patches and files. Note this is just for testing -- I don't
expect "patches.OpenBSD" or "Makefile.alpha" start cropping up on
our ports tree just yet!
Pretty much ignored by: the ports/committers list
(2) Add "SH?=/bin/sh" to the list of command-name macros. Use it.
Checked by: recompiling all packages
it also sets RUN_DEPENDS (USE_GMAKE is BUILD_DEPENDS only).
The (immediate) purpose of this is to avoid having to change 70
zillion ports when the version of perl changes. Also, when perl5 is
pulled into -current, this will become a no-op in -current's
bsd.port.mk.
Reviewed by: jfitz
(bsd.dep.mk) and compiling assembly language sources (bsd.lib.mk).
This doesn't change anything for our current source tree, but if you
want to use the -B switch in C*FLAGS to specify the location of
compiler subprograms, now you can do it.
Reviewed by: bde (implicitly)
"do-install" target to the beginning of the "install" meta-target, so
that ports that define their own do-install will also run it without
having to duplicate it themselves.
Tested by: rebuilding all packages
like bsd.lib.mk and bsd.prog.mk. It doesn't add it to CXXINCLUDES, I
don't think anybody has written a kernel module with C++. (Not that I
think DavidG will allow it anyway. :)
Reviewed by: bde
/usr/X11R6 if USE_IMAKE or USE_X11 is set. It is mostly designed
after the XFree86 distribution, but also includes some of our own
goodies (libexec, share/doc, etc/rc.d).
(2) Full support for per-port dependency target. An optional
":<target>" can be added to any of the *_DEPENDS variables. Do
not attempt to print out anything about dependencies if NO_DEPENDS
is set (there was already too much code duplication, and this
extra colon has really pushed it over the limit).
Requested by: jfitz
(3) Make "reinstal" pmake-safe.
Reminded in an e-mail from: jkh
Murphy's Law: define LPR=true in /etc/make.conf if you don't want
tomorrow find 3 paper copies (ascii, latin1, postscript) of the
handbook in your printer (or someone else printer on the other half of
the world).
libraries. Remove the now-unneeded CPLUSPLUSLIB hack. I will also
remove the CPLUSPLUSLIB definitions from the Makefiles that use it,
after the dust settles.
Use gcc's LIBRARY_PATH environment variable to handle DESTDIR,
instead of -L flags in LDDESTDIR. LIBRARY_PATH is documented in
the gcc info pages. It is better than using -L flags, because it
modifies the search for start-up files as well as for libraries.
A new variable LDDESTDIRENV is used to contain the normally-empty
LIBRARY_PATH environment setting.
LDDESTDIR is no longer set in <bsd.lib.mk>. It is still honored for
the time being, because a couple of userland Makefiles still (wrongly)
set it. These should be fixed, and LDDESTDIR should vanish.
Removed the commented-out "LDDESTDIR+=-nostdlib", because "gcc -shared"
doesn't link in any standard libraries anyway.
Removed the ".if defined(LDADD)" around the _EXTRADEPEND target for
shared libraries. This target is always necessary now, because
c++rt0.o is linked into every shared library.
Don't merge this into -2.2 without first merging the support for
"gcc -shared".
latin1 looks very ugly on Russian screens/printers and users should
be able to print/view handbook first without inner knowledge of
bsd.sgml.mk tuning.
with these files MUST understand what a `make release' does before
making changes like this or get nasty-grams from me when my builds start
falling over. In fact, if they can't test "make release" after making
such changes then they *should leave these files completely alone*.
Thank you.
opt_smp_invltlb.h
from:
SMPHDRS= opt_smp.h opt_smp_invltlb.h
SMP_INVLTLB is no longer a valid config option, the invalidation of the TLB
via inter-CPU IPIs is now standard when APIC_IO is used.
file so that we fail if it isn't already installed. The bootstrap
is now done by `make install' in the top-level src directory. As
well as being gross, the rule didn't actually work for src trees
other than /usr/src, and this is difficult to fix since the whole
src tree may not exist.
(default: IS_DEPENDED?=install) target on the depended port, call
DEPENDS_TARGET (default: install) from the depending port.
Other than being more flexible (some ports don't require the
dependency to be fully installed: see ghostscript4), this seems
like a more natural thing to do. (I never understood the
convoluted logic that was used before.)
By building packages with "DEPENDS_TARGET=package", I can avoid
file-sharing problems (like gs3 binary going into the gs4
package).
(2) Add new variable PATCH_SITE_SUBDIR and separate it from
MASTER_SITE_SUBDIR. Fixes linuxls port and is a correct thing to
do anyway.
Initially suggested and reviewed by: fenner
(3) Add new variable MASTER_SITE_LOCAL for local ports. Defaults to
LOCAL_PORTS subdir on ftp.freebsd.org's distfiles dir.
Submitted by: jkh
make world fails when it tries to build LKMs because the files
opt_smp.h
opt_smp_invltbl.h
are missing.
This patch to /usr/src/share/mk/bsd.kmod.mk is a temporary workaround.
Note that LKMs built in this way may or may NOT work properly with an
SMP kernel.
Fixed back to front -X and -x strip flags in .m.o and .m.po rules.
Fixed disordered .m.o and .m.po rules. What is .m?
Stripping probably should be removed. It makes problems in library
functions hard to debug...
for how to use gcc to invoke the linker only.
Removed `.if 0'ed support for not creating intermediate object files.
Removed unused include of bsd.libnames.mk (LDONLY had the last reference
to it).
Removed stale misplaced comment about MANDEPEND.
means.
(2) Change MASTER_SITE_GNU etc. to use += instead of ?=, so users can
specify a local mirror in /etc/make.conf and still get the full
fallback in case something is missing.
Submitted by: Narvi <narvi@haldjas.folklore.ee>
(3) Skip port if USE_X11 or USE_IMAKE is defined and /usr/X11R6
doesn't exist.
Submitted by: imp
(4) Add "-" in front of rmdir of ${DISTDIR}/${DIST_SUBDIR} in
distclean target; the directory might not be empty because the
subdir is shared with some other ports' distfiles.
almost perfect dependencies on crt0's and libraries. DPADD and
bsd.libnames.mk should go away soon. Use a new _EXTRADEPEND target
to implement this and to avoid editing of .depend when .depend isn;t
being rebuilt. The afterdepend target doesn't seem to be good for
anything and is now unused.
Fixed LDDESTDIR for the DESTDIR case when ${SHLIBDIR} != /usr/lib.
Added commented-out -nostdlib to LDDESTDIR for the DESTDIR case.
The wrong libraries may be used without this; however it breaks
linkage to crt0 and libc.
is most useful for centralizing the definitions of paths to contrib
directories.
Removed useless subshell and evil-hiding @ in the the rule for
initializing the info dir.
'make -j3 world' works
Jordan points out that this may not be the only place this is required to be
added, but so far, its the only one I've found to break -j3
interesting problems because the resulting file is newer than the source
and this stops 'make' from rebuilding it. Go via an intermediate file
and rename to make sure this doesn't happen.
to before they are used in .for loops and .SUFFIXES lists, or it
doesn't work! Without this, 'make all' doesn't gzip the result as the
generated 'all' target doesn't seem to be defined completely.
bsd.doc.mk:
rename GZIPCMD to DCOMPRESS_CMD, add DCOMPRESS_EXT
bsd.info.mk:
rename GZIPCMD to ICOMPRESS_CMD, add ICOMPRESS_EXT
set INFOTMPL to ${INFODIR}/dir-tmpl
bsd.man.mk
rename ZEXTENSION to MCOMPRESS_EXT, MCOMPRESS to MCOMPRESS_CMD
mv, respectively. This will make Warner's life easier.
(2) Add new variable ${PLIST}, which defaults to ${PKGDIR}/PLIST.
If you need to have different PLISTs for different configurations,
you can either
@ pre-fabricate all of them and switch ${PLIST} to point to the
appropriate one, or
@ use sed/awk/perl/whatever to create the correct one from
pkg/PLIST and set ${PLIST} to it.
It is still recommended to have a file called "pkg/PLIST" so
people can do "grep badprog /usr/ports/*/*/pkg/PLIST" and such.
(3) Move /var/db/pkg/${PKGNAME} clash detection to before the
installation (instead of after) and make it fatal, with an error
message suggesting a workaround.
(4) Don't make distclean fail if DIST_SUBDIR is set and the
subdirectory does not exist.
(5) Don't put "@pkgdep Error code 2. Stop." kind of garbage into
packing list if depended port's directory doesn't exist. Instead,
print out a message to stderr.
${PORTSDIR}. This undoes the changes done in rev. 1.38 and 1.59
(part of the bsd.port.mk pre-dawn ages I've never understood).
Requested by: jkh
(2) Add new variable NO_IGNORE that will override any IGNORE causes.
This is just a little hack to allow building of REQUIRES_MOTIF
ports and its dependencies only etc., so don't document it.
(3) Update +REQUIRED_BY files as necessary. Now you should be able to
delete ports that have runtime dependencies without pkg_delete
complaining about this file missing.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Sorry, I know it's a gross fix to call share/info's install target as
a side-effect, but that's less gross than propagating the work-around
changes to files which have nothing to do with the info system.
the original logic went into a section of code assuming some
incarnation is there, but it's basically a "test -d" fix. Closes PR
ports/2082.
Reviewed by: max ("although I didn't test it, it looks fine")
(1) Change commented out MAINTAINER to FreeBSD_MAINTAINER and
OpenBSD_MAINTAINER. These are not comments anymore, so we may
even use it in the future.
(2) Instead of the ".if ${OPSYS} = "NetBSD" hack, use ".if exists()"
to find the location of md5 an tar. Play similar trick for fetch
(OpenBSD uses /usr/bin/ftp which groks http: addresses).
This commit includes most of the changes made in 1.242 (although many
of them are done differently after more discussion). One thing that
is conspicuously missing is NOMANCOMPRESS, which has been postponed
until Warner figures out what exactly the situation is on the OpenBSD
ports paradigm. (In a nutshell, we can't just define NOMANCOMPRESS in
this file even if uncompressed manpages is the default for OpenBSD,
because that will take away the ability of individual users to select
manpage compression.)
Reviewed by: imp@openbsd.org
and scripts/{pre,post}-* as environment vars. Also, if BATCH is
set, "BATCH=yes" is automatically added to SCRIPTS_ENV.
(Requested by: max)
(2) The INSTALL_* macros are added to SCRIPTS_ENV and MAKE_ENV as
BSD_INSTALL_*. (Requested by: obrien)
(3) New variable MOTIF_ONLY, which will only build ports with
REQUIRES_MOTIF defined. This doesn't do dependencies right (what
if the depended port doesn't need Motif) yet.
(4) Try not to clean the same port twice in clean-depends when (for
instance) it's defined in both BUILD_DEPENDS and INSTALL_DEPENDS.
Note that it won't check chained dependencies so you may still see
the same port cleaned multiple times, but checking that far will
surely make this run slower than the un-"optimized" case so I left
it as is. (Requested by: jkh)
(5) Ignore *.rej files in patches/ directory in addition to *~ and
*.orig.
into the DESTDIR in the beforeinstall rule in src/share/info/Makefile.
Then each info file that gets installed into the dir file using
install-info.
It has struck me that there's going to be a problem bootstrapping
this change, since parts of install will fail until install-info
is installed. Maybe someone who knows best how to deal with this can
fix it.
Generalize the selection of programs to run based on the existance of files
rather than the OS names that we find. Add comments about me being the
keeper of the OpenBSD mods of this file. Use ftp on OpenBSD rather than
fetch since OpenBSD's FTP supports urls and there is no fetch.
Reviewed by: Joerge Wunch, Jordan Hubbard, and others in ports I've forgotten
Obtained from: OpenBSD with changes from me.
Add a little more sophistication to the md5 grep command.
Change the md5 checksum logic a bit. Now, the message is printed
out for every successfully/unsuccessfully matched checksum, and it
aborts at the end if there was a mismatch. Also, make missing checksum
and IGNORE file inconsistency fatal, as there is now no reason to have
a missing checksum.
of PRINTER for defining the default output device when formatting
documents for installation. This prevents problems if the
user has defined PRINTER for use by lpr.
Closes PR# 1437.
(1) MANLANG is now a list (defaulting to ""), so if you have English
and Japanese-EUC versions of the manpages, you can say something
like `MANLANG= "" ja_JP.EUC' and manpage compression will DTRT.
(2) Add new variables MAN%cPREFIX (where %c=[1-9LN]) which default to
MANPREFIX (which defaults to PREFIX), to specify per-section
prefixes. In particular, this handles the cases in many perl
ports, which install man1pages into man/man1 and man3pages into
lib/perl5/man/man3.
Note these modifications won't change the behavior of existing
variables used in previously-approved ways, so any Makefile that
worked before will still continue to work.
