ada6f083b9 MFV r313676: libpcap 1.8.1
MFC after:	1 month
2017-02-13 08:23:39 +00:00
Pedro F. Giffuni
a4641f4eaa sys/net*: minor spelling fixes.
No functional change.
2016-05-03 18:05:43 +00:00
Bjoern A. Zeeb
05fc416403 During if_vmove() we call if_detach_internal() which in turn calls the event
handler notifying about interface departure and one of the consumers will
detach if_bpf.
There is no way for us to re-attach this easily as the DLT and hdrlen are
only given on interface creation.
Add a function to allow us to query the DLT and hdrlen from a current
BPF attachment and after if_attach_internal() manually re-add the if_bpf
attachment using these values.

Found by panics triggered by nd6 packets running past BPF_MTAP() with no
proper if_bpf pointer on the interface.

Also add a basic DDB show function to investigate the if_bpf attachment
of an interface.

Reviewed by:	gnn
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D5896
2016-04-11 10:00:38 +00:00
Luiz Otavio O Souza
f87e372ef2 Remove two unnecessary sleeps from the hot path in bpf(4).
The first one never triggers because bpf_canfreebuf() can only be true for
zero-copy buffers and zero-copy buffers are not read with read(2).

The second also never triggers, because we check the free buffer before
calling ROTATE_BUFFERS().  If the hold buffer is in use the free buffer
will be NULL and there is nothing else to do besides drop the packet.  If
the free buffer isn't NULL the hold buffer _is_ free and it is safe to
rotate the buffers.

Update the comment in ROTATE_BUFFERS macro to match the logic described
here.

While here fix a few typos in comments.

MFC after:	2 weeks
Sponsored by:	Rubicon Communications (Netgate)
2015-07-31 21:43:27 +00:00
Mark Johnston
b23cbbe6db Move the definition of struct bpf_if to bpf.c.
A couple of fields are still exposed via struct bpf_if_ext so that
bpf_peers_present() can be inlined into its callers. However, this change
eliminates some type duplication in the resulting CTF container, since
otherwise ctfmerge(1) propagates the duplication through all types that
contain a struct bpf_if.

Differential Revision:	https://reviews.freebsd.org/D2319
Reviewed by:	melifaro, rpaulo
2015-04-20 22:08:11 +00:00
Xin LI
681ed54caa MFV r276759: libpcap 1.6.2.
MFC after:	1 month
2015-01-06 22:29:12 +00:00
Gleb Smirnoff
eaeb0c139a Style: s/SYS_EVENTHANDLER_H/_SYS_EVENTHANDLER_H_/g
Submitted by:	bde
2013-10-28 20:32:05 +00:00
Gleb Smirnoff
7ced9c2f66 Instead of putting ifnet declaration into eventhandler.h, move
bpf(4) and vlan(4) related event declarations to bpf.h and
if_vlan_var.h. To avoid dependency on eventhandler.h, protect
these declarations with ifdef SYS_EVENTHANDLER_H.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-28 07:45:03 +00:00
Guy Helmer
3b3b91e736 Changes to resolve races in bpfread() and catchpacket() that, at worst,
cause kernel panics.

Add a flag to the bpf descriptor to indicate whether the hold buffer
is in use. In bpfread(), set the "hold buffer in use" flag before
dropping the descriptor lock during the call to bpf_uiomove().
Everywhere else the hold buffer is used or changed, wait while
the hold buffer is in use by bpfread(). Add a KASSERT in bpfread()
after re-acquiring the descriptor lock to assist uncovering any
additional hold buffer races.
2012-12-10 16:14:44 +00:00
Xin LI
15752fa858 MFV: libpcap 1.3.0.
MFC after:	4 weeks
2012-10-05 18:42:50 +00:00
Alexander V. Chernikov
afa85850e7 Fix old panic when BPF consumer attaches to destroying interface.
'flags' field is added to the end of bpf_if structure. Currently the only
flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd()
Problem can be easily triggered on SMP stable/[89] by the following command (sort of):
'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done'

Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory,
while interface is still UP and there can be routes via this interface.
Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api.

Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet
matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches)

Approved by:      kib(mentor)
MFC in:            4 weeks
2012-05-21 22:17:29 +00:00
Xin LI
47db53c31a Sync DLTs with the latest pcap version.
MFC after:	2 weeks
2012-05-14 05:10:41 +00:00
Alexander V. Chernikov
51ec1eb70d - Improve performace for writer-only BPF users.
Linux and Solaris (at least OpenSolaris) has PF_PACKET socket families to send
raw ethernet frames. The only FreeBSD interface that can be used to send raw frames
is BPF. As a result, many programs like cdpd, lldpd, various dhcp stuff uses
BPF only to send data. This leads us to the situation when software like cdpd,
being run on high-traffic-volume interface significantly reduces overall performance
since we have to acquire additional locks for every packet.

Here we add sysctl that changes BPF behavior in the following way:
If program came and opens BPF socket without explicitly specifyin read filter we
assume it to be write-only and add it to special writer-only per-interface list.
This makes bpf_peers_present() return 0, so no additional overhead is introduced.
After filter is supplied, descriptor is added to original per-interface list permitting
packets to be captured.

Unfortunately, pcap_open_live() sets catch-all filter itself for the purpose of
setting snap length.

Fortunately, most programs explicitly sets (event catch-all) filter after that.
tcpdump(1) is a good example.

So a bit hackis approach is taken: we upgrade description only after second
BIOCSETF is received.

Sysctl is named net.bpf.optimize_writers and is turned off by default.

- While here, document all sysctl variables in bpf.4

Sponsored by Yandex LLC

Reviewed by:    glebius (previous version)
Reviewed by:    silence on -net@
Approved by:    (mentor)

MFC after:      4 weeks
2012-04-06 06:55:21 +00:00
Alexander V. Chernikov
e4b3229aa5 - Improve BPF locking model.
Interface locks and descriptor locks are converted from mutex(9) to rwlock(9).
This greately improves performance: in most common case we need to acquire 1
reader lock instead of 2 mutexes.

- Remove filter(descriptor) (reader) lock in bpf_mtap[2]
This was suggested by glebius@. We protect filter by requesting interface
writer lock on filter change.

- Cover struct bpf_if under BPF_INTERNAL define. This permits including bpf.h
without including rwlock stuff. However, this is is temporary solution,
struct bpf_if should be made opaque for any external caller.

Found by:       Dmitrij Tejblum <tejblum@yandex-team.ru>
Sponsored by:   Yandex LLC

Reviewed by:    glebius (previous version)
Reviewed by:    silence on -net@
Approved by:    (mentor)

MFC after:      3 weeks
2012-04-06 06:53:58 +00:00
Lawrence Stewart
253a3814d4 Revert r228986 until it can be reworked to avoid panicing the kernel when the
same interface is attached multiple times with different DLTs, as is done in
net80211 for example.

Reported by:	adrian
2011-12-31 07:21:28 +00:00
Lawrence Stewart
0f89fc22f3 - Introduce the net.bpf.tscfg sysctl tree and associated code so as to make one
aspect of time stamp configuration per interface rather than per BPF
  descriptor. Prior to this, the order in which BPF devices were opened and the
  per descriptor time stamp configuration settings could cause non-deterministic
  and unintended behaviour with respect to time stamping. With the new scheme, a
  BPF attached interface's tscfg sysctl entry can be set to "default", "none",
  "fast", "normal" or "external". Setting "default" means use the system default
  option (set with the net.bpf.tscfg.default sysctl), "none" means do not
  generate time stamps for tapped packets, "fast" means generate time stamps for
  tapped packets using a hz granularity system clock read, "normal" means
  generate time stamps for tapped packets using a full timecounter granularity
  system clock read and "external" (currently unimplemented) means use the time
  stamp provided with the packet from an underlying source.

- Utilise the recently introduced sysclock_getsnapshot() and
  sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
  packet, regardless of the number of BPF descriptors and time stamp formats
  requested. Use the per BPF attached interface time stamp configuration to
  control if sysclock_getsnapshot() is called and whether the system clock read
  is fast or normal. The per BPF descriptor time stamp configuration is then
  used to control how the system clock snapshot is converted to a bintime by
  sysclock_snap2bintime().

- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
  read of the system clock is now controlled per BPF attached interface using
  the net.bpf.tscfg sysctl tree.

- Update the bpf.4 man page.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

In collaboration with:	Julien Ridoux (jridoux at unimelb edu au)
2011-12-30 08:57:58 +00:00
Lawrence Stewart
3e47c78798 Revert r227778 in preparation for committing reworked patches in its place. 2011-11-29 12:55:26 +00:00
Lawrence Stewart
b6f1c7db32 - When feed-forward clock support is compiled in, change the BPF header to
contain both a regular timestamp obtained from the system clock and the
  current feed-forward ffcounter value. This enables new possibilities including
  comparison of timekeeping performance and timestamp correction during post
  processing.

- Add the net.bpf.ffclock_tstamp sysctl to provide a choice between timestamping
  packets using the feedback or feed-forward system clock.

Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.

For more information, see http://www.synclab.org/radclock/

Submitted by:	Julien Ridoux (jridoux at unimelb edu au)
2011-11-21 04:17:24 +00:00
Rui Paulo
09b6dcf968 Sync DLTs with the latest pcap version. 2010-10-29 18:41:09 +00:00
Jung-uk Kim
547d94bde3 Implement flexible BPF timestamping framework.
- Allow setting format, resolution and accuracy of BPF time stamps per
listener.  Previously, we were only able to use microtime(9).  Now we can
set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command.
Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP
command.  Document all supported options in bpf(4) and their uses.

- Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'.
The new time stamp has both 64-bit second and fractional parts.  bpf_xhdr
has this time stamp instead of 'struct timeval' for bh_tstamp.  The new
structures let us use bh_tstamp of same size on both 32-bit and 64-bit
platforms without adding additional shims for 32-bit binaries.  On 64-bit
platforms, size of BPF header does not change compared to bpf_hdr as its
members are already all 64-bit long.  On 32-bit platforms, the size may
increase by 8 bytes.  For backward compatibility, struct bpf_hdr with
struct timeval is still the default header unless new time stamp format is
explicitly requested.  However, the behaviour may change in the future and
all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now.

- Add experimental support for tagging mbufs with time stamps from a lower
layer, e.g., device driver.  Currently, mbuf_tags(9) is used to tag mbufs.
The time stamps must be uptime in 'struct bintime' format as binuptime(9)
and getbinuptime(9) do.

Reviewed by:	net@
2010-06-15 19:28:44 +00:00
Rui Paulo
dcf377edf1 Sync DLTs with latest libpcap version. 2009-04-02 13:02:12 +00:00
Jung-uk Kim
18b6f05552 Revert the previous commit to fix buildworld for now.
We have constified 'struct bpf_insn *' for bpf_filter(9) and bpf_validate(9)
since r1.19 but they conflict with pcap.h from libpcap.
2008-08-26 16:12:49 +00:00
Jung-uk Kim
32688992ef Make sys/net/bpf_filter.c build cleanly on user land. 2008-08-26 00:09:26 +00:00
David Malone
f11c35082b Add a new ioctl for changing the read filter (BIOCSETFNR). This is
just like BIOCSETF but it doesn't drop all the packets buffered on
the discriptor and reset the statistics.

Also, when setting the write filter, don't drop packets waiting to
be read or reset the statistics.

PR:		118486
Submitted by:	Matthew Luckie <mluckie@cs.waikato.ac.nz>
MFC after:	1 month
2008-07-07 09:25:49 +00:00
Christian S.J. Peron
4d621040ff Introduce support for zero-copy BPF buffering, which reduces the
overhead of packet capture by allowing a user process to directly "loan"
buffer memory to the kernel rather than using read(2) to explicitly copy
data from kernel address space.

The user process will issue new BPF ioctls to set the shared memory
buffer mode and provide pointers to buffers and their size. The kernel
then wires and maps the pages into kernel address space using sf_buf(9),
which on supporting architectures will use the direct map region. The
current "buffered" access mode remains the default, and support for
zero-copy buffers must, for the time being, be explicitly enabled using
a sysctl for the kernel to accept requests to use it.

The kernel and user process synchronize use of the buffers with atomic
operations, avoiding the need for system calls under load; the user
process may use select()/poll()/kqueue() to manage blocking while
waiting for network data if the user process is able to consume data
faster than the kernel generates it. Patchs to libpcap are available
to allow libpcap applications to transparently take advantage of this
support. Detailed information on the new API may be found in bpf(4),
including specific atomic operations and memory barriers required to
synchronize buffer use safely.

These changes modify the base BPF implementation to (roughly) abstrac
the current buffer model, allowing the new shared memory model to be
added, and add new monitoring statistics for netstat to print. The
implementation, with the exception of some monitoring hanges that break
the netstat monitoring ABI for BPF, will be MFC'd.

Zerocopy bpf buffers are still considered experimental are disabled
by default. To experiment with this new facility, adjust the
net.bpf.zerocopy_enable sysctl variable to 1.

Changes to libpcap will be made available as a patch for the time being,
and further refinements to the implementation are expected.

Sponsored by:		Seccuris Inc.
In collaboration with:	rwatson
Tested by:		pwood, gallatin
MFC after:		4 months [1]

[1] Certain portions will probably not be MFCed, specifically things
    that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
Robert Watson
2a0a392e1c Remove trailing whitespace from lines in BPF.
MFC after:	3 days
2007-12-23 14:10:33 +00:00
Max Laier
19ed78ce27 Additions from libpcap 0.9.8 unbreak the build.
Pointy hat to:	mlaier
X-MFC after:	RELENG_7 buildworld
2007-10-21 13:23:32 +00:00
Jung-uk Kim
560a54e10c Add three new ioctl(2) commands for bpf(4).
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF.  Set to BPF_D_IN to see only incoming packets on the
interface.  Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface.  Set to BPF_D_OUT to see only outgoing
packets on the interface.  This setting is initialized to BPF_D_INOUT
by default.  BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.

- BIOCFEEDBACK sets packet feedback mode.  This allows injected packets
to be fed back as input to the interface when output via the interface is
successful.  When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication.  This flag is initialized to
zero by default.

Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.

Reviewed by:	rwatson
2007-02-26 22:24:14 +00:00
Sam Leffler
f09c8c4a46 more juniper dlt's
MFC after:	1 month
2006-09-04 19:24:34 +00:00
Christian S.J. Peron
7eae78a419 If bpf(4) has not been compiled into the kernel, initialize the bpf interface
pointer to a zeroed, statically allocated bpf_if structure. This way the
LIST_EMPTY() macro will always return true. This allows us to remove the
additional unconditional memory reference for each packet in the fast path.

Discussed with:	sam
2006-06-14 02:23:28 +00:00
Christian S.J. Peron
ffdc0471d4 Back out previous two commits, this caused some problems in the namespace
resulting in some build failures. Instead, to fix the problem of bpf not
being present, check the pointer before dereferencing it.

This is a temporary bandaid until we can decide on how we want to handle
the bpf code not being present. This will be fixed shortly.
2006-06-03 18:48:14 +00:00
Christian S.J. Peron
727b73816c Temporarily include files so that our macro checks do something useful. 2006-06-03 18:16:54 +00:00
Christian S.J. Peron
5255290c9c Make sure we don't try to dereference the the if_bpf pointer when bpf has
not been compiled into the the kernel.

Submitted by:	benno
2006-06-03 06:37:00 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Christian S.J. Peron
93e39f0b93 Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands
enhance the security of bpf(4) by further relinquishing the privilege of
the bpf(4) consumer (assuming the ioctl commands are being implemented).

Once BIOCLOCK is executed, the device becomes locked which prevents the
execution of ioctl(2) commands which can change the underly parameters of the
bpf(4) device. An example might be the setting of bpf(4) filter programs or
attaching to different network interfaces.

BIOCSETWF can be used to set write filters for outgoing packets. Currently if
a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used
as a raw socket, regardless of consumer's UID. Write filters give users the
ability to constrain which packets can be sent through the bpf(4) descriptor.

These features are currently implemented by a couple programs which came from
OpenBSD, such as the new dhclient and pflogd.

-Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify
 whether a read or write filter is to be set.
-Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the
 filter program on the mbuf data once we move the packet in from user-space.
-Rather than execute two uiomove operations, (one for the link header and the
 other for the packet data), execute one and manually copy the linker header
 into the sockaddr structure via bcopy.
-Restructure bpf_setf to compensate for write filters, as well as read.
-Adjust bpf(4) stats structures to include a bd_locked member.

It should be noted that the FreeBSD and OpenBSD implementations differ a bit in
the sense that we unconditionally enforce the lock, where OpenBSD enforces it
only if the calling credential is not root.

Idea from:	OpenBSD
Reviewed by:	mlaier
2005-08-22 19:35:48 +00:00
Sam Leffler
e0d80bffb5 additions from libpcap 0.9.1 release
Approved by:	re (scottl)
2005-07-11 03:16:23 +00:00
Sam Leffler
f6f1669c0f integrate changes from libpcap-0.9.1-096
Reviewed by:	bms
2005-05-28 21:56:41 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
David Malone
bde800e688 Make the comment for DLT_NULL slightly more accurate.
PR:		62272
Submitted by:	Radim Kolar <hsn@netmag.cz>
MFC after:	1 week
2004-05-30 17:03:48 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Bruce M Simpson
1acc2f81b1 Add more DLT types required by libpcap 0.8.3.
Maintain numeric sort order.
2004-03-31 14:22:13 +00:00
Bruce M Simpson
a7135a6201 Update system bpf headers for libpcap 0.8.3.
Maintain listing of DLT link types in numeric order.
2004-03-31 14:09:26 +00:00
Max Laier
cc5934f5af Tweak existing header and other build infrastructure to be able to build
pf/pflog/pfsync as modules. Do not list them in NOTES or modules/Makefile
(i.e. do not connect it to any (automatic) builds - yet).

Approved by: bms(mentor)
2004-02-26 03:53:54 +00:00
Sam Leffler
437ffe1823 o eliminate widespread on-stack mbuf use for bpf by introducing
a new bpf_mtap2 routine that does the right thing for an mbuf
  and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
  when prepending the address family (several places were assuming
  sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
  mbufs have been eliminated; this may better be moved to the bpf
  routines

Reviewed by:	arch@ and several others
2003-12-28 03:56:00 +00:00
Mike Silbersack
d7be4a893c Remove the call to M_ASSERTVALID from BPF_MTAP; some mbufs passed to
mpf are allocated on the stack, which causes this check to falsely trigger.

A new check which takes on-stack mbufs into account will be reintroduced
after 5.2 is out the door.

Approved by:	re (watson)
Requested by:	many
2003-11-28 18:48:59 +00:00
Mike Silbersack
5d5b5d0f99 Add a new macro M_ASSERTVALID which ensures that the mbuf in question
is non-free.  (More checks can/should be added in the future.)

Use M_ASSERTVALID in BPF_MTAP so that we catch when freed mbufs are
passed in, even if no bpf listeners are active.

Inspired by a bug in if_dc caught by Kenjiro Cho.
2003-10-19 22:33:41 +00:00